diff options
Diffstat (limited to 'arch/mips/alchemy/devboards/db1200.c')
| -rw-r--r-- | arch/mips/alchemy/devboards/db1200.c | 927 |
1 files changed, 927 insertions, 0 deletions
diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c new file mode 100644 index 00000000000..a83302b96c0 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1200.c @@ -0,0 +1,927 @@ +/* + * DBAu1200/PBAu1200 board platform device registration + * + * Copyright (C) 2008-2011 Manuel Lauss + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/dma-mapping.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/mmc/host.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/smc91x.h> +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1100_mmc.h> +#include <asm/mach-au1x00/au1xxx_dbdma.h> +#include <asm/mach-au1x00/au1200fb.h> +#include <asm/mach-au1x00/au1550_spi.h> +#include <asm/mach-db1x00/bcsr.h> +#include <asm/mach-db1x00/db1200.h> + +#include "platform.h" + +static const char *board_type_str(void) +{ + switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) { + case BCSR_WHOAMI_PB1200_DDR1: + case BCSR_WHOAMI_PB1200_DDR2: + return "PB1200"; + case BCSR_WHOAMI_DB1200: + return "DB1200"; + default: + return "(unknown)"; + } +} + +const char *get_system_type(void) +{ + return board_type_str(); +} + +static int __init detect_board(void) +{ + int bid; + + /* try the DB1200 first */ + bcsr_init(DB1200_BCSR_PHYS_ADDR, + DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); + if (BCSR_WHOAMI_DB1200 == BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) { + unsigned short t = bcsr_read(BCSR_HEXLEDS); + bcsr_write(BCSR_HEXLEDS, ~t); + if (bcsr_read(BCSR_HEXLEDS) != t) { + bcsr_write(BCSR_HEXLEDS, t); + return 0; + } + } + + /* okay, try the PB1200 then */ + bcsr_init(PB1200_BCSR_PHYS_ADDR, + PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS); + bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); + if ((bid == BCSR_WHOAMI_PB1200_DDR1) || + (bid == BCSR_WHOAMI_PB1200_DDR2)) { + unsigned short t = bcsr_read(BCSR_HEXLEDS); + bcsr_write(BCSR_HEXLEDS, ~t); + if (bcsr_read(BCSR_HEXLEDS) != t) { + bcsr_write(BCSR_HEXLEDS, t); + return 0; + } + } + + return 1; /* it's neither */ +} + +void __init board_setup(void) +{ + unsigned long freq0, clksrc, div, pfc; + unsigned short whoami; + + if (detect_board()) { + printk(KERN_ERR "NOT running on a DB1200/PB1200 board!\n"); + return; + } + + whoami = bcsr_read(BCSR_WHOAMI); + printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d" + " Board-ID %d Daughtercard ID %d\n", board_type_str(), + (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); + + /* SMBus/SPI on PSC0, Audio on PSC1 */ + pfc = __raw_readl((void __iomem *)SYS_PINFUNC); + pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); + pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3); + pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */ + __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); + wmb(); + + /* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from + * CPU clock; all other clock generators off/unused. + */ + div = (get_au1x00_speed() + 25000000) / 50000000; + if (div & 1) + div++; + div = ((div >> 1) - 1) & 0xff; + + freq0 = div << SYS_FC_FRDIV0_BIT; + __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); + wmb(); + freq0 |= SYS_FC_FE0; /* enable F0 */ + __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); + wmb(); + + /* psc0_intclk comes 1:1 from F0 */ + clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT; + __raw_writel(clksrc, (void __iomem *)SYS_CLKSRC); + wmb(); +} + +/******************************************************************************/ + +static struct mtd_partition db1200_spiflash_parts[] = { + { + .name = "spi_flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct flash_platform_data db1200_spiflash_data = { + .name = "s25fl001", + .parts = db1200_spiflash_parts, + .nr_parts = ARRAY_SIZE(db1200_spiflash_parts), + .type = "m25p10", +}; + +static struct spi_board_info db1200_spi_devs[] __initdata = { + { + /* TI TMP121AIDBVR temp sensor */ + .modalias = "tmp121", + .max_speed_hz = 2000000, + .bus_num = 0, + .chip_select = 0, + .mode = 0, + }, + { + /* Spansion S25FL001D0FMA SPI flash */ + .modalias = "m25p80", + .max_speed_hz = 50000000, + .bus_num = 0, + .chip_select = 1, + .mode = 0, + .platform_data = &db1200_spiflash_data, + }, +}; + +static struct i2c_board_info db1200_i2c_devs[] __initdata = { + { I2C_BOARD_INFO("24c04", 0x52), }, /* AT24C04-10 I2C eeprom */ + { I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */ + { I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec WM8731 */ +}; + +/**********************************************************************/ + +static void au1200_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long ioaddr = (unsigned long)this->IO_ADDR_W; + + ioaddr &= 0xffffff00; + + if (ctrl & NAND_CLE) { + ioaddr += MEM_STNAND_CMD; + } else if (ctrl & NAND_ALE) { + ioaddr += MEM_STNAND_ADDR; + } else { + /* assume we want to r/w real data by default */ + ioaddr += MEM_STNAND_DATA; + } + this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr; + if (cmd != NAND_CMD_NONE) { + __raw_writeb(cmd, this->IO_ADDR_W); + wmb(); + } +} + +static int au1200_nand_device_ready(struct mtd_info *mtd) +{ + return __raw_readl((void __iomem *)MEM_STSTAT) & 1; +} + +static const char *db1200_part_probes[] = { "cmdlinepart", NULL }; + +static struct mtd_partition db1200_nand_parts[] = { + { + .name = "NAND FS 0", + .offset = 0, + .size = 8 * 1024 * 1024, + }, + { + .name = "NAND FS 1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + }, +}; + +struct platform_nand_data db1200_nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(db1200_nand_parts), + .partitions = db1200_nand_parts, + .chip_delay = 20, + .part_probe_types = db1200_part_probes, + }, + .ctrl = { + .dev_ready = au1200_nand_device_ready, + .cmd_ctrl = au1200_nand_cmd_ctrl, + }, +}; + +static struct resource db1200_nand_res[] = { + [0] = { + .start = DB1200_NAND_PHYS_ADDR, + .end = DB1200_NAND_PHYS_ADDR + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device db1200_nand_dev = { + .name = "gen_nand", + .num_resources = ARRAY_SIZE(db1200_nand_res), + .resource = db1200_nand_res, + .id = -1, + .dev = { + .platform_data = &db1200_nand_platdata, + } +}; + +/**********************************************************************/ + +static struct smc91x_platdata db1200_eth_data = { + .flags = SMC91X_NOWAIT | SMC91X_USE_16BIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + +static struct resource db1200_eth_res[] = { + [0] = { + .start = DB1200_ETH_PHYS_ADDR, + .end = DB1200_ETH_PHYS_ADDR + 0xf, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DB1200_ETH_INT, + .end = DB1200_ETH_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device db1200_eth_dev = { + .dev = { + .platform_data = &db1200_eth_data, + }, + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(db1200_eth_res), + .resource = db1200_eth_res, +}; + +/**********************************************************************/ + +static struct resource db1200_ide_res[] = { + [0] = { + .start = DB1200_IDE_PHYS_ADDR, + .end = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DB1200_IDE_INT, + .end = DB1200_IDE_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1200_DSCR_CMD0_DMA_REQ1, + .end = AU1200_DSCR_CMD0_DMA_REQ1, + .flags = IORESOURCE_DMA, + }, +}; + +static u64 au1200_ide_dmamask = DMA_BIT_MASK(32); + +static struct platform_device db1200_ide_dev = { + .name = "au1200-ide", + .id = 0, + .dev = { + .dma_mask = &au1200_ide_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(db1200_ide_res), + .resource = db1200_ide_res, +}; + +/**********************************************************************/ + +/* SD carddetects: they're supposed to be edge-triggered, but ack + * doesn't seem to work (CPLD Rev 2). Instead, the screaming one + * is disabled and its counterpart enabled. The 500ms timeout is + * because the carddetect isn't debounced in hardware. + */ +static irqreturn_t db1200_mmc_cd(int irq, void *ptr) +{ + void(*mmc_cd)(struct mmc_host *, unsigned long); + + if (irq == DB1200_SD0_INSERT_INT) { + disable_irq_nosync(DB1200_SD0_INSERT_INT); + enable_irq(DB1200_SD0_EJECT_INT); + } else { + disable_irq_nosync(DB1200_SD0_EJECT_INT); + enable_irq(DB1200_SD0_INSERT_INT); + } + + /* link against CONFIG_MMC=m */ + mmc_cd = symbol_get(mmc_detect_change); + if (mmc_cd) { + mmc_cd(ptr, msecs_to_jiffies(500)); + symbol_put(mmc_detect_change); + } + + return IRQ_HANDLED; +} + +static int db1200_mmc_cd_setup(void *mmc_host, int en) +{ + int ret; + + if (en) { + ret = request_irq(DB1200_SD0_INSERT_INT, db1200_mmc_cd, + 0, "sd_insert", mmc_host); + if (ret) + goto out; + + ret = request_irq(DB1200_SD0_EJECT_INT, db1200_mmc_cd, + 0, "sd_eject", mmc_host); + if (ret) { + free_irq(DB1200_SD0_INSERT_INT, mmc_host); + goto out; + } + + if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) + enable_irq(DB1200_SD0_EJECT_INT); + else + enable_irq(DB1200_SD0_INSERT_INT); + + } else { + free_irq(DB1200_SD0_INSERT_INT, mmc_host); + free_irq(DB1200_SD0_EJECT_INT, mmc_host); + } + ret = 0; +out: + return ret; +} + +static void db1200_mmc_set_power(void *mmc_host, int state) +{ + if (state) { + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR); + msleep(400); /* stabilization time */ + } else + bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0); +} + +static int db1200_mmc_card_readonly(void *mmc_host) +{ + return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0; +} + +static int db1200_mmc_card_inserted(void *mmc_host) +{ + return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0; +} + +static void db1200_mmcled_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); +} + +static struct led_classdev db1200_mmc_led = { + .brightness_set = db1200_mmcled_set, +}; + +/* -- */ + +static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr) +{ + void(*mmc_cd)(struct mmc_host *, unsigned long); + + if (irq == PB1200_SD1_INSERT_INT) { + disable_irq_nosync(PB1200_SD1_INSERT_INT); + enable_irq(PB1200_SD1_EJECT_INT); + } else { + disable_irq_nosync(PB1200_SD1_EJECT_INT); + enable_irq(PB1200_SD1_INSERT_INT); + } + + /* link against CONFIG_MMC=m */ + mmc_cd = symbol_get(mmc_detect_change); + if (mmc_cd) { + mmc_cd(ptr, msecs_to_jiffies(500)); + symbol_put(mmc_detect_change); + } + + return IRQ_HANDLED; +} + +static int pb1200_mmc1_cd_setup(void *mmc_host, int en) +{ + int ret; + + if (en) { + ret = request_irq(PB1200_SD1_INSERT_INT, pb1200_mmc1_cd, 0, + "sd1_insert", mmc_host); + if (ret) + goto out; + + ret = request_irq(PB1200_SD1_EJECT_INT, pb1200_mmc1_cd, 0, + "sd1_eject", mmc_host); + if (ret) { + free_irq(PB1200_SD1_INSERT_INT, mmc_host); + goto out; + } + + if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) + enable_irq(PB1200_SD1_EJECT_INT); + else + enable_irq(PB1200_SD1_INSERT_INT); + + } else { + free_irq(PB1200_SD1_INSERT_INT, mmc_host); + free_irq(PB1200_SD1_EJECT_INT, mmc_host); + } + ret = 0; +out: + return ret; +} + +static void pb1200_mmc1led_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1); +} + +static struct led_classdev pb1200_mmc1_led = { + .brightness_set = pb1200_mmc1led_set, +}; + +static void pb1200_mmc1_set_power(void *mmc_host, int state) +{ + if (state) { + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR); + msleep(400); /* stabilization time */ + } else + bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0); +} + +static int pb1200_mmc1_card_readonly(void *mmc_host) +{ + return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0; +} + +static int pb1200_mmc1_card_inserted(void *mmc_host) +{ + return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0; +} + + +static struct au1xmmc_platform_data db1200_mmc_platdata[2] = { + [0] = { + .cd_setup = db1200_mmc_cd_setup, + .set_power = db1200_mmc_set_power, + .card_inserted = db1200_mmc_card_inserted, + .card_readonly = db1200_mmc_card_readonly, + .led = &db1200_mmc_led, + }, + [1] = { + .cd_setup = pb1200_mmc1_cd_setup, + .set_power = pb1200_mmc1_set_power, + .card_inserted = pb1200_mmc1_card_inserted, + .card_readonly = pb1200_mmc1_card_readonly, + .led = &pb1200_mmc1_led, + }, +}; + +static struct resource au1200_mmc0_resources[] = { + [0] = { + .start = AU1100_SD0_PHYS_ADDR, + .end = AU1100_SD0_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_SD_INT, + .end = AU1200_SD_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1200_DSCR_CMD0_SDMS_TX0, + .end = AU1200_DSCR_CMD0_SDMS_TX0, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1200_DSCR_CMD0_SDMS_RX0, + .end = AU1200_DSCR_CMD0_SDMS_RX0, + .flags = IORESOURCE_DMA, + } +}; + +static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32); + +static struct platform_device db1200_mmc0_dev = { + .name = "au1xxx-mmc", + .id = 0, + .dev = { + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1200_mmc_platdata[0], + }, + .num_resources = ARRAY_SIZE(au1200_mmc0_resources), + .resource = au1200_mmc0_resources, +}; + +static struct resource au1200_mmc1_res[] = { + [0] = { + .start = AU1100_SD1_PHYS_ADDR, + .end = AU1100_SD1_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_SD_INT, + .end = AU1200_SD_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1200_DSCR_CMD0_SDMS_TX1, + .end = AU1200_DSCR_CMD0_SDMS_TX1, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1200_DSCR_CMD0_SDMS_RX1, + .end = AU1200_DSCR_CMD0_SDMS_RX1, + .flags = IORESOURCE_DMA, + } +}; + +static struct platform_device pb1200_mmc1_dev = { + .name = "au1xxx-mmc", + .id = 1, + .dev = { + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1200_mmc_platdata[1], + }, + .num_resources = ARRAY_SIZE(au1200_mmc1_res), + .resource = au1200_mmc1_res, +}; + +/**********************************************************************/ + +static int db1200fb_panel_index(void) +{ + return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; +} + +static int db1200fb_panel_init(void) +{ + /* Apply power */ + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL); + return 0; +} + +static int db1200fb_panel_shutdown(void) +{ + /* Remove power */ + bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL, 0); + return 0; +} + +static struct au1200fb_platdata db1200fb_pd = { + .panel_index = db1200fb_panel_index, + .panel_init = db1200fb_panel_init, + .panel_shutdown = db1200fb_panel_shutdown, +}; + +static struct resource au1200_lcd_res[] = { + [0] = { + .start = AU1200_LCD_PHYS_ADDR, + .end = AU1200_LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_LCD_INT, + .end = AU1200_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32); + +static struct platform_device au1200_lcd_dev = { + .name = "au1200-lcd", + .id = 0, + .dev = { + .dma_mask = &au1200_lcd_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1200fb_pd, + }, + .num_resources = ARRAY_SIZE(au1200_lcd_res), + .resource = au1200_lcd_res, +}; + +/**********************************************************************/ + +static struct resource au1200_psc0_res[] = { + [0] = { + .start = AU1550_PSC0_PHYS_ADDR, + .end = AU1550_PSC0_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_PSC0_INT, + .end = AU1200_PSC0_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1200_DSCR_CMD0_PSC0_TX, + .end = AU1200_DSCR_CMD0_PSC0_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1200_DSCR_CMD0_PSC0_RX, + .end = AU1200_DSCR_CMD0_PSC0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1200_i2c_dev = { + .name = "au1xpsc_smbus", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(au1200_psc0_res), + .resource = au1200_psc0_res, +}; + +static void db1200_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol) +{ + if (cs) + bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_SPISEL); + else + bcsr_mod(BCSR_RESETS, BCSR_RESETS_SPISEL, 0); +} + +static struct au1550_spi_info db1200_spi_platdata = { + .mainclk_hz = 50000000, /* PSC0 clock */ + .num_chipselect = 2, + .activate_cs = db1200_spi_cs_en, +}; + +static u64 spi_dmamask = DMA_BIT_MASK(32); + +static struct platform_device db1200_spi_dev = { + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1200_spi_platdata, + }, + .name = "au1550-spi", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(au1200_psc0_res), + .resource = au1200_psc0_res, +}; + +static struct resource au1200_psc1_res[] = { + [0] = { + .start = AU1550_PSC1_PHYS_ADDR, + .end = AU1550_PSC1_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_PSC1_INT, + .end = AU1200_PSC1_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1200_DSCR_CMD0_PSC1_TX, + .end = AU1200_DSCR_CMD0_PSC1_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1200_DSCR_CMD0_PSC1_RX, + .end = AU1200_DSCR_CMD0_PSC1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +/* AC97 or I2S device */ +static struct platform_device db1200_audio_dev = { + /* name assigned later based on switch setting */ + .id = 1, /* PSC ID */ + .num_resources = ARRAY_SIZE(au1200_psc1_res), + .resource = au1200_psc1_res, +}; + +/* DB1200 ASoC card device */ +static struct platform_device db1200_sound_dev = { + /* name assigned later based on switch setting */ + .id = 1, /* PSC ID */ +}; + +static struct platform_device db1200_stac_dev = { + .name = "ac97-codec", + .id = 1, /* on PSC1 */ +}; + +static struct platform_device db1200_audiodma_dev = { + .name = "au1xpsc-pcm", + .id = 1, /* PSC ID */ +}; + +static struct platform_device *db1200_devs[] __initdata = { + NULL, /* PSC0, selected by S6.8 */ + &db1200_ide_dev, + &db1200_mmc0_dev, + &au1200_lcd_dev, + &db1200_eth_dev, + &db1200_nand_dev, + &db1200_audiodma_dev, + &db1200_audio_dev, + &db1200_stac_dev, + &db1200_sound_dev, +}; + +static struct platform_device *pb1200_devs[] __initdata = { + &pb1200_mmc1_dev, +}; + +/* Some peripheral base addresses differ on the PB1200 */ +static int __init pb1200_res_fixup(void) +{ + /* CPLD Revs earlier than 4 cause problems */ + if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) { + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "PB1200 must be at CPLD rev 4. Please have\n"); + printk(KERN_ERR "the board updated to latest revisions.\n"); + printk(KERN_ERR "This software will not work reliably\n"); + printk(KERN_ERR "on anything older than CPLD rev 4.!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + return 1; + } + + db1200_nand_res[0].start = PB1200_NAND_PHYS_ADDR; + db1200_nand_res[0].end = PB1200_NAND_PHYS_ADDR + 0xff; + db1200_ide_res[0].start = PB1200_IDE_PHYS_ADDR; + db1200_ide_res[0].end = PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1; + db1200_eth_res[0].start = PB1200_ETH_PHYS_ADDR; + db1200_eth_res[0].end = PB1200_ETH_PHYS_ADDR + 0xff; + return 0; +} + +static int __init db1200_dev_init(void) +{ + unsigned long pfc; + unsigned short sw; + int swapped, bid; + + bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); + if ((bid == BCSR_WHOAMI_PB1200_DDR1) || + (bid == BCSR_WHOAMI_PB1200_DDR2)) { + if (pb1200_res_fixup()) + return -ENODEV; + } + + /* GPIO7 is low-level triggered CPLD cascade */ + irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW); + bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT); + + /* insert/eject pairs: one of both is always screaming. To avoid + * issues they must not be automatically enabled when initially + * requested. + */ + irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN); + + i2c_register_board_info(0, db1200_i2c_devs, + ARRAY_SIZE(db1200_i2c_devs)); + spi_register_board_info(db1200_spi_devs, + ARRAY_SIZE(db1200_i2c_devs)); + + /* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI) + * S6.7 AC97/I2S selector (OFF=AC97 ON=I2S) + * or S12 on the PB1200. + */ + + /* NOTE: GPIO215 controls OTG VBUS supply. In SPI mode however + * this pin is claimed by PSC0 (unused though, but pinmux doesn't + * allow to free it without crippling the SPI interface). + * As a result, in SPI mode, OTG simply won't work (PSC0 uses + * it as an input pin which is pulled high on the boards). + */ + pfc = __raw_readl((void __iomem *)SYS_PINFUNC) & ~SYS_PINFUNC_P0A; + + /* switch off OTG VBUS supply */ + gpio_request(215, "otg-vbus"); + gpio_direction_output(215, 1); + + printk(KERN_INFO "%s device configuration:\n", board_type_str()); + + sw = bcsr_read(BCSR_SWITCHES); + if (sw & BCSR_SWITCHES_DIP_8) { + db1200_devs[0] = &db1200_i2c_dev; + bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); + + pfc |= (2 << 17); /* GPIO2 block owns GPIO215 */ + + printk(KERN_INFO " S6.8 OFF: PSC0 mode I2C\n"); + printk(KERN_INFO " OTG port VBUS supply available!\n"); + } else { + db1200_devs[0] = &db1200_spi_dev; + bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC0MUX); + + pfc |= (1 << 17); /* PSC0 owns GPIO215 */ + + printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n"); + printk(KERN_INFO " OTG port VBUS supply disabled\n"); + } + __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); + wmb(); + + /* Audio: DIP7 selects I2S(0)/AC97(1), but need I2C for I2S! + * so: DIP7=1 || DIP8=0 => AC97, DIP7=0 && DIP8=1 => I2S + */ + sw &= BCSR_SWITCHES_DIP_8 | BCSR_SWITCHES_DIP_7; + if (sw == BCSR_SWITCHES_DIP_8) { + bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC1MUX); + db1200_audio_dev.name = "au1xpsc_i2s"; + db1200_sound_dev.name = "db1200-i2s"; + printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n"); + } else { + bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC1MUX, 0); + db1200_audio_dev.name = "au1xpsc_ac97"; + db1200_sound_dev.name = "db1200-ac97"; + printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n"); + } + + /* Audio PSC clock is supplied externally. (FIXME: platdata!!) */ + __raw_writel(PSC_SEL_CLK_SERCLK, + (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + DB1200_PC0_INT, DB1200_PC0_INSERT_INT, + /*DB1200_PC0_STSCHG_INT*/0, DB1200_PC0_EJECT_INT, 0); + + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, + DB1200_PC1_INT, DB1200_PC1_INSERT_INT, + /*DB1200_PC1_STSCHG_INT*/0, DB1200_PC1_EJECT_INT, 1); + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; + db1x_register_norflash(64 << 20, 2, swapped); + + platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs)); + + /* PB1200 is a DB1200 with a 2nd MMC and Camera connector */ + if ((bid == BCSR_WHOAMI_PB1200_DDR1) || + (bid == BCSR_WHOAMI_PB1200_DDR2)) + platform_add_devices(pb1200_devs, ARRAY_SIZE(pb1200_devs)); + + return 0; +} +device_initcall(db1200_dev_init); |