diff options
Diffstat (limited to 'arch/arm/mach-integrator/pci_v3.c')
| -rw-r--r-- | arch/arm/mach-integrator/pci_v3.c | 604 |
1 files changed, 604 insertions, 0 deletions
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c new file mode 100644 index 00000000000..229a63a525c --- /dev/null +++ b/arch/arm/mach-integrator/pci_v3.c @@ -0,0 +1,604 @@ +/* + * linux/arch/arm/mach-integrator/pci_v3.c + * + * PCI functions for V3 host PCI bridge + * + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/init.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/mach/pci.h> + +#include <asm/hardware/pci_v3.h> + +/* + * The V3 PCI interface chip in Integrator provides several windows from + * local bus memory into the PCI memory areas. Unfortunately, there + * are not really enough windows for our usage, therefore we reuse + * one of the windows for access to PCI configuration space. The + * memory map is as follows: + * + * Local Bus Memory Usage + * + * 40000000 - 4FFFFFFF PCI memory. 256M non-prefetchable + * 50000000 - 5FFFFFFF PCI memory. 256M prefetchable + * 60000000 - 60FFFFFF PCI IO. 16M + * 61000000 - 61FFFFFF PCI Configuration. 16M + * + * There are three V3 windows, each described by a pair of V3 registers. + * These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2. + * Base0 and Base1 can be used for any type of PCI memory access. Base2 + * can be used either for PCI I/O or for I20 accesses. By default, uHAL + * uses this only for PCI IO space. + * + * Normally these spaces are mapped using the following base registers: + * + * Usage Local Bus Memory Base/Map registers used + * + * Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0 + * Mem 50000000 - 5FFFFFFF LB_BASE1/LB_MAP1 + * IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2 + * Cfg 61000000 - 61FFFFFF + * + * This means that I20 and PCI configuration space accesses will fail. + * When PCI configuration accesses are needed (via the uHAL PCI + * configuration space primitives) we must remap the spaces as follows: + * + * Usage Local Bus Memory Base/Map registers used + * + * Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0 + * Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0 + * IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2 + * Cfg 61000000 - 61FFFFFF LB_BASE1/LB_MAP1 + * + * To make this work, the code depends on overlapping windows working. + * The V3 chip translates an address by checking its range within + * each of the BASE/MAP pairs in turn (in ascending register number + * order). It will use the first matching pair. So, for example, + * if the same address is mapped by both LB_BASE0/LB_MAP0 and + * LB_BASE1/LB_MAP1, the V3 will use the translation from + * LB_BASE0/LB_MAP0. + * + * To allow PCI Configuration space access, the code enlarges the + * window mapped by LB_BASE0/LB_MAP0 from 256M to 512M. This occludes + * the windows currently mapped by LB_BASE1/LB_MAP1 so that it can + * be remapped for use by configuration cycles. + * + * At the end of the PCI Configuration space accesses, + * LB_BASE1/LB_MAP1 is reset to map PCI Memory. Finally the window + * mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to + * reveal the now restored LB_BASE1/LB_MAP1 window. + * + * NOTE: We do not set up I2O mapping. I suspect that this is only + * for an intelligent (target) device. Using I2O disables most of + * the mappings into PCI memory. + */ + +// V3 access routines +#define v3_writeb(o,v) __raw_writeb(v, PCI_V3_VADDR + (unsigned int)(o)) +#define v3_readb(o) (__raw_readb(PCI_V3_VADDR + (unsigned int)(o))) + +#define v3_writew(o,v) __raw_writew(v, PCI_V3_VADDR + (unsigned int)(o)) +#define v3_readw(o) (__raw_readw(PCI_V3_VADDR + (unsigned int)(o))) + +#define v3_writel(o,v) __raw_writel(v, PCI_V3_VADDR + (unsigned int)(o)) +#define v3_readl(o) (__raw_readl(PCI_V3_VADDR + (unsigned int)(o))) + +/*============================================================================ + * + * routine: uHALir_PCIMakeConfigAddress() + * + * parameters: bus = which bus + * device = which device + * function = which function + * offset = configuration space register we are interested in + * + * description: this routine will generate a platform dependent config + * address. + * + * calls: none + * + * returns: configuration address to play on the PCI bus + * + * To generate the appropriate PCI configuration cycles in the PCI + * configuration address space, you present the V3 with the following pattern + * (which is very nearly a type 1 (except that the lower two bits are 00 and + * not 01). In order for this mapping to work you need to set up one of + * the local to PCI aperatures to 16Mbytes in length translating to + * PCI configuration space starting at 0x0000.0000. + * + * PCI configuration cycles look like this: + * + * Type 0: + * + * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 + * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0 + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0| + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * + * 31:11 Device select bit. + * 10:8 Function number + * 7:2 Register number + * + * Type 1: + * + * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 + * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0 + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1| + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * + * 31:24 reserved + * 23:16 bus number (8 bits = 128 possible buses) + * 15:11 Device number (5 bits) + * 10:8 function number + * 7:2 register number + * + */ +static DEFINE_SPINLOCK(v3_lock); + +#define PCI_BUS_NONMEM_START 0x00000000 +#define PCI_BUS_NONMEM_SIZE SZ_256M + +#define PCI_BUS_PREMEM_START PCI_BUS_NONMEM_START + PCI_BUS_NONMEM_SIZE +#define PCI_BUS_PREMEM_SIZE SZ_256M + +#if PCI_BUS_NONMEM_START & 0x000fffff +#error PCI_BUS_NONMEM_START must be megabyte aligned +#endif +#if PCI_BUS_PREMEM_START & 0x000fffff +#error PCI_BUS_PREMEM_START must be megabyte aligned +#endif + +#undef V3_LB_BASE_PREFETCH +#define V3_LB_BASE_PREFETCH 0 + +static unsigned long v3_open_config_window(struct pci_bus *bus, + unsigned int devfn, int offset) +{ + unsigned int address, mapaddress, busnr; + + busnr = bus->number; + + /* + * Trap out illegal values + */ + if (offset > 255) + BUG(); + if (busnr > 255) + BUG(); + if (devfn > 255) + BUG(); + + if (busnr == 0) { + int slot = PCI_SLOT(devfn); + + /* + * local bus segment so need a type 0 config cycle + * + * build the PCI configuration "address" with one-hot in + * A31-A11 + * + * mapaddress: + * 3:1 = config cycle (101) + * 0 = PCI A1 & A0 are 0 (0) + */ + address = PCI_FUNC(devfn) << 8; + mapaddress = V3_LB_MAP_TYPE_CONFIG; + + if (slot > 12) + /* + * high order bits are handled by the MAP register + */ + mapaddress |= 1 << (slot - 5); + else + /* + * low order bits handled directly in the address + */ + address |= 1 << (slot + 11); + } else { + /* + * not the local bus segment so need a type 1 config cycle + * + * address: + * 23:16 = bus number + * 15:11 = slot number (7:3 of devfn) + * 10:8 = func number (2:0 of devfn) + * + * mapaddress: + * 3:1 = config cycle (101) + * 0 = PCI A1 & A0 from host bus (1) + */ + mapaddress = V3_LB_MAP_TYPE_CONFIG | V3_LB_MAP_AD_LOW_EN; + address = (busnr << 16) | (devfn << 8); + } + + /* + * Set up base0 to see all 512Mbytes of memory space (not + * prefetchable), this frees up base1 for re-use by + * configuration memory + */ + v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) | + V3_LB_BASE_ADR_SIZE_512MB | V3_LB_BASE_ENABLE); + + /* + * Set up base1/map1 to point into configuration space. + */ + v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_CONFIG_BASE) | + V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE); + v3_writew(V3_LB_MAP1, mapaddress); + + return PCI_CONFIG_VADDR + address + offset; +} + +static void v3_close_config_window(void) +{ + /* + * Reassign base1 for use by prefetchable PCI memory + */ + v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE + SZ_256M) | + V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH | + V3_LB_BASE_ENABLE); + v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(PCI_BUS_PREMEM_START) | + V3_LB_MAP_TYPE_MEM_MULTIPLE); + + /* + * And shrink base0 back to a 256M window (NOTE: MAP0 already correct) + */ + v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) | + V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE); +} + +static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *val) +{ + unsigned long addr; + unsigned long flags; + u32 v; + + spin_lock_irqsave(&v3_lock, flags); + addr = v3_open_config_window(bus, devfn, where); + + switch (size) { + case 1: + v = __raw_readb(addr); + break; + + case 2: + v = __raw_readw(addr); + break; + + default: + v = __raw_readl(addr); + break; + } + + v3_close_config_window(); + spin_unlock_irqrestore(&v3_lock, flags); + + *val = v; + return PCIBIOS_SUCCESSFUL; +} + +static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 val) +{ + unsigned long addr; + unsigned long flags; + + spin_lock_irqsave(&v3_lock, flags); + addr = v3_open_config_window(bus, devfn, where); + + switch (size) { + case 1: + __raw_writeb((u8)val, addr); + __raw_readb(addr); + break; + + case 2: + __raw_writew((u16)val, addr); + __raw_readw(addr); + break; + + case 4: + __raw_writel(val, addr); + __raw_readl(addr); + break; + } + + v3_close_config_window(); + spin_unlock_irqrestore(&v3_lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops pci_v3_ops = { + .read = v3_read_config, + .write = v3_write_config, +}; + +static struct resource non_mem = { + .name = "PCI non-prefetchable", + .start = PHYS_PCI_MEM_BASE + PCI_BUS_NONMEM_START, + .end = PHYS_PCI_MEM_BASE + PCI_BUS_NONMEM_START + PCI_BUS_NONMEM_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct resource pre_mem = { + .name = "PCI prefetchable", + .start = PHYS_PCI_MEM_BASE + PCI_BUS_PREMEM_START, + .end = PHYS_PCI_MEM_BASE + PCI_BUS_PREMEM_START + PCI_BUS_PREMEM_SIZE - 1, + .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH, +}; + +static int __init pci_v3_setup_resources(struct resource **resource) +{ + if (request_resource(&iomem_resource, &non_mem)) { + printk(KERN_ERR "PCI: unable to allocate non-prefetchable " + "memory region\n"); + return -EBUSY; + } + if (request_resource(&iomem_resource, &pre_mem)) { + release_resource(&non_mem); + printk(KERN_ERR "PCI: unable to allocate prefetchable " + "memory region\n"); + return -EBUSY; + } + + /* + * bus->resource[0] is the IO resource for this bus + * bus->resource[1] is the mem resource for this bus + * bus->resource[2] is the prefetch mem resource for this bus + */ + resource[0] = &ioport_resource; + resource[1] = &non_mem; + resource[2] = &pre_mem; + + return 1; +} + +/* + * These don't seem to be implemented on the Integrator I have, which + * means I can't get additional information on the reason for the pm2fb + * problems. I suppose I'll just have to mind-meld with the machine. ;) + */ +#define SC_PCI (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_PCIENABLE_OFFSET) +#define SC_LBFADDR (IO_ADDRESS(INTEGRATOR_SC_BASE) + 0x20) +#define SC_LBFCODE (IO_ADDRESS(INTEGRATOR_SC_BASE) + 0x24) + +static int +v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) +{ + unsigned long pc = instruction_pointer(regs); + unsigned long instr = *(unsigned long *)pc; +#if 0 + char buf[128]; + + sprintf(buf, "V3 fault: addr 0x%08lx, FSR 0x%03x, PC 0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n", + addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255, + v3_readb(V3_LB_ISTAT)); + printk(KERN_DEBUG "%s", buf); + printascii(buf); +#endif + + v3_writeb(V3_LB_ISTAT, 0); + __raw_writel(3, SC_PCI); + + /* + * If the instruction being executed was a read, + * make it look like it read all-ones. + */ + if ((instr & 0x0c100000) == 0x04100000) { + int reg = (instr >> 12) & 15; + unsigned long val; + + if (instr & 0x00400000) + val = 255; + else + val = -1; + + regs->uregs[reg] = val; + regs->ARM_pc += 4; + return 0; + } + + if ((instr & 0x0e100090) == 0x00100090) { + int reg = (instr >> 12) & 15; + + regs->uregs[reg] = -1; + regs->ARM_pc += 4; + return 0; + } + + return 1; +} + +static irqreturn_t v3_irq(int irq, void *devid, struct pt_regs *regs) +{ +#ifdef CONFIG_DEBUG_LL + unsigned long pc = instruction_pointer(regs); + unsigned long instr = *(unsigned long *)pc; + char buf[128]; + + sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n", irq, + pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255, + v3_readb(V3_LB_ISTAT)); + printascii(buf); +#endif + + v3_writew(V3_PCI_STAT, 0xf000); + v3_writeb(V3_LB_ISTAT, 0); + __raw_writel(3, SC_PCI); + +#ifdef CONFIG_DEBUG_LL + /* + * If the instruction being executed was a read, + * make it look like it read all-ones. + */ + if ((instr & 0x0c100000) == 0x04100000) { + int reg = (instr >> 16) & 15; + sprintf(buf, " reg%d = %08lx\n", reg, regs->uregs[reg]); + printascii(buf); + } +#endif + return IRQ_HANDLED; +} + +int __init pci_v3_setup(int nr, struct pci_sys_data *sys) +{ + int ret = 0; + + if (nr == 0) { + sys->mem_offset = PHYS_PCI_MEM_BASE; + ret = pci_v3_setup_resources(sys->resource); + } + + return ret; +} + +struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *sys) +{ + return pci_scan_bus(sys->busnr, &pci_v3_ops, sys); +} + +/* + * V3_LB_BASE? - local bus address + * V3_LB_MAP? - pci bus address + */ +void __init pci_v3_preinit(void) +{ + unsigned long flags; + unsigned int temp; + int ret; + + /* + * Hook in our fault handler for PCI errors + */ + hook_fault_code(4, v3_pci_fault, SIGBUS, "external abort on linefetch"); + hook_fault_code(6, v3_pci_fault, SIGBUS, "external abort on linefetch"); + hook_fault_code(8, v3_pci_fault, SIGBUS, "external abort on non-linefetch"); + hook_fault_code(10, v3_pci_fault, SIGBUS, "external abort on non-linefetch"); + + spin_lock_irqsave(&v3_lock, flags); + + /* + * Unlock V3 registers, but only if they were previously locked. + */ + if (v3_readw(V3_SYSTEM) & V3_SYSTEM_M_LOCK) + v3_writew(V3_SYSTEM, 0xa05f); + + /* + * Setup window 0 - PCI non-prefetchable memory + * Local: 0x40000000 Bus: 0x00000000 Size: 256MB + */ + v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) | + V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE); + v3_writew(V3_LB_MAP0, v3_addr_to_lb_map(PCI_BUS_NONMEM_START) | + V3_LB_MAP_TYPE_MEM); + + /* + * Setup window 1 - PCI prefetchable memory + * Local: 0x50000000 Bus: 0x10000000 Size: 256MB + */ + v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE + SZ_256M) | + V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH | + V3_LB_BASE_ENABLE); + v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(PCI_BUS_PREMEM_START) | + V3_LB_MAP_TYPE_MEM_MULTIPLE); + + /* + * Setup window 2 - PCI IO + */ + v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(PHYS_PCI_IO_BASE) | + V3_LB_BASE_ENABLE); + v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0)); + + /* + * Disable PCI to host IO cycles + */ + temp = v3_readw(V3_PCI_CFG) & ~V3_PCI_CFG_M_I2O_EN; + temp |= V3_PCI_CFG_M_IO_REG_DIS | V3_PCI_CFG_M_IO_DIS; + v3_writew(V3_PCI_CFG, temp); + + printk(KERN_DEBUG "FIFO_CFG: %04x FIFO_PRIO: %04x\n", + v3_readw(V3_FIFO_CFG), v3_readw(V3_FIFO_PRIORITY)); + + /* + * Set the V3 FIFO such that writes have higher priority than + * reads, and local bus write causes local bus read fifo flush. + * Same for PCI. + */ + v3_writew(V3_FIFO_PRIORITY, 0x0a0a); + + /* + * Re-lock the system register. + */ + temp = v3_readw(V3_SYSTEM) | V3_SYSTEM_M_LOCK; + v3_writew(V3_SYSTEM, temp); + + /* + * Clear any error conditions, and enable write errors. + */ + v3_writeb(V3_LB_ISTAT, 0); + v3_writew(V3_LB_CFG, v3_readw(V3_LB_CFG) | (1 << 10)); + v3_writeb(V3_LB_IMASK, 0x28); + __raw_writel(3, SC_PCI); + + /* + * Grab the PCI error interrupt. + */ + ret = request_irq(IRQ_AP_V3INT, v3_irq, 0, "V3", NULL); + if (ret) + printk(KERN_ERR "PCI: unable to grab PCI error " + "interrupt: %d\n", ret); + + spin_unlock_irqrestore(&v3_lock, flags); +} + +void __init pci_v3_postinit(void) +{ + unsigned int pci_cmd; + + pci_cmd = PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; + + v3_writew(V3_PCI_CMD, pci_cmd); + + v3_writeb(V3_LB_ISTAT, ~0x40); + v3_writeb(V3_LB_IMASK, 0x68); + +#if 0 + ret = request_irq(IRQ_AP_LBUSTIMEOUT, lb_timeout, 0, "bus timeout", NULL); + if (ret) + printk(KERN_ERR "PCI: unable to grab local bus timeout " + "interrupt: %d\n", ret); +#endif +} |