diff options
Diffstat (limited to 'arch/mips/pci/ops-pmcmsp.c')
| -rw-r--r-- | arch/mips/pci/ops-pmcmsp.c | 994 |
1 files changed, 994 insertions, 0 deletions
diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c new file mode 100644 index 00000000000..09fa007c1d1 --- /dev/null +++ b/arch/mips/pci/ops-pmcmsp.c @@ -0,0 +1,994 @@ +/* + * PMC-Sierra MSP board specific pci_ops + * + * Copyright 2001 MontaVista Software Inc. + * Copyright 2005-2007 PMC-Sierra, Inc + * + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * Much of the code is derived from the original DDB5074 port by + * Geert Uytterhoeven <geert@sonycom.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#define PCI_COUNTERS 1 + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/interrupt.h> + +#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#endif /* CONFIG_PROC_FS && PCI_COUNTERS */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/byteorder.h> +#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) +#include <asm/mipsmtregs.h> +#endif + +#include <msp_prom.h> +#include <msp_cic_int.h> +#include <msp_pci.h> +#include <msp_regs.h> +#include <msp_regops.h> + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + +#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) +static char proc_init; +extern struct proc_dir_entry *proc_bus_pci_dir; +unsigned int pci_int_count[32]; + +static void pci_proc_init(void); + +/***************************************************************************** + * + * FUNCTION: read_msp_pci_counts + * _________________________________________________________________________ + * + * DESCRIPTION: Prints the count of how many times each PCI + * interrupt has asserted. Can be invoked by the + * /proc filesystem. + * + * INPUTS: page - part of STDOUT calculation + * off - part of STDOUT calculation + * count - part of STDOUT calculation + * data - unused + * + * OUTPUTS: start - new start location + * eof - end of file pointer + * + * RETURNS: len - STDOUT length + * + ****************************************************************************/ +static int read_msp_pci_counts(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int i; + int len = 0; + unsigned int intcount, total = 0; + + for (i = 0; i < 32; ++i) { + intcount = pci_int_count[i]; + if (intcount != 0) { + len += sprintf(page + len, "[%d] = %u\n", i, intcount); + total += intcount; + } + } + + len += sprintf(page + len, "total = %u\n", total); + if (len <= off+count) + *eof = 1; + + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + + return len; +} + +/***************************************************************************** + * + * FUNCTION: gen_pci_cfg_wr + * _________________________________________________________________________ + * + * DESCRIPTION: Generates a configuration write cycle for debug purposes. + * The IDSEL line asserted and location and data written are + * immaterial. Just want to be able to prove that a + * configuration write can be correctly generated on the + * PCI bus. Intent is that this function by invocable from + * the /proc filesystem. + * + * INPUTS: page - part of STDOUT calculation + * off - part of STDOUT calculation + * count - part of STDOUT calculation + * data - unused + * + * OUTPUTS: start - new start location + * eof - end of file pointer + * + * RETURNS: len - STDOUT length + * + ****************************************************************************/ +static int gen_pci_cfg_wr(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + unsigned char where = 0; /* Write to static Device/Vendor ID */ + unsigned char bus_num = 0; /* Bus 0 */ + unsigned char dev_fn = 0xF; /* Arbitrary device number */ + u32 wr_data = 0xFF00AA00; /* Arbitrary data */ + struct msp_pci_regs *preg = (void *)PCI_BASE_REG; + int len = 0; + unsigned long value; + int intr; + + len += sprintf(page + len, "PMC MSP PCI: Beginning\n"); + + if (proc_init == 0) { + pci_proc_init(); + proc_init = ~0; + } + + len += sprintf(page + len, "PMC MSP PCI: Before Cfg Wr\n"); + + /* + * Generate PCI Configuration Write Cycle + */ + + /* Clear cause register bits */ + preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F); + + /* Setup address that is to appear on PCI bus */ + preg->config_addr = BPCI_CFGADDR_ENABLE | + (bus_num << BPCI_CFGADDR_BUSNUM_SHF) | + (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) | + (where & 0xFC); + + value = cpu_to_le32(wr_data); + + /* Launch the PCI configuration write cycle */ + *PCI_CONFIG_SPACE_REG = value; + + /* + * Check if the PCI configuration cycle (rd or wr) succeeded, by + * checking the status bits for errors like master or target abort. + */ + intr = preg->if_status; + + len += sprintf(page + len, "PMC MSP PCI: After Cfg Wr\n"); + + /* Handle STDOUT calculations */ + if (len <= off+count) + *eof = 1; + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + + return len; +} + +/***************************************************************************** + * + * FUNCTION: pci_proc_init + * _________________________________________________________________________ + * + * DESCRIPTION: Create entries in the /proc filesystem for debug access. + * + * INPUTS: none + * + * OUTPUTS: none + * + * RETURNS: none + * + ****************************************************************************/ +static void pci_proc_init(void) +{ + create_proc_read_entry("pmc_msp_pci_rd_cnt", 0, NULL, + read_msp_pci_counts, NULL); + create_proc_read_entry("pmc_msp_pci_cfg_wr", 0, NULL, + gen_pci_cfg_wr, NULL); +} +#endif /* CONFIG_PROC_FS && PCI_COUNTERS */ + +spinlock_t bpci_lock = SPIN_LOCK_UNLOCKED; + +/***************************************************************************** + * + * STRUCT: pci_io_resource + * _________________________________________________________________________ + * + * DESCRIPTION: Defines the address range that pciauto() will use to + * assign to the I/O BARs of PCI devices. + * + * Use the start and end addresses of the MSP7120 PCI Host + * Controller I/O space, in the form that they appear on the + * PCI bus AFTER MSP7120 has performed address translation. + * + * For I/O accesses, MSP7120 ignores OATRAN and maps I/O + * accesses into the bottom 0xFFF region of address space, + * so that is the range to put into the pci_io_resource + * struct. + * + * In MSP4200, the start address was 0x04 instead of the + * expected 0x00. Will just assume there was a good reason + * for this! + * + * NOTES: Linux, by default, will assign I/O space to the lowest + * region of address space. Since MSP7120 and Linux, + * by default, have no offset in between how they map, the + * io_offset element of pci_controller struct should be set + * to zero. + * ELEMENTS: + * name - String used for a meaningful name. + * + * start - Start address of MSP7120's I/O space, as MSP7120 presents + * the address on the PCI bus. + * + * end - End address of MSP7120's I/O space, as MSP7120 presents + * the address on the PCI bus. + * + * flags - Attributes indicating the type of resource. In this case, + * indicate I/O space. + * + ****************************************************************************/ +static struct resource pci_io_resource = { + .name = "pci IO space", + .start = 0x04, + .end = 0x0FFF, + .flags = IORESOURCE_IO /* I/O space */ +}; + +/***************************************************************************** + * + * STRUCT: pci_mem_resource + * _________________________________________________________________________ + * + * DESCRIPTION: Defines the address range that pciauto() will use to + * assign to the memory BARs of PCI devices. + * + * The .start and .end values are dependent upon how address + * translation is performed by the OATRAN regiser. + * + * The values to use for .start and .end are the values + * in the form they appear on the PCI bus AFTER MSP7120 has + * performed OATRAN address translation. + * + * ELEMENTS: + * name - String used for a meaningful name. + * + * start - Start address of MSP7120's memory space, as MSP7120 presents + * the address on the PCI bus. + * + * end - End address of MSP7120's memory space, as MSP7120 presents + * the address on the PCI bus. + * + * flags - Attributes indicating the type of resource. In this case, + * indicate memory space. + * + ****************************************************************************/ +static struct resource pci_mem_resource = { + .name = "pci memory space", + .start = MSP_PCI_SPACE_BASE, + .end = MSP_PCI_SPACE_END, + .flags = IORESOURCE_MEM /* memory space */ +}; + +/***************************************************************************** + * + * FUNCTION: bpci_interrupt + * _________________________________________________________________________ + * + * DESCRIPTION: PCI status interrupt handler. Updates the count of how + * many times each status bit has been set, then clears + * the status bits. If the appropriate macros are defined, + * these counts can be viewed via the /proc filesystem. + * + * INPUTS: irq - unused + * dev_id - unused + * pt_regs - unused + * + * OUTPUTS: none + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * + ****************************************************************************/ +static int bpci_interrupt(int irq, void *dev_id) +{ + struct msp_pci_regs *preg = (void *)PCI_BASE_REG; + unsigned int stat = preg->if_status; + +#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) + int i; + for (i = 0; i < 32; ++i) { + if ((1 << i) & stat) + ++pci_int_count[i]; + } +#endif /* PROC_FS && PCI_COUNTERS */ + + /* printk("PCI ISR: Status=%08X\n", stat); */ + + /* write to clear all asserted interrupts */ + preg->if_status = stat; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_config_access + * _________________________________________________________________________ + * + * DESCRIPTION: Performs a PCI configuration access (rd or wr), then + * checks that the access succeeded by querying MSP7120's + * PCI status bits. + * + * INPUTS: + * access_type - kind of PCI configuration cycle to perform + * (read or write). Legal values are + * PCI_ACCESS_WRITE and PCI_ACCESS_READ. + * + * bus - pointer to the bus number of the device to + * be targetted for the configuration cycle. + * The only element of the pci_bus structure + * used is bus->number. This argument determines + * if the configuration access will be Type 0 or + * Type 1. Since MSP7120 assumes itself to be the + * PCI Host, any non-zero bus->number generates + * a Type 1 access. + * + * devfn - this is an 8-bit field. The lower three bits + * specify the function number of the device to + * be targetted for the configuration cycle, with + * all three-bit combinations being legal. The + * upper five bits specify the device number, + * with legal values being 10 to 31. + * + * where - address within the Configuration Header + * space to access. + * + * data - for write accesses, contains the data to + * write. + * + * OUTPUTS: + * data - for read accesses, contains the value read. + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - access failure + * + ****************************************************************************/ +int msp_pcibios_config_access(unsigned char access_type, + struct pci_bus *bus, + unsigned int devfn, + unsigned char where, + u32 *data) +{ + struct msp_pci_regs *preg = (void *)PCI_BASE_REG; + unsigned char bus_num = bus->number; + unsigned char dev_fn = (unsigned char)devfn; + unsigned long flags; + unsigned long intr; + unsigned long value; + static char pciirqflag; +#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) + unsigned int vpe_status; +#endif + +#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) + if (proc_init == 0) { + pci_proc_init(); + proc_init = ~0; + } +#endif /* CONFIG_PROC_FS && PCI_COUNTERS */ + + /* + * Just the first time this function invokes, allocate + * an interrupt line for PCI host status interrupts. The + * allocation assigns an interrupt handler to the interrupt. + */ + if (pciirqflag == 0) { + request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */ + bpci_interrupt, + SA_SHIRQ | SA_INTERRUPT, + "PMC MSP PCI Host", + preg); + pciirqflag = ~0; + } + +#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) + local_irq_save(flags); + vpe_status = dvpe(); +#else + spin_lock_irqsave(&bpci_lock, flags); +#endif + + /* + * Clear PCI cause register bits. + * + * In Polo, the PCI Host had a dedicated DMA called the + * Block Copy (not to be confused with the general purpose Block + * Copy Engine block). There appear to have been special interrupts + * for this Block Copy, called Block Copy 0 Fault (BC0F) and + * Block Copy 1 Fault (BC1F). MSP4200 and MSP7120 don't have this + * dedicated Block Copy block, so these two interrupts are now + * marked reserved. In case the Block Copy is resurrected in a + * future design, maintain the code that treats these two interrupts + * specially. + * + * Write to clear all interrupts in the PCI status register, aside + * from BC0F and BC1F. + */ + preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F); + + /* Setup address that is to appear on PCI bus */ + preg->config_addr = BPCI_CFGADDR_ENABLE | + (bus_num << BPCI_CFGADDR_BUSNUM_SHF) | + (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) | + (where & 0xFC); + + /* IF access is a PCI configuration write */ + if (access_type == PCI_ACCESS_WRITE) { + value = cpu_to_le32(*data); + *PCI_CONFIG_SPACE_REG = value; + } else { + /* ELSE access is a PCI configuration read */ + value = le32_to_cpu(*PCI_CONFIG_SPACE_REG); + *data = value; + } + + /* + * Check if the PCI configuration cycle (rd or wr) succeeded, by + * checking the status bits for errors like master or target abort. + */ + intr = preg->if_status; + + /* Clear config access */ + preg->config_addr = 0; + + /* IF error occurred */ + if (intr & ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F)) { + /* Clear status bits */ + preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F); + +#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) + evpe(vpe_status); + local_irq_restore(flags); +#else + spin_unlock_irqrestore(&bpci_lock, flags); +#endif + + return -1; + } + +#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) + evpe(vpe_status); + local_irq_restore(flags); +#else + spin_unlock_irqrestore(&bpci_lock, flags); +#endif + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_read_config_byte + * _________________________________________________________________________ + * + * DESCRIPTION: Read a byte from PCI configuration address spac + * Since the hardware can't address 8 bit chunks + * directly, read a 32-bit chunk, then mask off extraneous + * bits. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the read is destined for. + * devfn - device/function combination that the read is + * destined for. + * where - register within the Configuration Header space + * to access. + * + * OUTPUTS val - read data + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - read access failure + * + ****************************************************************************/ +static int +msp_pcibios_read_config_byte(struct pci_bus *bus, + unsigned int devfn, + int where, + u32 *val) +{ + u32 data = 0; + + /* + * If the config access did not complete normally (e.g., underwent + * master abort) do the PCI compliant thing, which is to supply an + * all ones value. + */ + if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) { + *val = 0xFFFFFFFF; + return -1; + } + + *val = (data >> ((where & 3) << 3)) & 0x0ff; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_read_config_word + * _________________________________________________________________________ + * + * DESCRIPTION: Read a word (16 bits) from PCI configuration address space. + * Since the hardware can't address 16 bit chunks + * directly, read a 32-bit chunk, then mask off extraneous + * bits. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the read is destined for. + * devfn - device/function combination that the read is + * destined for. + * where - register within the Configuration Header space + * to access. + * + * OUTPUTS val - read data + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * PCIBIOS_BAD_REGISTER_NUMBER - bad register address + * -1 - read access failure + * + ****************************************************************************/ +static int +msp_pcibios_read_config_word(struct pci_bus *bus, + unsigned int devfn, + int where, + u32 *val) +{ + u32 data = 0; + + /* if (where & 1) */ /* Commented out non-compliant code. + * Should allow word access to configuration + * registers, with only exception being when + * the word access would wrap around into + * the next dword. + */ + if ((where & 3) == 3) { + *val = 0xFFFFFFFF; + return PCIBIOS_BAD_REGISTER_NUMBER; + } + + /* + * If the config access did not complete normally (e.g., underwent + * master abort) do the PCI compliant thing, which is to supply an + * all ones value. + */ + if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) { + *val = 0xFFFFFFFF; + return -1; + } + + *val = (data >> ((where & 3) << 3)) & 0x0ffff; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_read_config_dword + * _________________________________________________________________________ + * + * DESCRIPTION: Read a double word (32 bits) from PCI configuration + * address space. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the read is destined for. + * devfn - device/function combination that the read is + * destined for. + * where - register within the Configuration Header space + * to access. + * + * OUTPUTS val - read data + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * PCIBIOS_BAD_REGISTER_NUMBER - bad register address + * -1 - read access failure + * + ****************************************************************************/ +static int +msp_pcibios_read_config_dword(struct pci_bus *bus, + unsigned int devfn, + int where, + u32 *val) +{ + u32 data = 0; + + /* Address must be dword aligned. */ + if (where & 3) { + *val = 0xFFFFFFFF; + return PCIBIOS_BAD_REGISTER_NUMBER; + } + + /* + * If the config access did not complete normally (e.g., underwent + * master abort) do the PCI compliant thing, which is to supply an + * all ones value. + */ + if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) { + *val = 0xFFFFFFFF; + return -1; + } + + *val = data; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_write_config_byte + * _________________________________________________________________________ + * + * DESCRIPTION: Write a byte to PCI configuration address space. + * Since the hardware can't address 8 bit chunks + * directly, a read-modify-write is performed. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * val - value to write + * + * OUTPUTS none + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - write access failure + * + ****************************************************************************/ +static int +msp_pcibios_write_config_byte(struct pci_bus *bus, + unsigned int devfn, + int where, + u8 val) +{ + u32 data = 0; + + /* read config space */ + if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) + return -1; + + /* modify the byte within the dword */ + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + + /* write back the full dword */ + if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, + where, &data)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_write_config_word + * _________________________________________________________________________ + * + * DESCRIPTION: Write a word (16-bits) to PCI configuration address space. + * Since the hardware can't address 16 bit chunks + * directly, a read-modify-write is performed. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * val - value to write + * + * OUTPUTS none + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * PCIBIOS_BAD_REGISTER_NUMBER - bad register address + * -1 - write access failure + * + ****************************************************************************/ +static int +msp_pcibios_write_config_word(struct pci_bus *bus, + unsigned int devfn, + int where, + u16 val) +{ + u32 data = 0; + + /* Fixed non-compliance: if (where & 1) */ + if ((where & 3) == 3) + return PCIBIOS_BAD_REGISTER_NUMBER; + + /* read config space */ + if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) + return -1; + + /* modify the word within the dword */ + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + + /* write back the full dword */ + if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, + where, &data)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_write_config_dword + * _________________________________________________________________________ + * + * DESCRIPTION: Write a double word (32-bits) to PCI configuration address + * space. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * val - value to write + * + * OUTPUTS none + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * PCIBIOS_BAD_REGISTER_NUMBER - bad register address + * -1 - write access failure + * + ****************************************************************************/ +static int +msp_pcibios_write_config_dword(struct pci_bus *bus, + unsigned int devfn, + int where, + u32 val) +{ + /* check that address is dword aligned */ + if (where & 3) + return PCIBIOS_BAD_REGISTER_NUMBER; + + /* perform write */ + if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, + where, &val)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_read_config + * _________________________________________________________________________ + * + * DESCRIPTION: Interface the PCI configuration read request with + * the appropriate function, based on how many bytes + * the read request is. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * size - in units of bytes, should be 1, 2, or 4. + * + * OUTPUTS val - value read, with any extraneous bytes masked + * to zero. + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - failure + * + ****************************************************************************/ +int +msp_pcibios_read_config(struct pci_bus *bus, + unsigned int devfn, + int where, + int size, + u32 *val) +{ + if (size == 1) { + if (msp_pcibios_read_config_byte(bus, devfn, where, val)) { + return -1; + } + } else if (size == 2) { + if (msp_pcibios_read_config_word(bus, devfn, where, val)) { + return -1; + } + } else if (size == 4) { + if (msp_pcibios_read_config_dword(bus, devfn, where, val)) { + return -1; + } + } else { + *val = 0xFFFFFFFF; + return -1; + } + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_write_config + * _________________________________________________________________________ + * + * DESCRIPTION: Interface the PCI configuration write request with + * the appropriate function, based on how many bytes + * the read request is. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * size - in units of bytes, should be 1, 2, or 4. + * val - value to write + * + * OUTPUTS: none + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - failure + * + ****************************************************************************/ +int +msp_pcibios_write_config(struct pci_bus *bus, + unsigned int devfn, + int where, + int size, + u32 val) +{ + if (size == 1) { + if (msp_pcibios_write_config_byte(bus, devfn, + where, (u8)(0xFF & val))) { + return -1; + } + } else if (size == 2) { + if (msp_pcibios_write_config_word(bus, devfn, + where, (u16)(0xFFFF & val))) { + return -1; + } + } else if (size == 4) { + if (msp_pcibios_write_config_dword(bus, devfn, where, val)) { + return -1; + } + } else { + return -1; + } + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * STRUCTURE: msp_pci_ops + * _________________________________________________________________________ + * + * DESCRIPTION: structure to abstract the hardware specific PCI + * configuration accesses. + * + * ELEMENTS: + * read - function for Linux to generate PCI Configuration reads. + * write - function for Linux to generate PCI Configuration writes. + * + ****************************************************************************/ +struct pci_ops msp_pci_ops = { + .read = msp_pcibios_read_config, + .write = msp_pcibios_write_config +}; + +/***************************************************************************** + * + * STRUCTURE: msp_pci_controller + * _________________________________________________________________________ + * + * Describes the attributes of the MSP7120 PCI Host Controller + * + * ELEMENTS: + * pci_ops - abstracts the hardware specific PCI configuration + * accesses. + * + * mem_resource - address range pciauto() uses to assign to PCI device + * memory BARs. + * + * mem_offset - offset between how MSP7120 outbound PCI memory + * transaction addresses appear on the PCI bus and how Linux + * wants to configure memory BARs of the PCI devices. + * MSP7120 does nothing funky, so just set to zero. + * + * io_resource - address range pciauto() uses to assign to PCI device + * I/O BARs. + * + * io_offset - offset between how MSP7120 outbound PCI I/O + * transaction addresses appear on the PCI bus and how + * Linux defaults to configure I/O BARs of the PCI devices. + * MSP7120 maps outbound I/O accesses into the bottom + * bottom 4K of PCI address space (and ignores OATRAN). + * Since the Linux default is to configure I/O BARs to the + * bottom 4K, no special offset is needed. Just set to zero. + * + ****************************************************************************/ +static struct pci_controller msp_pci_controller = { + .pci_ops = &msp_pci_ops, + .mem_resource = &pci_mem_resource, + .mem_offset = 0, + .io_resource = &pci_io_resource, + .io_offset = 0 +}; + +/***************************************************************************** + * + * FUNCTION: msp_pci_init + * _________________________________________________________________________ + * + * DESCRIPTION: Initialize the PCI Host Controller and register it with + * Linux so Linux can seize control of the PCI bus. + * + ****************************************************************************/ +void __init msp_pci_init(void) +{ + struct msp_pci_regs *preg = (void *)PCI_BASE_REG; + u32 id; + + /* Extract Device ID */ + id = read_reg32(PCI_JTAG_DEVID_REG, 0xFFFF) >> 12; + + /* Check if JTAG ID identifies MSP7120 */ + if (!MSP_HAS_PCI(id)) { + printk(KERN_WARNING "PCI: No PCI; id reads as %x\n", id); + goto no_pci; + } + + /* + * Enable flushing of the PCI-SDRAM queue upon a read + * of the SDRAM's Memory Configuration Register. + */ + *(unsigned long *)QFLUSH_REG_1 = 3; + + /* Configure PCI Host Controller. */ + preg->if_status = ~0; /* Clear cause register bits */ + preg->config_addr = 0; /* Clear config access */ + preg->oatran = MSP_PCI_OATRAN; /* PCI outbound addr translation */ + preg->if_mask = 0xF8BF87C0; /* Enable all PCI status interrupts */ + + /* configure so inb(), outb(), and family are functional */ + set_io_port_base(MSP_PCI_IOSPACE_BASE); + + /* Tell Linux the details of the MSP7120 PCI Host Controller */ + register_pci_controller(&msp_pci_controller); + + return; + +no_pci: + /* Disable PCI channel */ + printk(KERN_WARNING "PCI: no host PCI bus detected\n"); +} |