summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000e
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e')
-rw-r--r--drivers/net/ethernet/intel/e1000e/e1000.h6
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.c15
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c35
-rw-r--r--drivers/net/ethernet/intel/e1000e/param.c99
4 files changed, 102 insertions, 53 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 86cdd479399..b83897f76ee 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -161,6 +161,12 @@ struct e1000_info;
/* Time to wait before putting the device into D3 if there's no link (in ms). */
#define LINK_TIMEOUT 100
+/*
+ * Count for polling __E1000_RESET condition every 10-20msec.
+ * Experimentation has shown the reset can take approximately 210msec.
+ */
+#define E1000_CHECK_RESET_COUNT 25
+
#define DEFAULT_RDTR 0
#define DEFAULT_RADV 8
#define BURST_RDTR 0x20
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 64c76443a7a..b461c24945e 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1310,10 +1310,6 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
if (mac_reg & E1000_PHY_CTRL_D0A_LPLU)
oem_reg |= HV_OEM_BITS_LPLU;
-
- /* Set Restart auto-neg to activate the bits */
- if (!hw->phy.ops.check_reset_block(hw))
- oem_reg |= HV_OEM_BITS_RESTART_AN;
} else {
if (mac_reg & (E1000_PHY_CTRL_GBE_DISABLE |
E1000_PHY_CTRL_NOND0A_GBE_DISABLE))
@@ -1324,6 +1320,11 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
oem_reg |= HV_OEM_BITS_LPLU;
}
+ /* Set Restart auto-neg to activate the bits */
+ if ((d0_state || (hw->mac.type != e1000_pchlan)) &&
+ !hw->phy.ops.check_reset_block(hw))
+ oem_reg |= HV_OEM_BITS_RESTART_AN;
+
ret_val = hw->phy.ops.write_reg_locked(hw, HV_OEM_BITS, oem_reg);
release:
@@ -3682,7 +3683,11 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
if (hw->mac.type >= e1000_pchlan) {
e1000_oem_bits_config_ich8lan(hw, false);
- e1000_phy_hw_reset_ich8lan(hw);
+
+ /* Reset PHY to activate OEM bits on 82577/8 */
+ if (hw->mac.type == e1000_pchlan)
+ e1000e_phy_hw_reset_generic(hw);
+
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
return;
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 7152eb11b7b..9520a6ac1f3 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -60,6 +60,11 @@
char e1000e_driver_name[] = "e1000e";
const char e1000e_driver_version[] = DRV_VERSION;
+#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
+static int debug = -1;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state);
static const struct e1000_info *e1000_info_tbl[] = {
@@ -1054,6 +1059,13 @@ static void e1000_print_hw_hang(struct work_struct *work)
ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
/* execute the writes immediately */
e1e_flush();
+ /*
+ * Due to rare timing issues, write to TIDV again to ensure
+ * the write is successful
+ */
+ ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
+ /* execute the writes immediately */
+ e1e_flush();
adapter->tx_hang_recheck = true;
return;
}
@@ -3611,6 +3623,16 @@ static void e1000e_flush_descriptors(struct e1000_adapter *adapter)
/* execute the writes immediately */
e1e_flush();
+
+ /*
+ * due to rare timing issues, write to TIDV/RDTR again to ensure the
+ * write is successful
+ */
+ ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
+ ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
+
+ /* execute the writes immediately */
+ e1e_flush();
}
static void e1000e_update_stats(struct e1000_adapter *adapter);
@@ -3777,7 +3799,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
/* fire an unusual interrupt on the test handler */
ew32(ICS, E1000_ICS_RXSEQ);
e1e_flush();
- msleep(50);
+ msleep(100);
e1000_irq_disable(adapter);
@@ -3963,6 +3985,10 @@ static int e1000_close(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct pci_dev *pdev = adapter->pdev;
+ int count = E1000_CHECK_RESET_COUNT;
+
+ while (test_bit(__E1000_RESETTING, &adapter->state) && count--)
+ usleep_range(10000, 20000);
WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
@@ -5467,6 +5493,11 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
netif_device_detach(netdev);
if (netif_running(netdev)) {
+ int count = E1000_CHECK_RESET_COUNT;
+
+ while (test_bit(__E1000_RESETTING, &adapter->state) && count--)
+ usleep_range(10000, 20000);
+
WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
e1000e_down(adapter);
e1000_free_irq(adapter);
@@ -6172,7 +6203,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
adapter->hw.adapter = adapter;
adapter->hw.mac.type = ei->mac;
adapter->max_hw_frame_size = ei->max_hw_frame_size;
- adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
+ adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
mmio_start = pci_resource_start(pdev, 0);
mmio_len = pci_resource_len(pdev, 0);
diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c
index ff796e42c3e..16adeb9418a 100644
--- a/drivers/net/ethernet/intel/e1000e/param.c
+++ b/drivers/net/ethernet/intel/e1000e/param.c
@@ -106,7 +106,7 @@ E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
/*
* Interrupt Throttle Rate (interrupts/sec)
*
- * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
+ * Valid Range: 100-100000 or one of: 0=off, 1=dynamic, 3=dynamic conservative
*/
E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
#define DEFAULT_ITR 3
@@ -344,53 +344,60 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
if (num_InterruptThrottleRate > bd) {
adapter->itr = InterruptThrottleRate[bd];
- switch (adapter->itr) {
- case 0:
- e_info("%s turned off\n", opt.name);
- break;
- case 1:
- e_info("%s set to dynamic mode\n", opt.name);
- adapter->itr_setting = adapter->itr;
- adapter->itr = 20000;
- break;
- case 3:
- e_info("%s set to dynamic conservative mode\n",
- opt.name);
- adapter->itr_setting = adapter->itr;
- adapter->itr = 20000;
- break;
- case 4:
- e_info("%s set to simplified (2000-8000 ints) "
- "mode\n", opt.name);
- adapter->itr_setting = 4;
- break;
- default:
- /*
- * Save the setting, because the dynamic bits
- * change itr.
- */
- if (e1000_validate_option(&adapter->itr, &opt,
- adapter) &&
- (adapter->itr == 3)) {
- /*
- * In case of invalid user value,
- * default to conservative mode.
- */
- adapter->itr_setting = adapter->itr;
- adapter->itr = 20000;
- } else {
- /*
- * Clear the lower two bits because
- * they are used as control.
- */
- adapter->itr_setting =
- adapter->itr & ~3;
- }
- break;
- }
+
+ /*
+ * Make sure a message is printed for non-special
+ * values. And in case of an invalid option, display
+ * warning, use default and got through itr/itr_setting
+ * adjustment logic below
+ */
+ if ((adapter->itr > 4) &&
+ e1000_validate_option(&adapter->itr, &opt, adapter))
+ adapter->itr = opt.def;
} else {
- adapter->itr_setting = opt.def;
+ /*
+ * If no option specified, use default value and go
+ * through the logic below to adjust itr/itr_setting
+ */
+ adapter->itr = opt.def;
+
+ /*
+ * Make sure a message is printed for non-special
+ * default values
+ */
+ if (adapter->itr > 40)
+ e_info("%s set to default %d\n", opt.name,
+ adapter->itr);
+ }
+
+ adapter->itr_setting = adapter->itr;
+ switch (adapter->itr) {
+ case 0:
+ e_info("%s turned off\n", opt.name);
+ break;
+ case 1:
+ e_info("%s set to dynamic mode\n", opt.name);
+ adapter->itr = 20000;
+ break;
+ case 3:
+ e_info("%s set to dynamic conservative mode\n",
+ opt.name);
adapter->itr = 20000;
+ break;
+ case 4:
+ e_info("%s set to simplified (2000-8000 ints) mode\n",
+ opt.name);
+ break;
+ default:
+ /*
+ * Save the setting, because the dynamic bits
+ * change itr.
+ *
+ * Clear the lower two bits because
+ * they are used as control.
+ */
+ adapter->itr_setting &= ~3;
+ break;
}
}
{ /* Interrupt Mode */
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-11-03 04:18:28 +0000