diff options
| -rw-r--r-- | Documentation/devicetree/bindings/gpio/gpio_nvidia.txt | 12 | ||||
| -rw-r--r-- | arch/arm/boot/dts/tegra20.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/tegra30.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm/mach-tegra/include/mach/gpio-tegra.h | 2 | ||||
| -rw-r--r-- | drivers/gpio/gpio-tegra.c | 25 |
5 files changed, 34 insertions, 9 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt index 50b363c5b88..d114e1997d3 100644 --- a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt +++ b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt @@ -8,6 +8,16 @@ Required properties: second cell is used to specify optional parameters: - bit 0 specifies polarity (0 for normal, 1 for inverted) - gpio-controller : Marks the device node as a GPIO controller. +- #interrupt-cells : Should be 2. + The first cell is the GPIO number. + The second cell is used to specify flags: + bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + Valid combinations are 1, 2, 3, 4, 8. +- interrupt-controller : Marks the device node as an interrupt controller. Example: @@ -23,4 +33,6 @@ gpio: gpio@6000d000 { 0 89 0x04 >; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 3195ad5562d..ec1f0101c79 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -101,6 +101,8 @@ 0 89 0x04 >; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; }; pinmux: pinmux@70000000 { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index fd25e8e9ffd..ac4b75cb26c 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -107,6 +107,8 @@ 0 125 0x04 >; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; }; serial@70006000 { diff --git a/arch/arm/mach-tegra/include/mach/gpio-tegra.h b/arch/arm/mach-tegra/include/mach/gpio-tegra.h index 87d37fdf508..6140820555e 100644 --- a/arch/arm/mach-tegra/include/mach/gpio-tegra.h +++ b/arch/arm/mach-tegra/include/mach/gpio-tegra.h @@ -25,8 +25,6 @@ #define TEGRA_NR_GPIOS INT_GPIO_NR -#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio)) - struct tegra_gpio_table { int gpio; /* GPIO number */ bool enable; /* Enable for GPIO at init? */ diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index bdc29379159..bc923c7acce 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -25,6 +25,7 @@ #include <linux/of.h> #include <linux/platform_device.h> #include <linux/module.h> +#include <linux/irqdomain.h> #include <asm/mach/irq.h> @@ -74,7 +75,7 @@ struct tegra_gpio_bank { #endif }; - +static struct irq_domain irq_domain; static void __iomem *regs; static struct tegra_gpio_bank tegra_gpio_banks[7]; @@ -139,7 +140,7 @@ static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset, static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned offset) { - return TEGRA_GPIO_TO_IRQ(offset); + return irq_domain_to_irq(&irq_domain, offset); } static struct gpio_chip tegra_gpio_chip = { @@ -155,28 +156,28 @@ static struct gpio_chip tegra_gpio_chip = { static void tegra_gpio_irq_ack(struct irq_data *d) { - int gpio = d->irq - INT_GPIO_BASE; + int gpio = d->hwirq; tegra_gpio_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio)); } static void tegra_gpio_irq_mask(struct irq_data *d) { - int gpio = d->irq - INT_GPIO_BASE; + int gpio = d->hwirq; tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 0); } static void tegra_gpio_irq_unmask(struct irq_data *d) { - int gpio = d->irq - INT_GPIO_BASE; + int gpio = d->hwirq; tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 1); } static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type) { - int gpio = d->irq - INT_GPIO_BASE; + int gpio = d->hwirq; struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); int port = GPIO_PORT(gpio); int lvl_type; @@ -343,6 +344,16 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev) int i; int j; + irq_domain.irq_base = irq_alloc_descs(-1, 0, TEGRA_NR_GPIOS, 0); + if (irq_domain.irq_base < 0) { + dev_err(&pdev->dev, "Couldn't allocate IRQ numbers\n"); + return -ENODEV; + } + irq_domain.nr_irq = TEGRA_NR_GPIOS; + irq_domain.ops = &irq_domain_simple_ops; + irq_domain.of_node = pdev->dev.of_node; + irq_domain_add(&irq_domain); + for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) { res = platform_get_resource(pdev, IORESOURCE_IRQ, i); if (!res) { @@ -381,7 +392,7 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev) gpiochip_add(&tegra_gpio_chip); for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) { - int irq = TEGRA_GPIO_TO_IRQ(gpio); + int irq = irq_domain_to_irq(&irq_domain, gpio); /* No validity check; all Tegra GPIOs are valid IRQs */ bank = &tegra_gpio_banks[GPIO_BANK(gpio)]; |