summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-omap2/Makefile2
-rw-r--r--arch/arm/mach-omap2/board-3430sdp.c65
-rw-r--r--arch/arm/mach-omap2/board-cm-t35.c58
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c56
-rw-r--r--arch/arm/mach-omap2/board-ldp.c57
-rw-r--r--arch/arm/mach-omap2/board-omap3evm.c51
-rw-r--r--arch/arm/mach-omap2/board-omap3pandora.c49
-rw-r--r--arch/arm/mach-omap2/board-omap3stalker.c49
-rw-r--r--arch/arm/mach-omap2/board-omap3touchbook.c36
-rw-r--r--arch/arm/mach-omap2/board-overo.c46
-rw-r--r--arch/arm/mach-omap2/common-board-devices.c85
-rw-r--r--arch/arm/mach-omap2/common-board-devices.h18
12 files changed, 128 insertions, 444 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index a45cd640968..a0c2caefc74 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -270,3 +270,5 @@ obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o
disp-$(CONFIG_OMAP2_DSS) := display.o
obj-y += $(disp-m) $(disp-y)
+
+obj-y += common-board-devices.o
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 9afd087cc29..3726465d34e 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -19,7 +19,6 @@
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
#include <linux/io.h>
@@ -48,6 +47,7 @@
#include "hsmmc.h"
#include "pm.h"
#include "control.h"
+#include "common-board-devices.h"
#define CONFIG_DISABLE_HFCLK 1
@@ -123,58 +123,6 @@ static struct twl4030_keypad_data sdp3430_kp_data = {
.rep = 1,
};
-static int ts_gpio; /* Needed for ads7846_get_pendown_state */
-
-/**
- * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
- *
- * @return - void. If request gpio fails then Flag KERN_ERR.
- */
-static void ads7846_dev_init(void)
-{
- if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) {
- printk(KERN_ERR "can't get ads746 pen down GPIO\n");
- return;
- }
-
- gpio_direction_input(ts_gpio);
- gpio_set_debounce(ts_gpio, 310);
-}
-
-static int ads7846_get_pendown_state(void)
-{
- return !gpio_get_value(ts_gpio);
-}
-
-static struct ads7846_platform_data tsc2046_config __initdata = {
- .get_pendown_state = ads7846_get_pendown_state,
- .keep_vref_on = 1,
- .wakeup = true,
-};
-
-
-static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
- .turbo_mode = 0,
- .single_channel = 1, /* 0: slave, 1: master */
-};
-
-static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
- [0] = {
- /*
- * TSC2046 operates at a max freqency of 2MHz, so
- * operate slightly below at 1.5MHz
- */
- .modalias = "ads7846",
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 1500000,
- .controller_data = &tsc2046_mcspi_config,
- .irq = 0,
- .platform_data = &tsc2046_config,
- },
-};
-
-
#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8
#define SDP3430_LCD_PANEL_ENABLE_GPIO 5
@@ -880,6 +828,8 @@ static struct omap_musb_board_data musb_board_data = {
static void __init omap_3430sdp_init(void)
{
+ int gpio_pendown;
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_board_config = sdp3430_config;
omap_board_config_size = ARRAY_SIZE(sdp3430_config);
@@ -887,13 +837,10 @@ static void __init omap_3430sdp_init(void)
omap3430_i2c_init();
omap_display_init(&sdp3430_dss_data);
if (omap_rev() > OMAP3430_REV_ES1_0)
- ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
+ gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2;
else
- ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1;
- sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
- spi_register_board_info(sdp3430_spi_board_info,
- ARRAY_SIZE(sdp3430_spi_board_info));
- ads7846_dev_init();
+ gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
+ omap_ads7846_init(1, gpio_pendown, 310, NULL);
board_serial_init();
usb_musb_init(&musb_board_data);
board_smc91x_init();
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 7c70f56d628..4af5cf9ef43 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -54,6 +54,7 @@
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
+#include "common-board-devices.h"
#define CM_T35_GPIO_PENDOWN 57
@@ -177,61 +178,6 @@ static void __init cm_t35_init_nand(void)
static inline void cm_t35_init_nand(void) {}
#endif
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
- defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-#include <linux/spi/ads7846.h>
-
-static struct omap2_mcspi_device_config ads7846_mcspi_config = {
- .turbo_mode = 0,
- .single_channel = 1, /* 0: slave, 1: master */
-};
-
-static int ads7846_get_pendown_state(void)
-{
- return !gpio_get_value(CM_T35_GPIO_PENDOWN);
-}
-
-static struct ads7846_platform_data ads7846_config = {
- .x_max = 0x0fff,
- .y_max = 0x0fff,
- .x_plate_ohms = 180,
- .pressure_max = 255,
- .debounce_max = 10,
- .debounce_tol = 3,
- .debounce_rep = 1,
- .get_pendown_state = ads7846_get_pendown_state,
- .keep_vref_on = 1,
-};
-
-static struct spi_board_info cm_t35_spi_board_info[] __initdata = {
- {
- .modalias = "ads7846",
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 1500000,
- .controller_data = &ads7846_mcspi_config,
- .irq = OMAP_GPIO_IRQ(CM_T35_GPIO_PENDOWN),
- .platform_data = &ads7846_config,
- },
-};
-
-static void __init cm_t35_init_ads7846(void)
-{
- if ((gpio_request(CM_T35_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) &&
- (gpio_direction_input(CM_T35_GPIO_PENDOWN) == 0)) {
- gpio_export(CM_T35_GPIO_PENDOWN, 0);
- } else {
- pr_err("CM-T35: could not obtain gpio for ADS7846_PENDOWN\n");
- return;
- }
-
- spi_register_board_info(cm_t35_spi_board_info,
- ARRAY_SIZE(cm_t35_spi_board_info));
-}
-#else
-static inline void cm_t35_init_ads7846(void) {}
-#endif
-
#define CM_T35_LCD_EN_GPIO 157
#define CM_T35_LCD_BL_GPIO 58
#define CM_T35_DVI_EN_GPIO 54
@@ -734,7 +680,7 @@ static void __init cm_t35_init(void)
omap_serial_init();
cm_t35_init_i2c();
cm_t35_init_nand();
- cm_t35_init_ads7846();
+ omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
cm_t35_init_ethernet();
cm_t35_init_led();
cm_t35_init_display();
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 65f9fde2c56..9f8338d15a2 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -51,7 +51,6 @@
#include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
#include <linux/dm9000.h>
#include <linux/interrupt.h>
@@ -60,6 +59,7 @@
#include "mux.h"
#include "hsmmc.h"
#include "timer-gp.h"
+#include "common-board-devices.h"
#define NAND_BLOCK_SIZE SZ_128K
@@ -463,56 +463,6 @@ static void __init devkit8000_init_irq(void)
#endif
}
-static void __init devkit8000_ads7846_init(void)
-{
- int gpio = OMAP3_DEVKIT_TS_GPIO;
- int ret;
-
- ret = gpio_request(gpio, "ads7846_pen_down");
- if (ret < 0) {
- printk(KERN_ERR "Failed to request GPIO %d for "
- "ads7846 pen down IRQ\n", gpio);
- return;
- }
-
- gpio_direction_input(gpio);
-}
-
-static int ads7846_get_pendown_state(void)
-{
- return !gpio_get_value(OMAP3_DEVKIT_TS_GPIO);
-}
-
-static struct ads7846_platform_data ads7846_config = {
- .x_max = 0x0fff,
- .y_max = 0x0fff,
- .x_plate_ohms = 180,
- .pressure_max = 255,
- .debounce_max = 10,
- .debounce_tol = 5,
- .debounce_rep = 1,
- .get_pendown_state = ads7846_get_pendown_state,
- .keep_vref_on = 1,
- .settle_delay_usecs = 150,
-};
-
-static struct omap2_mcspi_device_config ads7846_mcspi_config = {
- .turbo_mode = 0,
- .single_channel = 1, /* 0: slave, 1: master */
-};
-
-static struct spi_board_info devkit8000_spi_board_info[] __initdata = {
- {
- .modalias = "ads7846",
- .bus_num = 2,
- .chip_select = 0,
- .max_speed_hz = 1500000,
- .controller_data = &ads7846_mcspi_config,
- .irq = OMAP_GPIO_IRQ(OMAP3_DEVKIT_TS_GPIO),
- .platform_data = &ads7846_config,
- }
-};
-
#define OMAP_DM9000_BASE 0x2c000000
static struct resource omap_dm9000_resources[] = {
@@ -795,10 +745,8 @@ static void __init devkit8000_init(void)
ARRAY_SIZE(devkit8000_devices));
omap_display_init(&devkit8000_dss_data);
- spi_register_board_info(devkit8000_spi_board_info,
- ARRAY_SIZE(devkit8000_spi_board_info));
- devkit8000_ads7846_init();
+ omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL);
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ea9f049f996..155b423784c 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -22,7 +22,6 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
#include <linux/io.h>
@@ -49,6 +48,7 @@
#include "mux.h"
#include "hsmmc.h"
#include "control.h"
+#include "common-board-devices.h"
#define LDP_SMSC911X_CS 1
#define LDP_SMSC911X_GPIO 152
@@ -168,55 +168,6 @@ static struct platform_device ldp_gpio_keys_device = {
},
};
-static int ts_gpio;
-
-/**
- * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
- *
- * @return - void. If request gpio fails then Flag KERN_ERR.
- */
-static void ads7846_dev_init(void)
-{
- if (gpio_request(ts_gpio, "ads7846 irq") < 0) {
- printk(KERN_ERR "can't get ads746 pen down GPIO\n");
- return;
- }
-
- gpio_direction_input(ts_gpio);
- gpio_set_debounce(ts_gpio, 310);
-}
-
-static int ads7846_get_pendown_state(void)
-{
- return !gpio_get_value(ts_gpio);
-}
-
-static struct ads7846_platform_data tsc2046_config __initdata = {
- .get_pendown_state = ads7846_get_pendown_state,
- .keep_vref_on = 1,
-};
-
-static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
- .turbo_mode = 0,
- .single_channel = 1, /* 0: slave, 1: master */
-};
-
-static struct spi_board_info ldp_spi_board_info[] __initdata = {
- [0] = {
- /*
- * TSC2046 operates at a max freqency of 2MHz, so
- * operate slightly below at 1.5MHz
- */
- .modalias = "ads7846",
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 1500000,
- .controller_data = &tsc2046_mcspi_config,
- .irq = 0,
- .platform_data = &tsc2046_config,
- },
-};
-
static struct omap_smsc911x_platform_data smsc911x_cfg = {
.cs = LDP_SMSC911X_CS,
.gpio_irq = LDP_SMSC911X_GPIO,
@@ -399,11 +350,7 @@ static void __init omap_ldp_init(void)
ldp_init_smsc911x();
omap_i2c_init();
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
- ts_gpio = 54;
- ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
- spi_register_board_info(ldp_spi_board_info,
- ARRAY_SIZE(ldp_spi_board_info));
- ads7846_dev_init();
+ omap_ads7846_init(1, 54, 310, NULL);
omap_serial_init();
usb_musb_init(&musb_board_data);
board_nand_init(ldp_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 3fc85c6fc55..376ea87dce6 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -50,6 +50,7 @@
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
+#include "common-board-devices.h"
#define OMAP3_EVM_TS_GPIO 175
#define OMAP3_EVM_EHCI_VBUS 22
@@ -630,51 +631,6 @@ static int __init omap3_evm_i2c_init(void)
return 0;
}
-static void ads7846_dev_init(void)
-{
- if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
- printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
-
- gpio_direction_input(OMAP3_EVM_TS_GPIO);
- gpio_set_debounce(OMAP3_EVM_TS_GPIO, 310);
-}
-
-static int ads7846_get_pendown_state(void)
-{
- return !gpio_get_value(OMAP3_EVM_TS_GPIO);
-}
-
-static struct ads7846_platform_data ads7846_config = {
- .x_max = 0x0fff,
- .y_max = 0x0fff,
- .x_plate_ohms = 180,
- .pressure_max = 255,
- .debounce_max = 10,
- .debounce_tol = 3,
- .debounce_rep = 1,
- .get_pendown_state = ads7846_get_pendown_state,
- .keep_vref_on = 1,
- .settle_delay_usecs = 150,
- .wakeup = true,
-};
-
-static struct omap2_mcspi_device_config ads7846_mcspi_config = {
- .turbo_mode = 0,
- .single_channel = 1, /* 0: slave, 1: master */
-};
-
-static struct spi_board_info omap3evm_spi_board_info[] = {
- [0] = {
- .modalias = "ads7846",
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 1500000,
- .controller_data = &ads7846_mcspi_config,
- .irq = OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO),
- .platform_data = &ads7846_config,
- },
-};
-
static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
};
@@ -792,9 +748,6 @@ static void __init omap3_evm_init(void)
omap_display_init(&omap3_evm_dss_data);
- spi_register_board_info(omap3evm_spi_board_info,
- ARRAY_SIZE(omap3evm_spi_board_info));
-
omap_serial_init();
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
@@ -827,7 +780,7 @@ static void __init omap3_evm_init(void)
}
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
- ads7846_dev_init();
+ omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
omap3evm_init_smsc911x();
omap3_evm_display_init();
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 07dba888f45..517701aae3c 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -22,7 +22,6 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
#include <linux/wl12xx.h>
@@ -52,6 +51,7 @@
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
+#include "common-board-devices.h"
#define PANDORA_WIFI_IRQ_GPIO 21
#define PANDORA_WIFI_NRESET_GPIO 23
@@ -570,53 +570,8 @@ static int __init omap3pandora_i2c_init(void)
return 0;
}
-static void __init omap3pandora_ads7846_init(void)
-{
- int gpio = OMAP3_PANDORA_TS_GPIO;
- int ret;
-
- ret = gpio_request(gpio, "ads7846_pen_down");
- if (ret < 0) {
- printk(KERN_ERR "Failed to request GPIO %d for "
- "ads7846 pen down IRQ\n", gpio);
- return;
- }
-
- gpio_direction_input(gpio);
-}
-
-static int ads7846_get_pendown_state(void)
-{
- return !gpio_get_value(OMAP3_PANDORA_TS_GPIO);
-}
-
-static struct ads7846_platform_data ads7846_config = {
- .x_max = 0x0fff,
- .y_max = 0x0fff,
- .x_plate_ohms = 180,
- .pressure_max = 255,
- .debounce_max = 10,
- .debounce_tol = 3,
- .debounce_rep = 1,
- .get_pendown_state = ads7846_get_pendown_state,
- .keep_vref_on = 1,
-};
-
-static struct omap2_mcspi_device_config ads7846_mcspi_config = {
- .turbo_mode = 0,
- .single_channel = 1, /* 0: slave, 1: master */
-};
-
static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
{
- .modalias = "ads7846",
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 1500000,
- .controller_data = &ads7846_mcspi_config,
- .irq = OMAP_GPIO_IRQ(OMAP3_PANDORA_TS_GPIO),
- .platform_data = &ads7846_config,
- }, {
.modalias = "tpo_td043mtea1_panel_spi",
.bus_num = 1,
.chip_select = 1,
@@ -705,7 +660,7 @@ static void __init omap3pandora_init(void)
omap_serial_init();
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
- omap3pandora_ads7846_init();
+ omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
usbhs_init(&usbhs_bdata);
usb_musb_init(&musb_board_data);
gpmc_nand_init(&pandora_nand_data);
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 848016c6a24..671ceb0c7a6 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -45,7 +45,6 @@
#include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
#include <linux/interrupt.h>
#include <linux/smsc911x.h>
#include <linux/i2c/at24.h>
@@ -54,6 +53,7 @@
#include "mux.h"
#include "hsmmc.h"
#include "timer-gp.h"
+#include "common-board-devices.h"
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <plat/gpmc-smsc911x.h>
@@ -498,49 +498,6 @@ static int __init omap3_stalker_i2c_init(void)
}
#define OMAP3_STALKER_TS_GPIO 175
-static void ads7846_dev_init(void)
-{
- if (gpio_request(OMAP3_STALKER_TS_GPIO, "ADS7846 pendown") < 0)
- printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
-
- gpio_direction_input(OMAP3_STALKER_TS_GPIO);
- gpio_set_debounce(OMAP3_STALKER_TS_GPIO, 310);
-}
-
-static int ads7846_get_pendown_state(void)
-{
- return !gpio_get_value(OMAP3_STALKER_TS_GPIO);
-}
-
-static struct ads7846_platform_data ads7846_config = {
- .x_max = 0x0fff,
- .y_max = 0x0fff,
- .x_plate_ohms = 180,
- .pressure_max = 255,
- .debounce_max = 10,
- .debounce_tol = 3,
- .debounce_rep = 1,
- .get_pendown_state = ads7846_get_pendown_state,
- .keep_vref_on = 1,
- .settle_delay_usecs = 150,
-};
-
-static struct omap2_mcspi_device_config ads7846_mcspi_config = {
- .turbo_mode = 0,
- .single_channel = 1, /* 0: slave, 1: master */
-};
-
-static struct spi_board_info omap3stalker_spi_board_info[] = {
- [0] = {
- .modalias = "ads7846",
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 1500000,
- .controller_data = &ads7846_mcspi_config,
- .irq = OMAP_GPIO_IRQ(OMAP3_STALKER_TS_GPIO),
- .platform_data = &ads7846_config,
- },
-};
static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
};
@@ -602,13 +559,11 @@ static void __init omap3_stalker_init(void)
ARRAY_SIZE(omap3_stalker_devices));
omap_display_init(&omap3_stalker_dss_data);
- spi_register_board_info(omap3stalker_spi_board_info,
- ARRAY_SIZE(omap3stalker_spi_board_info));
omap_serial_init();
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
- ads7846_dev_init();
+ omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
omap_mux_init_gpio(21, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 127cb1752bd..15f9d7ddc23 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -52,6 +52,7 @@
#include "mux.h"
#include "hsmmc.h"
#include "timer-gp.h"
+#include "common-board-devices.h"
#include <asm/setup.h>
@@ -301,19 +302,7 @@ static int __init omap3_touchbook_i2c_init(void)
return 0;
}
-static void __init omap3_ads7846_init(void)
-{
- if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) {
- printk(KERN_ERR "Failed to request GPIO %d for "
- "ads7846 pen down IRQ\n", OMAP3_TS_GPIO);
- return;
- }
-
- gpio_direction_input(OMAP3_TS_GPIO);
- gpio_set_debounce(OMAP3_TS_GPIO, 310);
-}
-
-static struct ads7846_platform_data ads7846_config = {
+static struct ads7846_platform_data ads7846_pdata = {
.x_min = 100,
.y_min = 265,
.x_max = 3950,
@@ -327,23 +316,6 @@ static struct ads7846_platform_data ads7846_config = {
.keep_vref_on = 1,
};
-static struct omap2_mcspi_device_config ads7846_mcspi_config = {
- .turbo_mode = 0,
- .single_channel = 1, /* 0: slave, 1: master */
-};
-
-static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = {
- {
- .modalias = "ads7846",
- .bus_num = 4,
- .chip_select = 0,
- .max_speed_hz = 1500000,
- .controller_data = &ads7846_mcspi_config,
- .irq = OMAP_GPIO_IRQ(OMAP3_TS_GPIO),
- .platform_data = &ads7846_config,
- }
-};
-
static struct gpio_led gpio_leds[] = {
{
.name = "touchbook::usr0",
@@ -526,9 +498,7 @@ static void __init omap3_touchbook_init(void)
gpio_direction_output(176, true);
/* Touchscreen and accelerometer */
- spi_register_board_info(omap3_ads7846_spi_board_info,
- ARRAY_SIZE(omap3_ads7846_spi_board_info));
- omap3_ads7846_init();
+ omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
omap3touchbook_flash_init();
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 165e1faea1b..4a02f8434f5 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -56,6 +56,7 @@
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
+#include "common-board-devices.h"
#define OVERO_GPIO_BT_XGATE 15
#define OVERO_GPIO_W2W_NRESET 16
@@ -74,30 +75,6 @@
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-#include <linux/spi/ads7846.h>
-
-static struct omap2_mcspi_device_config ads7846_mcspi_config = {
- .turbo_mode = 0,
- .single_channel = 1, /* 0: slave, 1: master */
-};
-
-static int ads7846_get_pendown_state(void)
-{
- return !gpio_get_value(OVERO_GPIO_PENDOWN);
-}
-
-static struct ads7846_platform_data ads7846_config = {
- .x_max = 0x0fff,
- .y_max = 0x0fff,
- .x_plate_ohms = 180,
- .pressure_max = 255,
- .debounce_max = 10,
- .debounce_tol = 3,
- .debounce_rep = 1,
- .get_pendown_state = ads7846_get_pendown_state,
- .keep_vref_on = 1,
-};
-
/* fixed regulator for ads7846 */
static struct regulator_consumer_supply ads7846_supply =
REGULATOR_SUPPLY("vcc", "spi1.0");
@@ -128,14 +105,7 @@ static struct platform_device vads7846_device = {
static void __init overo_ads7846_init(void)
{
- if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) &&
- (gpio_direction_input(OVERO_GPIO_PENDOWN) == 0)) {
- gpio_export(OVERO_GPIO_PENDOWN, 0);
- } else {
- printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n");
- return;
- }
-
+ omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL);
platform_device_register(&vads7846_device);
}
@@ -589,18 +559,6 @@ static int __init overo_i2c_init(void)
}
static struct spi_board_info overo_spi_board_info[] __initdata = {
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
- defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
- {
- .modalias = "ads7846",
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 1500000,
- .controller_data = &ads7846_mcspi_config,
- .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
- .platform_data = &ads7846_config,
- },
-#endif
#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
{
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
new file mode 100644
index 00000000000..fad41ec6230
--- /dev/null
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -0,0 +1,85 @@
+/*
+ * common-board-devices.c
+ *
+ * Copyright (C) 2011 CompuLab, Ltd.
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <plat/mcspi.h>
+
+#include "common-board-devices.h"
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+static struct ads7846_platform_data ads7846_config = {
+ .x_max = 0x0fff,
+ .y_max = 0x0fff,
+ .x_plate_ohms = 180,
+ .pressure_max = 255,
+ .debounce_max = 10,
+ .debounce_tol = 3,
+ .debounce_rep = 1,
+ .gpio_pendown = -EINVAL,
+ .keep_vref_on = 1,
+};
+
+static struct spi_board_info ads7846_spi_board_info __initdata = {
+ .modalias = "ads7846",
+ .bus_num = -EINVAL,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &ads7846_mcspi_config,
+ .irq = -EINVAL,
+ .platform_data = &ads7846_config,
+};
+
+void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
+ struct ads7846_platform_data *board_pdata)
+{
+ struct spi_board_info *spi_bi = &ads7846_spi_board_info;
+ int err;
+
+ err = gpio_request(gpio_pendown, "TS PenDown");
+ if (err) {
+ pr_err("Could not obtain gpio for TS PenDown: %d\n", err);
+ return;
+ }
+
+ gpio_direction_input(gpio_pendown);
+ gpio_export(gpio_pendown, 0);
+
+ if (gpio_debounce)
+ gpio_set_debounce(gpio_pendown, gpio_debounce);
+
+ ads7846_config.gpio_pendown = gpio_pendown;
+
+ spi_bi->bus_num = bus_num;
+ spi_bi->irq = OMAP_GPIO_IRQ(gpio_pendown);
+
+ if (board_pdata)
+ spi_bi->platform_data = board_pdata;
+
+ spi_register_board_info(&ads7846_spi_board_info, 1);
+}
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
new file mode 100644
index 00000000000..75f9248d0bf
--- /dev/null
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -0,0 +1,18 @@
+#ifndef __OMAP_COMMON_BOARD_DEVICES__
+#define __OMAP_COMMON_BOARD_DEVICES__
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+struct ads7846_platform_data;
+
+void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
+ struct ads7846_platform_data *board_pdata);
+#else
+static inline void omap_ads7846_init(int bus_num,
+ int gpio_pendown, int gpio_debounce,
+ struct ads7846_platform_data *board_data)
+{
+}
+#endif
+
+#endif /* __OMAP_COMMON_BOARD_DEVICES__ */
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-11-04 08:44:29 +0000