diff options
| author | Daniel Mack <zonque@gmail.com> | 2012-10-07 18:19:44 +0200 |
|---|---|---|
| committer | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2012-10-17 16:26:51 +0900 |
| commit | 0384e90b853357d24935c65ba0e1bdd27faa6e58 (patch) | |
| tree | 4ee58ec411a372761b15e9316ca6f827c613308f /drivers/spi/spi-omap2-mcspi.c | |
| parent | ddffeb8c4d0331609ef2581d84de4d763607bd37 (diff) | |
| download | olio-linux-3.10-0384e90b853357d24935c65ba0e1bdd27faa6e58.tar.xz olio-linux-3.10-0384e90b853357d24935c65ba0e1bdd27faa6e58.zip | |
spi/mcspi: allow configuration of pin directions
Allow D0 to be an input and D1 to be an output, configurable via
platform data and a new DT property.
Based on a patch from Matus Ujhelyi <matus.ujhelyi@streamunlimited.com>
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'drivers/spi/spi-omap2-mcspi.c')
| -rw-r--r-- | drivers/spi/spi-omap2-mcspi.c | 25 |
1 files changed, 18 insertions, 7 deletions
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 3542fdc664b..51046332677 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -130,6 +130,7 @@ struct omap2_mcspi { struct omap2_mcspi_dma *dma_channels; struct device *dev; struct omap2_mcspi_regs ctx; + unsigned int pin_dir:1; }; struct omap2_mcspi_cs { @@ -765,8 +766,15 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi, /* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS * REVISIT: this controller could support SPI_3WIRE mode. */ - l &= ~(OMAP2_MCSPI_CHCONF_IS|OMAP2_MCSPI_CHCONF_DPE1); - l |= OMAP2_MCSPI_CHCONF_DPE0; + if (mcspi->pin_dir == MCSPI_PINDIR_D0_OUT_D1_IN) { + l &= ~OMAP2_MCSPI_CHCONF_IS; + l &= ~OMAP2_MCSPI_CHCONF_DPE1; + l |= OMAP2_MCSPI_CHCONF_DPE0; + } else { + l |= OMAP2_MCSPI_CHCONF_IS; + l |= OMAP2_MCSPI_CHCONF_DPE1; + l &= ~OMAP2_MCSPI_CHCONF_DPE0; + } /* wordlength */ l &= ~OMAP2_MCSPI_CHCONF_WL_MASK; @@ -1167,6 +1175,11 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev) master->cleanup = omap2_mcspi_cleanup; master->dev.of_node = node; + dev_set_drvdata(&pdev->dev, master); + + mcspi = spi_master_get_devdata(master); + mcspi->master = master; + match = of_match_device(omap_mcspi_of_match, &pdev->dev); if (match) { u32 num_cs = 1; /* default number of chipselect */ @@ -1175,19 +1188,17 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev) of_property_read_u32(node, "ti,spi-num-cs", &num_cs); master->num_chipselect = num_cs; master->bus_num = bus_num++; + if (of_get_property(node, "ti,pindir-d0-in-d1-out", NULL)) + mcspi->pin_dir = MCSPI_PINDIR_D0_IN_D1_OUT; } else { pdata = pdev->dev.platform_data; master->num_chipselect = pdata->num_cs; if (pdev->id != -1) master->bus_num = pdev->id; + mcspi->pin_dir = pdata->pin_dir; } regs_offset = pdata->regs_offset; - dev_set_drvdata(&pdev->dev, master); - - mcspi = spi_master_get_devdata(master); - mcspi->master = master; - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (r == NULL) { status = -ENODEV; |