diff options
| author | Olof Johansson <olof@lixom.net> | 2012-09-20 19:57:38 -0700 |
|---|---|---|
| committer | Olof Johansson <olof@lixom.net> | 2012-09-20 19:57:38 -0700 |
| commit | 32dec75349da4e68b53f099ce3a96469cdc334d6 (patch) | |
| tree | 96aca7914b07697668ec716a3f80fb8c82e7a971 /drivers/net/wireless/rt2x00/rt2800usb.c | |
| parent | 740418ef19fd7def7b9c333435d4ca1dce28cc42 (diff) | |
| parent | 9891e3240543c45176b1298164418b61e8909ed0 (diff) | |
| download | olio-linux-3.10-32dec75349da4e68b53f099ce3a96469cdc334d6.tar.xz olio-linux-3.10-32dec75349da4e68b53f099ce3a96469cdc334d6.zip | |
Merge tag 'tegra-for-3.7-dmaengine' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup
ARM: tegra: switch to dmaengine
The Tegra code-base has contained both a legacy DMA and a dmaengine
driver since v3.6-rcX. This series flips Tegra's defconfig to enable
dmaengine rather than the legacy driver, and removes the legacy driver
and all client code.
* tag 'tegra-for-3.7-dmaengine' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ASoC: tegra: remove support of legacy DMA driver based access
spi: tegra: remove support of legacy DMA driver based access
ARM: tegra: apbio: remove support of legacy DMA driver based access
ARM: tegra: dma: remove legacy APB DMA driver
ARM: tegra: config: enable dmaengine based APB DMA driver
+ sync to 3.6-rc6
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2800usb.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2800usb.c | 22 |
1 files changed, 20 insertions, 2 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 6cf336595e2..6b4226b7161 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -667,8 +667,16 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, skb_pull(entry->skb, RXINFO_DESC_SIZE); /* - * FIXME: we need to check for rx_pkt_len validity + * Check for rx_pkt_len validity. Return if invalid, leaving + * rxdesc->size zeroed out by the upper level. */ + if (unlikely(rx_pkt_len == 0 || + rx_pkt_len > entry->queue->data_size)) { + ERROR(entry->queue->rt2x00dev, + "Bad frame size %d, forcing to 0\n", rx_pkt_len); + return; + } + rxd = (__le32 *)(entry->skb->data + rx_pkt_len); /* @@ -736,6 +744,7 @@ static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + u32 reg; /* * Allocate eeprom data. @@ -749,6 +758,14 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) return retval; /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); + rt2x00_set_field32(®, GPIO_CTRL_CFG_GPIOD_BIT2, 1); + rt2x00usb_register_write(rt2x00dev, GPIO_CTRL_CFG, reg); + + /* * Initialize hw specifications. */ retval = rt2800_probe_hw_mode(rt2x00dev); @@ -1157,6 +1174,8 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x1690, 0x0744) }, { USB_DEVICE(0x1690, 0x0761) }, { USB_DEVICE(0x1690, 0x0764) }, + /* ASUS */ + { USB_DEVICE(0x0b05, 0x179d) }, /* Cisco */ { USB_DEVICE(0x167b, 0x4001) }, /* EnGenius */ @@ -1222,7 +1241,6 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x0b05, 0x1760) }, { USB_DEVICE(0x0b05, 0x1761) }, { USB_DEVICE(0x0b05, 0x1790) }, - { USB_DEVICE(0x0b05, 0x179d) }, /* AzureWave */ { USB_DEVICE(0x13d3, 0x3262) }, { USB_DEVICE(0x13d3, 0x3284) }, |