Merge tag 'omap-for-v3.8/cleanup-headers-signed' into omap-for-v3.8/cleanup-headers-serial-take2

This is the first set of omap cleanup patches for v3.8 merge
window to remove most of the remaining plat includes to get us
closer to ARM common zImage support.

To avoid a huge amount of trivial merge conflicts with includes,
this branch is based on several small topic branches coordinated
with the driver subsystem maintainers. These branches are based on
v3.7-rc1 and can also be merged into the related driver subsystem
branches as needed:

omap-for-v3.8/cleanup-headers-prepare   few trivial driver changes
omap-for-v3.8/cleanup-headers-dma       move of the DMA header
omap-for-v3.8/cleanup-headers-gpmc      GPMC and MTD changes
omap-for-v3.8/cleanup-headers-mmc       MMC related changes
omap-for-v3.8/cleanup-headers-dss       DSS related changes
omap-for-v3.8/cleanup-headers-asoc      ASoC related changes

Note that for the dma-omap.h, it was decided that it should be
is completed. For the related discussion, please see:

https://patchwork.kernel.org/patch/1519591/#

After these patches we still have a few plat headers remaining
that will be handled in later pull requests.

1 files changed, 107 insertions, 22 deletions

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 5b313862064..5c8978e9024 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -27,8 +27,7 @@
 #include <linux/bch.h>
 #endif
 
-#include <plat/dma.h>
-#include <plat/gpmc.h>
+#include <plat-omap/dma-omap.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 
 #define	DRIVER_NAME	"omap2-nand"
@@ -106,10 +105,18 @@
 #define	CS_MASK				0x7
 #define	ENABLE_PREFETCH			(0x1 << 7)
 #define	DMA_MPU_MODE_SHIFT		2
+#define	ECCSIZE0_SHIFT			12
 #define	ECCSIZE1_SHIFT			22
 #define	ECC1RESULTSIZE			0x1
 #define	ECCCLEAR			0x100
 #define	ECC1				0x1
+#define	PREFETCH_FIFOTHRESHOLD_MAX	0x40
+#define	PREFETCH_FIFOTHRESHOLD(val)	((val) << 8)
+#define	PREFETCH_STATUS_COUNT(val)	(val & 0x00003fff)
+#define	PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
+#define	STATUS_BUFF_EMPTY		0x00000001
+
+#define OMAP24XX_DMA_GPMC		4
 
 /* oob info generated runtime depending on ecc algorithm and layout selected */
 static struct nand_ecclayout omap_oobinfo;
@@ -269,7 +276,7 @@ static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
 		/* wait until buffer is available for write */
 		do {
 			status = readl(info->reg.gpmc_status) &
-					GPMC_STATUS_BUFF_EMPTY;
+					STATUS_BUFF_EMPTY;
 		} while (!status);
 	}
 }
@@ -307,7 +314,7 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
 		/* wait until buffer is available for write */
 		do {
 			status = readl(info->reg.gpmc_status) &
-					GPMC_STATUS_BUFF_EMPTY;
+					STATUS_BUFF_EMPTY;
 		} while (!status);
 	}
 }
@@ -348,7 +355,7 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
 	} else {
 		do {
 			r_count = readl(info->reg.gpmc_prefetch_status);
-			r_count = GPMC_PREFETCH_STATUS_FIFO_CNT(r_count);
+			r_count = PREFETCH_STATUS_FIFO_CNT(r_count);
 			r_count = r_count >> 2;
 			ioread32_rep(info->nand.IO_ADDR_R, p, r_count);
 			p += r_count;
@@ -395,7 +402,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
 	} else {
 		while (len) {
 			w_count = readl(info->reg.gpmc_prefetch_status);
-			w_count = GPMC_PREFETCH_STATUS_FIFO_CNT(w_count);
+			w_count = PREFETCH_STATUS_FIFO_CNT(w_count);
 			w_count = w_count >> 1;
 			for (i = 0; (i < w_count) && len; i++, len -= 2)
 				iowrite16(*p++, info->nand.IO_ADDR_W);
@@ -407,7 +414,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
 		do {
 			cpu_relax();
 			val = readl(info->reg.gpmc_prefetch_status);
-			val = GPMC_PREFETCH_STATUS_COUNT(val);
+			val = PREFETCH_STATUS_COUNT(val);
 		} while (val && (tim++ < limit));
 
 		/* disable and stop the PFPW engine */
@@ -493,7 +500,7 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 	do {
 		cpu_relax();
 		val = readl(info->reg.gpmc_prefetch_status);
-		val = GPMC_PREFETCH_STATUS_COUNT(val);
+		val = PREFETCH_STATUS_COUNT(val);
 	} while (val && (tim++ < limit));
 
 	/* disable and stop the PFPW engine */
@@ -556,7 +563,7 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev)
 	u32 bytes;
 
 	bytes = readl(info->reg.gpmc_prefetch_status);
-	bytes = GPMC_PREFETCH_STATUS_FIFO_CNT(bytes);
+	bytes = PREFETCH_STATUS_FIFO_CNT(bytes);
 	bytes = bytes  & 0xFFFC; /* io in multiple of 4 bytes */
 	if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
 		if (this_irq == info->gpmc_irq_count)
@@ -682,7 +689,7 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd,
 	limit = (loops_per_jiffy *  msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
 	do {
 		val = readl(info->reg.gpmc_prefetch_status);
-		val = GPMC_PREFETCH_STATUS_COUNT(val);
+		val = PREFETCH_STATUS_COUNT(val);
 		cpu_relax();
 	} while (val && (tim++ < limit));
 
@@ -996,7 +1003,7 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
 		cond_resched();
 	}
 
-	status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA);
+	status = readb(info->reg.gpmc_nand_data);
 	return status;
 }
 
@@ -1029,19 +1036,45 @@ static int omap_dev_ready(struct mtd_info *mtd)
 static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
 {
 	int nerrors;
-	unsigned int dev_width;
+	unsigned int dev_width, nsectors;
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
 	struct nand_chip *chip = mtd->priv;
+	u32 val;
 
 	nerrors = (info->nand.ecc.bytes == 13) ? 8 : 4;
 	dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+	nsectors = 1;
 	/*
 	 * Program GPMC to perform correction on one 512-byte sector at a time.
 	 * Using 4 sectors at a time (i.e. ecc.size = 2048) is also possible and
 	 * gives a slight (5%) performance gain (but requires additional code).
 	 */
-	(void)gpmc_enable_hwecc_bch(info->gpmc_cs, mode, dev_width, 1, nerrors);
+
+	writel(ECC1, info->reg.gpmc_ecc_control);
+
+	/*
+	 * When using BCH, sector size is hardcoded to 512 bytes.
+	 * Here we are using wrapping mode 6 both for reading and writing, with:
+	 *  size0 = 0  (no additional protected byte in spare area)
+	 *  size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
+	 */
+	val = (32 << ECCSIZE1_SHIFT) | (0 << ECCSIZE0_SHIFT);
+	writel(val, info->reg.gpmc_ecc_size_config);
+
+	/* BCH configuration */
+	val = ((1                        << 16) | /* enable BCH */
+	       (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
+	       (0x06                     <<  8) | /* wrap mode = 6 */
+	       (dev_width                <<  7) | /* bus width */
+	       (((nsectors-1) & 0x7)     <<  4) | /* number of sectors */
+	       (info->gpmc_cs            <<  1) | /* ECC CS */
+	       (0x1));                            /* enable ECC */
+
+	writel(val, info->reg.gpmc_ecc_config);
+
+	/* clear ecc and enable bits */
+	writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
 }
 
 /**
@@ -1055,7 +1088,32 @@ static int omap3_calculate_ecc_bch4(struct mtd_info *mtd, const u_char *dat,
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
-	return gpmc_calculate_ecc_bch4(info->gpmc_cs, dat, ecc_code);
+	unsigned long nsectors, val1, val2;
+	int i;
+
+	nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+
+	for (i = 0; i < nsectors; i++) {
+
+		/* Read hw-computed remainder */
+		val1 = readl(info->reg.gpmc_bch_result0[i]);
+		val2 = readl(info->reg.gpmc_bch_result1[i]);
+
+		/*
+		 * Add constant polynomial to remainder, in order to get an ecc
+		 * sequence of 0xFFs for a buffer filled with 0xFFs; and
+		 * left-justify the resulting polynomial.
+		 */
+		*ecc_code++ = 0x28 ^ ((val2 >> 12) & 0xFF);
+		*ecc_code++ = 0x13 ^ ((val2 >>  4) & 0xFF);
+		*ecc_code++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
+		*ecc_code++ = 0x39 ^ ((val1 >> 20) & 0xFF);
+		*ecc_code++ = 0x96 ^ ((val1 >> 12) & 0xFF);
+		*ecc_code++ = 0xac ^ ((val1 >> 4) & 0xFF);
+		*ecc_code++ = 0x7f ^ ((val1 & 0xF) << 4);
+	}
+
+	return 0;
 }
 
 /**
@@ -1069,7 +1127,39 @@ static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat,
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
-	return gpmc_calculate_ecc_bch8(info->gpmc_cs, dat, ecc_code);
+	unsigned long nsectors, val1, val2, val3, val4;
+	int i;
+
+	nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+
+	for (i = 0; i < nsectors; i++) {
+
+		/* Read hw-computed remainder */
+		val1 = readl(info->reg.gpmc_bch_result0[i]);
+		val2 = readl(info->reg.gpmc_bch_result1[i]);
+		val3 = readl(info->reg.gpmc_bch_result2[i]);
+		val4 = readl(info->reg.gpmc_bch_result3[i]);
+
+		/*
+		 * Add constant polynomial to remainder, in order to get an ecc
+		 * sequence of 0xFFs for a buffer filled with 0xFFs.
+		 */
+		*ecc_code++ = 0xef ^ (val4 & 0xFF);
+		*ecc_code++ = 0x51 ^ ((val3 >> 24) & 0xFF);
+		*ecc_code++ = 0x2e ^ ((val3 >> 16) & 0xFF);
+		*ecc_code++ = 0x09 ^ ((val3 >> 8) & 0xFF);
+		*ecc_code++ = 0xed ^ (val3 & 0xFF);
+		*ecc_code++ = 0x93 ^ ((val2 >> 24) & 0xFF);
+		*ecc_code++ = 0x9a ^ ((val2 >> 16) & 0xFF);
+		*ecc_code++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
+		*ecc_code++ = 0x97 ^ (val2 & 0xFF);
+		*ecc_code++ = 0x79 ^ ((val1 >> 24) & 0xFF);
+		*ecc_code++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
+		*ecc_code++ = 0x24 ^ ((val1 >> 8) & 0xFF);
+		*ecc_code++ = 0xb5 ^ (val1 & 0xFF);
+	}
+
+	return 0;
 }
 
 /**
@@ -1125,7 +1215,7 @@ static void omap3_free_bch(struct mtd_info *mtd)
  */
 static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
 {
-	int ret, max_errors;
+	int max_errors;
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
 #ifdef CONFIG_MTD_NAND_OMAP_BCH8
@@ -1142,11 +1232,6 @@ static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
 		goto fail;
 	}
 
-	/* initialize GPMC BCH engine */
-	ret = gpmc_init_hwecc_bch(info->gpmc_cs, 1, max_errors);
-	if (ret)
-		goto fail;
-
 	/* software bch library is only used to detect and locate errors */
 	info->bch = init_bch(13, max_errors, 0x201b /* hw polynomial */);
 	if (!info->bch)
@@ -1513,7 +1598,7 @@ static int omap_nand_remove(struct platform_device *pdev)
 	/* Release NAND device, its internal structures and partitions */
 	nand_release(&info->mtd);
 	iounmap(info->nand.IO_ADDR_R);
-	release_mem_region(info->phys_base, NAND_IO_SIZE);
+	release_mem_region(info->phys_base, info->mem_size);
 	kfree(info);
 	return 0;
 }