diff options
Diffstat (limited to 'drivers/net/e1000e/ich8lan.c')
| -rw-r--r-- | drivers/net/e1000e/ich8lan.c | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 5059c22155d..b8c4dce01a0 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -83,6 +83,8 @@ #define E1000_ICH_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI Reset */ +/* FW established a valid mode */ +#define E1000_ICH_FWSM_FW_VALID 0x00008000 #define E1000_ICH_MNG_IAMT_MODE 0x2 @@ -259,6 +261,7 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val) static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; + u32 ctrl; s32 ret_val = 0; phy->addr = 1; @@ -274,6 +277,33 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { + /* + * The MAC-PHY interconnect may still be in SMBus mode + * after Sx->S0. Toggle the LANPHYPC Value bit to force + * the interconnect to PCIe mode, but only if there is no + * firmware present otherwise firmware will have done it. + */ + ctrl = er32(CTRL); + ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE; + ctrl &= ~E1000_CTRL_LANPHYPC_VALUE; + ew32(CTRL, ctrl); + udelay(10); + ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE; + ew32(CTRL, ctrl); + msleep(50); + } + + /* + * Reset the PHY before any acccess to it. Doing so, ensures that + * the PHY is in a known good state before we read/write PHY registers. + * The generic reset is sufficient here, because we haven't determined + * the PHY type yet. + */ + ret_val = e1000e_phy_hw_reset_generic(hw); + if (ret_val) + goto out; + phy->id = e1000_phy_unknown; ret_val = e1000e_get_phy_id(hw); if (ret_val) |