Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC Header cleanups from Olof Johansson:
 "This is a collection of header file cleanups, mostly for OMAP and
  AT91, that keeps moving the platforms in the direction of
  multiplatform by removing the need for mach-dependent header files
  used in drivers and other places."

Fix up mostly trivial conflicts as per Olof.

* tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits)
  ARM: OMAP2+: Move iommu/iovmm headers to platform_data
  ARM: OMAP2+: Make some definitions local
  ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c
  ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h
  ARM: OMAP2+: Move iopgtable header to drivers/iommu/
  ARM: OMAP: Merge iommu2.h into iommu.h
  atmel: move ATMEL_MAX_UART to platform_data/atmel.h
  ARM: OMAP: Remove omap_init_consistent_dma_size()
  arm: at91: move at91rm9200 rtc header in drivers/rtc
  arm: at91: move reset controller header to arm/arm/mach-at91
  arm: at91: move pit define to the driver
  arm: at91: move at91_shdwc.h to arch/arm/mach-at91
  arm: at91: move board header to arch/arm/mach-at91
  arn: at91: move at91_tc.h to arch/arm/mach-at91
  arm: at91 move at91_aic.h to arch/arm/mach-at91
  arm: at91 move board.h to arch/arm/mach-at91
  arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
  arm: at91: drop machine defconfig
  ARM: OMAP: Remove NEED_MACH_GPIO_H
  ARM: OMAP: Remove unnecessary mach and plat includes
  ...

1 files changed, 34 insertions, 12 deletions

diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index 1a68c1e5fe5..24d32ca34be 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -8,9 +8,13 @@
  * published by the Free Software Foundation.
  */
 
-#include <plat/gpmc.h>
+#ifndef	_MTD_NAND_OMAP2_H
+#define	_MTD_NAND_OMAP2_H
+
 #include <linux/mtd/partitions.h>
 
+#define	GPMC_BCH_NUM_REMAINDER	8
+
 enum nand_io {
 	NAND_OMAP_PREFETCH_POLLED = 0,	/* prefetch polled mode, default */
 	NAND_OMAP_POLLED,		/* polled mode, without prefetch */
@@ -18,10 +22,38 @@ enum nand_io {
 	NAND_OMAP_PREFETCH_IRQ		/* prefetch enabled irq mode */
 };
 
+enum omap_ecc {
+		/* 1-bit ecc: stored at end of spare area */
+	OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
+	OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
+		/* 1-bit ecc: stored at beginning of spare area as romcode */
+	OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
+	OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
+	OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
+};
+
+struct gpmc_nand_regs {
+	void __iomem	*gpmc_status;
+	void __iomem	*gpmc_nand_command;
+	void __iomem	*gpmc_nand_address;
+	void __iomem	*gpmc_nand_data;
+	void __iomem	*gpmc_prefetch_config1;
+	void __iomem	*gpmc_prefetch_config2;
+	void __iomem	*gpmc_prefetch_control;
+	void __iomem	*gpmc_prefetch_status;
+	void __iomem	*gpmc_ecc_config;
+	void __iomem	*gpmc_ecc_control;
+	void __iomem	*gpmc_ecc_size_config;
+	void __iomem	*gpmc_ecc1_result;
+	void __iomem	*gpmc_bch_result0[GPMC_BCH_NUM_REMAINDER];
+	void __iomem	*gpmc_bch_result1[GPMC_BCH_NUM_REMAINDER];
+	void __iomem	*gpmc_bch_result2[GPMC_BCH_NUM_REMAINDER];
+	void __iomem	*gpmc_bch_result3[GPMC_BCH_NUM_REMAINDER];
+};
+
 struct omap_nand_platform_data {
 	int			cs;
 	struct mtd_partition	*parts;
-	struct gpmc_timings	*gpmc_t;
 	int			nr_parts;
 	bool			dev_ready;
 	enum nand_io		xfer_type;
@@ -30,14 +62,4 @@ struct omap_nand_platform_data {
 	struct gpmc_nand_regs	reg;
 };
 
-/* minimum size for IO mapping */
-#define	NAND_IO_SIZE	4
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-extern int gpmc_nand_init(struct omap_nand_platform_data *d);
-#else
-static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
-{
-	return 0;
-}
 #endif