diff options
Diffstat (limited to 'arch/sh/boards/mpc1211/pci.c')
| -rw-r--r-- | arch/sh/boards/mpc1211/pci.c | 295 | 
1 files changed, 0 insertions, 295 deletions
diff --git a/arch/sh/boards/mpc1211/pci.c b/arch/sh/boards/mpc1211/pci.c deleted file mode 100644 index 23849f70f13..00000000000 --- a/arch/sh/boards/mpc1211/pci.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - *	Low-Level PCI Support for the MPC-1211(CTP/PCI/MPC-SH02) - * - *  (c) 2002-2003 Saito.K & Jeanne - * - *  Dustin McIntire (dustin@sensoria.com) - *	Derived from arch/i386/kernel/pci-*.c which bore the message: - *	(c) 1999--2000 Martin Mares <mj@ucw.cz> - *	 - *  May be copied or modified under the terms of the GNU General Public - *  License.  See linux/COPYING for more information. - * - */ -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/errno.h> -#include <linux/irq.h> -#include <linux/interrupt.h> - -#include <asm/machvec.h> -#include <asm/io.h> -#include <asm/mpc1211/pci.h> - -static struct resource mpcpci_io_resource = { -	"MPCPCI IO", -	0x00000000, -	0xffffffff, -	IORESOURCE_IO -}; - -static struct resource mpcpci_mem_resource = { -	"MPCPCI mem", -	0x00000000, -	0xffffffff, -	IORESOURCE_MEM -}; - -static struct pci_ops pci_direct_conf1; -struct pci_channel board_pci_channels[] = { -	{&pci_direct_conf1, &mpcpci_io_resource, &mpcpci_mem_resource, 0, 256}, -	{NULL, NULL, NULL, 0, 0}, -}; - -/* - * Direct access to PCI hardware... - */ - - -#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) - -/* - * Functions for accessing PCI configuration space with type 1 accesses - */ -static int pci_conf1_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) -{ -	u32 word; -	unsigned long flags; - -	/*  -	 * PCIPDR may only be accessed as 32 bit words,  -	 * so we must do byte alignment by hand  -	 */ -	local_irq_save(flags); -	writel(CONFIG_CMD(bus,devfn,where), PCIPAR); -	word = readl(PCIPDR); -	local_irq_restore(flags); - -	switch (size) { -	case 1: -		switch (where & 0x3) { -		case 3: -			*value = (u8)(word >> 24); -			break; -		case 2: -			*value = (u8)(word >> 16); -			break; -		case 1: -			*value = (u8)(word >> 8); -			break; -		default: -			*value = (u8)word; -			break; -		} -		break; -	case 2: -		switch (where & 0x3) { -		case 3: -			*value = (u16)(word >> 24); -			local_irq_save(flags); -			writel(CONFIG_CMD(bus,devfn,(where+1)), PCIPAR); -			word = readl(PCIPDR); -			local_irq_restore(flags); -			*value |= ((word & 0xff) << 8); -			break; -		case 2: -			*value = (u16)(word >> 16); -			break; -		case 1: -			*value = (u16)(word >> 8); -			break; -		default: -			*value = (u16)word; -			break; -		} -		break; -	case 4: -		*value = word; -		break; -	} -	PCIDBG(4,"pci_conf1_read@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),*value);  -	return PCIBIOS_SUCCESSFUL;     -} - -/*  - * Since MPC-1211 only does 32bit access we'll have to do a read,mask,write operation.   - * We'll allow an odd byte offset, though it should be illegal. - */  -static int pci_conf1_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) -{ -	u32 word,mask = 0; -	unsigned long flags; -	u32 shift = (where & 3) * 8; - -	if(size == 1) { -		mask = ((1 << 8) - 1) << shift;  // create the byte mask -	} else if(size == 2){ -		if(shift == 24) -			return PCIBIOS_BAD_REGISTER_NUMBER;            -		mask = ((1 << 16) - 1) << shift;  // create the word mask -	} -	local_irq_save(flags); -	writel(CONFIG_CMD(bus,devfn,where), PCIPAR); -	if(size == 4){ -		writel(value, PCIPDR); -		local_irq_restore(flags); -		PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),value); -		return PCIBIOS_SUCCESSFUL; -	} -	word = readl(PCIPDR); -	word &= ~mask; -	word |= ((value << shift) & mask); -	writel(word, PCIPDR); -	local_irq_restore(flags); -	PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),word); -	return PCIBIOS_SUCCESSFUL; -} - -#undef CONFIG_CMD - -static struct pci_ops pci_direct_conf1 = { -	.read =		pci_conf1_read, -	.write = 	pci_conf1_write, -}; - -static void __devinit quirk_ali_ide_ports(struct pci_dev *dev) -{ -        dev->resource[0].start = 0x1f0; -	dev->resource[0].end   = 0x1f7; -	dev->resource[0].flags = IORESOURCE_IO; -        dev->resource[1].start = 0x3f6; -	dev->resource[1].end   = 0x3f6; -	dev->resource[1].flags = IORESOURCE_IO; -        dev->resource[2].start = 0x170; -	dev->resource[2].end   = 0x177; -	dev->resource[2].flags = IORESOURCE_IO; -        dev->resource[3].start = 0x376; -	dev->resource[3].end   = 0x376; -	dev->resource[3].flags = IORESOURCE_IO; -        dev->resource[4].start = 0xf000; -	dev->resource[4].end   = 0xf00f; -	dev->resource[4].flags = IORESOURCE_IO; -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, quirk_ali_ide_ports); - -char * __devinit pcibios_setup(char *str) -{ -	return str; -} - -/* - *  Called after each bus is probed, but before its children - *  are examined. - */ - -void __devinit pcibios_fixup_bus(struct pci_bus *b) -{ -	pci_read_bridge_bases(b); -} - -/*  - * 	IRQ functions  - */ -static inline u8 bridge_swizzle(u8 pin, u8 slot) -{ -        return (((pin-1) + slot) % 4) + 1; -} - -static inline u8 bridge_swizzle_pci_1(u8 pin, u8 slot) -{ -        return (((pin-1) - slot) & 3) + 1; -} - -static u8 __init mpc1211_swizzle(struct pci_dev *dev, u8 *pinp) -{ -	unsigned long flags; -        u8 pin = *pinp; -	u32 word; - -	for ( ; dev->bus->self; dev = dev->bus->self) { -		if (!pin) -			continue; - -		if (dev->bus->number == 1) { -			local_irq_save(flags); -			writel(0x80000000 | 0x2c, PCIPAR); -			word = readl(PCIPDR); -			local_irq_restore(flags); -			word >>= 16; - -			if (word == 0x0001) -				pin = bridge_swizzle_pci_1(pin, PCI_SLOT(dev->devfn)); -			else -				pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); -		} else -			pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); -	} - -	*pinp = pin; - -	return PCI_SLOT(dev->devfn); -} - -static int __init map_mpc1211_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ -	int irq = -1; - -	/* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */ -	if (dev->bus->number == 0) { -		switch (slot) { -		case 13:   irq =  9; break;   /* USB */ -		case 22:   irq = 10; break;   /* LAN */ -		default:   irq =  0; break; -	  	} -	} else { -		switch (pin) { -		case 0:   irq =  0; break; -		case 1:   irq =  7; break; -		case 2:   irq =  9; break; -		case 3:   irq = 10; break; -		case 4:   irq = 11; break; -		} -	} - -	if( irq < 0 ) { -		PCIDBG(3, "PCI: Error mapping IRQ on device %s\n", pci_name(dev)); -		return irq; -	} -	 -	PCIDBG(2, "Setting IRQ for slot %s to %d\n", pci_name(dev), irq); - -	return irq; -} - -void __init pcibios_fixup_irqs(void) -{ -	pci_fixup_irqs(mpc1211_swizzle, map_mpc1211_irq); -} - -void pcibios_align_resource(void *data, struct resource *res, -			    resource_size_t size, resource_size_t align) -{ -	resource_size_t start = res->start; - -	if (res->flags & IORESOURCE_IO) { -		if (start >= 0x10000UL) { -			if ((start & 0xffffUL) < 0x4000UL) { -				start = (start & 0xffff0000UL) + 0x4000UL; -			} else if ((start & 0xffffUL) >= 0xf000UL) { -				start = (start & 0xffff0000UL) + 0x10000UL; -			} -			res->start = start; -		} else { -			if (start & 0x300) { -				start = (start + 0x3ff) & ~0x3ff; -				res->start = start; -			} -		} -	} -} -  |