Merge tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD update from Samuel Ortiz:
 "For 3.10 we have a few new MFD drivers for:

   - The ChromeOS embedded controller which provides keyboard, battery
     and power management services.  This controller is accessible
     through i2c or SPI.

   - Silicon Laboratories 476x controller, providing access to their FM
     chipset and their audio codec.

   - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based
     reader.

   - Nokia's Tahvo power button and watchdog device.  This device is
     very similar to Retu and is thus supported by the same code base.

   - STMicroelectronics STMPE1801, a keyboard and GPIO controller
     supported by the stmpe driver.

   - ST-Ericsson AB8540 and AB8505 power management and voltage
     converter controllers through the existing ab8500 code.

  Some other drivers got cleaned up or improved.  In particular:

   - The Linaro/STE guys got the ab8500 driver in sync with their
     internal code through a series of optimizations, fixes and
     improvements.

   - The AS3711 and OMAP USB drivers now have DT support.

   - The arizona clock and interrupt handling code got improved.

   - The wm5102 register patch and boot mechanism also got improved."

* tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits)
  mfd: si476x: Don't use 0bNNN
  mfd: vexpress: Handle pending config transactions
  mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly
  mfd: si476x: Fix i2c warning
  mfd: si476x: Add header files and Kbuild plumbing
  mfd: si476x: Add chip properties handling code
  mfd: si476x: Add the bulk of the core driver
  mfd: si476x: Add commands abstraction layer
  mfd: rtsx: Support RTS5249
  mfd: retu: Add Tahvo support
  mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus
  mfd: wm8994: Add some OF properties
  mfd: wm8994: Add device ID data to WM8994 OF device IDs
  input: Export matrix_keypad_parse_of_params()
  mfd: tps65090: Add compatible string for charger subnode
  mfd: db8500-prcmu: Support platform dependant device selection
  mfd: syscon: Fix warnings when printing resource_size_t
  of: Add stub of_get_parent for non-OF builds
  mfd: omap-usb-tll: Convert to devm_ioremap_resource()
  mfd: omap-usb-host: Convert to devm_ioremap_resource()
  ...

1 files changed, 15 insertions, 13 deletions

diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index f276352cc9e..8e8a016effe 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -458,22 +458,23 @@ static void update_latch_offset(u8 *offset, int i)
 static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
 					int latch_offset, u8 latch_val)
 {
-	int int_bit = __ffs(latch_val);
-	int line, i;
+	int int_bit, line, i;
 
-	do {
-		int_bit = __ffs(latch_val);
+	for (i = 0; i < ab8500->mask_size; i++)
+		if (ab8500->irq_reg_offset[i] == latch_offset)
+			break;
 
-		for (i = 0; i < ab8500->mask_size; i++)
-			if (ab8500->irq_reg_offset[i] == latch_offset)
-				break;
+	if (i >= ab8500->mask_size) {
+		dev_err(ab8500->dev, "Register offset 0x%2x not declared\n",
+				latch_offset);
+		return -ENXIO;
+	}
 
-		if (i >= ab8500->mask_size) {
-			dev_err(ab8500->dev, "Register offset 0x%2x not declared\n",
-					latch_offset);
-			return -ENXIO;
-		}
+	/* ignore masked out interrupts */
+	latch_val &= ~ab8500->mask[i];
 
+	while (latch_val) {
+		int_bit = __ffs(latch_val);
 		line = (i << 3) + int_bit;
 		latch_val &= ~(1 << int_bit);
 
@@ -491,7 +492,7 @@ static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
 			line += 1;
 
 		handle_nested_irq(ab8500->irq_base + line);
-	} while (latch_val);
+	}
 
 	return 0;
 }
@@ -1107,6 +1108,7 @@ static struct mfd_cell ab8500_devs[] = {
 	},
 	{
 		.name = "ab8500-usb",
+		.of_compatible = "stericsson,ab8500-usb",
 		.num_resources = ARRAY_SIZE(ab8500_usb_resources),
 		.resources = ab8500_usb_resources,
 	},