Reverting all changes from Invensense MotionApps patches

Change-Id: Iec2359e6f39a6c4dd34b3feb4a85f563165ba255

1 files changed, 0 insertions, 1078 deletions

diff --git a/drivers/iio/imu-aosp/inv_mpu6515/inv_mpu_iio.h b/drivers/iio/imu-aosp/inv_mpu6515/inv_mpu_iio.h
deleted file mode 100644
index 701d4db78ed..00000000000
--- a/drivers/iio/imu-aosp/inv_mpu6515/inv_mpu_iio.h
+++ /dev/null
@@ -1,1078 +0,0 @@
-/*
-* Copyright (C) 2012 Invensense, Inc.
-*
-* This software is licensed under the terms of the GNU General Public
-* License version 2, as published by the Free Software Foundation, and
-* may be copied, distributed, and modified under those terms.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*/
-
-#ifndef _INV_MPU_IIO_H_
-#define _INV_MPU_IIO_H_
-
-#include <linux/i2c.h>
-#include <linux/kfifo.h>
-#include <linux/miscdevice.h>
-#include <linux/spinlock.h>
-#include <linux/mpu.h>
-
-#include "iio.h"
-#include "buffer.h"
-
-#include "dmpKey.h"
-
-/*register and associated bit definition*/
-#define REG_3050_FIFO_EN         0x12
-#define BITS_3050_ACCEL_OUT      0x0E
-
-#define REG_3050_AUX_VDDIO       0x13
-#define BIT_3050_VDDIO           0x04
-
-#define REG_3050_SLAVE_ADDR      0x14
-#define REG_3050_SAMPLE_RATE_DIV 0x15
-#define REG_3050_LPF             0x16
-#define REG_3050_INT_ENABLE      0x17
-#define REG_3050_AUX_BST_ADDR    0x18
-#define REG_3050_INT_STATUS      0x1A
-#define REG_3050_TEMPERATURE     0x1B
-#define REG_3050_RAW_GYRO        0x1D
-#define REG_3050_AUX_XOUT_H      0x23
-#define REG_3050_FIFO_COUNT_H    0x3A
-#define REG_3050_FIFO_R_W        0x3C
-
-#define REG_3050_USER_CTRL       0x3D
-#define BIT_3050_AUX_IF_EN       0x20
-#define BIT_3050_FIFO_RST        0x02
-
-#define REG_3050_PWR_MGMT_1      0x3E
-#define BITS_3050_POWER1         0x30
-#define BITS_3050_POWER2         0x10
-#define BITS_3050_GYRO_STANDBY   0x38
-
-#define REG_3500_OTP            0x0
-
-#define REG_YGOFFS_TC           0x1
-#define BIT_I2C_MST_VDDIO       0x80
-
-#define REG_XA_OFFS_H           0x6
-#define REG_XA_OFFS_L_TC        0x7
-#define REG_PRODUCT_ID          0xC
-#define REG_ST_GCT_X            0xD
-#define REG_XG_OFFS_USRH        0x13
-#define REG_SAMPLE_RATE_DIV     0x19
-#define REG_CONFIG              0x1A
-
-#define REG_GYRO_CONFIG         0x1B
-#define BITS_SELF_TEST_EN       0xE0
-
-#define REG_ACCEL_CONFIG        0x1C
-#define REG_ACCEL_MOT_THR       0x1F
-#define REG_ACCEL_MOT_DUR       0x20
-
-#define REG_FIFO_EN             0x23
-#define BIT_ACCEL_OUT           0x08
-#define BITS_GYRO_OUT           0x70
-
-#define REG_I2C_MST_CTRL        0x24
-#define BIT_WAIT_FOR_ES         0x40
-
-#define REG_I2C_SLV0_ADDR       0x25
-#define REG_I2C_SLV0_REG        0x26
-#define REG_I2C_SLV0_CTRL       0x27
-#define REG_I2C_SLV1_ADDR       0x28
-#define REG_I2C_SLV1_REG        0x29
-#define REG_I2C_SLV1_CTRL       0x2A
-#define REG_I2C_SLV2_ADDR       0x2B
-#define REG_I2C_SLV2_REG        0x2C
-#define REG_I2C_SLV2_CTRL       0x2D
-#define REG_I2C_SLV3_ADDR       0x2E
-#define REG_I2C_SLV3_REG        0x2F
-#define REG_I2C_SLV3_CTRL       0x30
-#define REG_I2C_SLV4_CTRL       0x34
-
-#define INV_MPU_BIT_SLV_EN      0x80
-#define INV_MPU_BIT_BYTE_SW     0x40
-#define INV_MPU_BIT_REG_DIS     0x20
-#define INV_MPU_BIT_GRP         0x10
-#define INV_MPU_BIT_I2C_READ    0x80
-
-#define REG_INT_PIN_CFG         0x37
-#define BIT_BYPASS_EN           0x2
-
-#define REG_INT_ENABLE          0x38
-#define BIT_DATA_RDY_EN         0x01
-#define BIT_DMP_INT_EN          0x02
-#define BIT_ZMOT_EN             0x20
-#define BIT_MOT_EN              0x40
-#define BIT_6500_WOM_EN         0x40
-
-#define REG_DMP_INT_STATUS      0x39
-#define BIT_DMP_INT_CI          0x01
-
-#define REG_INT_STATUS          0x3A
-#define BIT_MOT_INT             0x40
-#define BIT_ZMOT_INT            0x20
-
-#define REG_RAW_ACCEL           0x3B
-#define REG_TEMPERATURE         0x41
-#define REG_EXT_SENS_DATA_00    0x49
-#define REG_EXT_SENS_DATA_08    0x51
-#define REG_EXT_SENS_DATA_09    0x52
-
-#define REG_ACCEL_INTEL_STATUS  0x61
-
-#define INV_MPU_REG_I2C_SLV0_DO         0x63
-#define INV_MPU_REG_I2C_SLV1_DO         0x64
-#define INV_MPU_REG_I2C_SLV2_DO         0x65
-#define INV_MPU_REG_I2C_SLV3_DO         0x66
-
-#define REG_I2C_MST_DELAY_CTRL  0x67
-#define BIT_SLV0_DLY_EN                 0x01
-#define BIT_SLV1_DLY_EN                 0x02
-#define BIT_SLV2_DLY_EN                 0x04
-#define BIT_SLV3_DLY_EN                 0x08
-
-#define REG_USER_CTRL           0x6A
-#define BIT_FIFO_RST                    0x04
-#define BIT_DMP_RST                     0x08
-#define BIT_I2C_MST_EN                  0x20
-#define BIT_FIFO_EN                     0x40
-#define BIT_DMP_EN                      0x80
-
-#define REG_PWR_MGMT_1          0x6B
-#define BIT_H_RESET                     0x80
-#define BIT_SLEEP                       0x40
-#define BIT_CYCLE                       0x20
-#define BIT_CLK_MASK                    0x7
-
-#define REG_PWR_MGMT_2          0x6C
-#define BIT_PWR_ACCEL_STBY              0x38
-#define BIT_PWR_GYRO_STBY               0x07
-#define BIT_LPA_FREQ                    0xC0
-
-#define REG_BANK_SEL            0x6D
-#define REG_MEM_START_ADDR      0x6E
-#define REG_MEM_RW              0x6F
-#define REG_PRGM_STRT_ADDRH     0x70
-#define REG_FIFO_COUNT_H        0x72
-#define REG_FIFO_R_W            0x74
-#define REG_WHOAMI              0x75
-
-#define REG_6500_XG_ST_DATA     0x0
-#define REG_6500_XA_ST_DATA     0xD
-#define REG_6500_XA_OFFS_H      0x77
-#define REG_6500_YA_OFFS_H      0x7A
-#define REG_6500_ZA_OFFS_H      0x7D
-#define REG_6500_ACCEL_CONFIG2  0x1D
-#define BIT_ACCEL_FCHOCIE_B              0x08
-#define BIT_FIFO_SIZE_1K                 0x40
-
-#define REG_6500_LP_ACCEL_ODR   0x1E
-#define REG_6500_ACCEL_WOM_THR  0x1F
-
-#define REG_6500_ACCEL_INTEL_CTRL 0x69
-#define BIT_ACCEL_INTEL_ENABLE          0x80
-#define BIT_ACCEL_INTEL_MODE            0x40
-
-/* data definitions */
-#define DMP_START_ADDR           0x400
-#define DMP_MASK_TAP             0x3f
-#define DMP_MASK_DIS_ORIEN       0xC0
-#define DMP_DIS_ORIEN_SHIFT      6
-/* this is derived from 1000 divided by 50, which is the pedometer
-   running frequency */
-#define MS_PER_PED_TICKS         20
-
-
-#define BYTES_FOR_DMP            8
-#define BYTES_FOR_EVENTS         4
-#define QUATERNION_BYTES         16
-#define BYTES_PER_SENSOR         6
-#define MPU3050_FOOTER_SIZE      2
-#define FIFO_COUNT_BYTE          2
-#define FIFO_THRESHOLD           800
-#define FIFO_SIZE                992
-#define HARDWARE_FIFO_SIZE       1024
-#define MAX_READ_SIZE            64
-#define POWER_UP_TIME            100
-#define SENSOR_UP_TIME           30
-#define REG_UP_TIME              2
-#define INV_MPU_SAMPLE_RATE_CHANGE_STABLE 50
-#define MPU_MEM_BANK_SIZE        256
-#define SELF_TEST_GYRO_FULL_SCALE 250
-#define SELF_TEST_ACCEL_FULL_SCALE 8
-#define SELF_TEST_ACCEL_6500_SCALE 2
-
-/* data header defines */
-#define PRESSURE_HDR             0x8000
-#define ACCEL_HDR                0x4000
-#define GYRO_HDR                 0x2000
-#define COMPASS_HDR              0x1000
-#define COMPASS_HDR_2            0x1800
-#define LPQUAT_HDR               0x0800
-#define SIXQUAT_HDR              0x0400
-#define PEDQUAT_HDR              0x0200
-#define STEP_DETECTOR_HDR        0x0100
-#define STEP_INDICATOR_MASK      0xf
-
-#define MAX_BYTES_PER_SAMPLE     80
-#define MAX_HW_FIFO_BYTES        (BYTES_PER_SENSOR * 2)
-#define IIO_BUFFER_BYTES         8
-#define HEADERED_NORMAL_BYTES    8
-#define HEADERED_Q_BYTES         16
-
-#define MPU6XXX_MAX_MOTION_THRESH (255*4)
-#define MPU6050_MOTION_THRESH_SHIFT 5
-#define MPU6500_MOTION_THRESH_SHIFT 2
-#define MPU6050_MOTION_DUR_DEFAULT  1
-#define MPU6050_ID               0x68
-#define MPU6050_MAX_MOTION_DUR   255
-#define MPU_TEMP_SHIFT           16
-#define LPA_FREQ_SHIFT           6
-#define COMPASS_RATE_SCALE       10
-#define MAX_GYRO_FS_PARAM        3
-#define MAX_ACCEL_FS_PARAM        3
-#define MAX_LPA_FREQ_PARAM       3
-#define MPU_MAX_A_OFFSET_VALUE     16383
-#define MPU_MIN_A_OFFSET_VALUE     -16384
-#define MPU_MAX_G_OFFSET_VALUE     32767
-#define MPU_MIN_G_OFFSET_VALUE     -32767
-#define MPU6XXX_MAX_MPU_MEM      (256 * 12)
-
-#define INIT_MOT_DUR             128
-#define INIT_MOT_THR             128
-#define INIT_ZMOT_DUR            128
-#define INIT_ZMOT_THR            128
-#define INIT_ST_SAMPLES          200
-#define INIT_ST_MPU6050_SAMPLES  600
-#define INIT_ST_THRESHOLD        50
-#define INIT_PED_INT_THRESH      2
-#define INIT_PED_THRESH          9
-#define ST_THRESHOLD_MULTIPLIER  10
-#define ST_MAX_SAMPLES           500
-#define ST_MAX_THRESHOLD         100
-#define DMP_INTERVAL_INIT       (5 * NSEC_PER_MSEC)
-#define DMP_INTERVAL_MIN_ADJ    (50 * NSEC_PER_USEC)
-
-/*---- MPU6500 ----*/
-#define MPU6500_ID               0x70      /* unique WHOAMI */
-#define MPU6515_ID               0x74      /* unique WHOAMI */
-#define MPU6500_PRODUCT_REVISION 1
-#define MPU6500_MEM_REV_ADDR     0x16
-#define INV_MPU_REV_MASK         0x0F
-#define MPU6500_REV              2
-#define MPU_DMP_LOAD_START       0x20
-
-/*---- MPU9250 ----*/
-#define MPU9250_ID               0x71      /* unique WHOAMI */
-
-/* ----MPU9350 ----*/
-#define MPU9350_ID               0x72
-
-#define THREE_AXIS               3
-#define GYRO_CONFIG_FSR_SHIFT    3
-#define ACCEL_CONFIG_FSR_SHIFT    3
-#define GYRO_DPS_SCALE           250
-#define MEM_ADDR_PROD_REV        0x6
-#define SOFT_PROD_VER_BYTES      5
-#define CRC_FIRMWARE_SEED        0
-#define SELF_TEST_SUCCESS        1
-#define MS_PER_DMP_TICK          20
-#define DMP_IMAGE_SIZE           2943
-
-/* init parameters */
-#define INIT_FIFO_RATE           50
-#define INIT_DMP_OUTPUT_RATE     25
-#define INIT_DUR_TIME           (NSEC_PER_SEC / INIT_FIFO_RATE)
-#define INIT_TAP_THRESHOLD       100
-#define INIT_TAP_TIME            100
-#define INIT_TAP_MIN_COUNT       2
-#define INIT_SAMPLE_DIVIDER      4
-#define MPU_INIT_SMD_DELAY_THLD  3
-#define MPU_INIT_SMD_DELAY2_THLD 1
-#define MPU_INIT_SMD_THLD        1500
-#define MPU_DEFAULT_DMP_FREQ     200
-#define MPL_PROD_KEY(ver, rev)  (ver * 100 + rev)
-#define NUM_OF_PROD_REVS (ARRAY_SIZE(prod_rev_map))
-/*---- MPU6050 Silicon Revisions ----*/
-#define MPU_SILICON_REV_A2                    1       /* MPU6050A2 Device */
-#define MPU_SILICON_REV_B1                    2       /* MPU6050B1 Device */
-
-#define BIT_PRFTCH_EN                         0x40
-#define BIT_CFG_USER_BANK                     0x20
-#define BITS_MEM_SEL                          0x1f
-
-#define TIME_STAMP_TOR                        5
-#define MAX_CATCH_UP                          5
-#define DMP_TICK_DUR                          5
-#define DEFAULT_ACCEL_TRIM                    16384
-#define DEFAULT_GYRO_TRIM                     131
-#define MAX_FIFO_RATE                         1000
-#define MAX_DMP_OUTPUT_RATE                   200
-#define MIN_FIFO_RATE                         4
-#define ONE_K_HZ                              1000
-#define NS_PER_MS_SHIFT                       20
-#define END_MARKER                            0x0010
-#define EMPTY_MARKER                          0x0020
-
-/*tap related defines */
-#define INV_TAP                               0x08
-#define INV_NUM_TAP_AXES                      3
-
-#define INV_TAP_AXIS_X_POS                    0x20
-#define INV_TAP_AXIS_X_NEG                    0x10
-#define INV_TAP_AXIS_Y_POS                    0x08
-#define INV_TAP_AXIS_Y_NEG                    0x04
-#define INV_TAP_AXIS_Z_POS                    0x02
-#define INV_TAP_AXIS_Z_NEG                    0x01
-#define INV_TAP_ALL_DIRECTIONS                0x3f
-
-#define INV_TAP_AXIS_X                        0x1
-#define INV_TAP_AXIS_Y                        0x2
-#define INV_TAP_AXIS_Z                        0x4
-
-#define INV_TAP_AXIS_ALL               \
-		(INV_TAP_AXIS_X            |   \
-		INV_TAP_AXIS_Y             |   \
-		INV_TAP_AXIS_Z)
-
-#define INT_SRC_TAP             0x01
-#define INT_SRC_DISPLAY_ORIENT  0x08
-#define INT_SRC_SHAKE           0x10
-
-#define INV_X_AXIS_INDEX                  0x00
-#define INV_Y_AXIS_INDEX                  0x01
-#define INV_Z_AXIS_INDEX                  0x02
-
-#define INV_ELEMENT_1                     0x0001
-#define INV_ELEMENT_2                     0x0002
-#define INV_ELEMENT_3                     0x0004
-#define INV_ELEMENT_4                     0x0008
-#define INV_ELEMENT_5                     0x0010
-#define INV_ELEMENT_6                     0x0020
-#define INV_ELEMENT_7                     0x0040
-#define INV_ELEMENT_8                     0x0080
-#define INV_ALL                           0xFFFF
-#define INV_ELEMENT_MASK                  0x00FF
-#define INV_GYRO_ACC_MASK                 0x007E
-#define INV_ACCEL_MASK                    0x70
-#define INV_GYRO_MASK                     0xE
-
-struct inv_mpu_state;
-
-/**
- *  struct inv_reg_map_s - Notable slave registers.
- *  @sample_rate_div:	Divider applied to gyro output rate.
- *  @lpf:		Configures internal LPF.
- *  @bank_sel:		Selects between memory banks.
- *  @user_ctrl:		Enables/resets the FIFO.
- *  @fifo_en:		Determines which data will appear in FIFO.
- *  @gyro_config:	gyro config register.
- *  @accel_config:	accel config register
- *  @fifo_count_h:	Upper byte of FIFO count.
- *  @fifo_r_w:		FIFO register.
- *  @raw_accel		Address of first accel register.
- *  @temperature	temperature register
- *  @int_enable:	Interrupt enable register.
- *  @int_status:	Interrupt flags.
- *  @pwr_mgmt_1:	Controls chip's power state and clock source.
- *  @pwr_mgmt_2:	Controls power state of individual sensors.
- *  @mem_start_addr:	Address of first memory read.
- *  @mem_r_w:		Access to memory.
- *  @prgm_strt_addrh	firmware program start address register
- */
-struct inv_reg_map_s {
-	u8 sample_rate_div;
-	u8 lpf;
-	u8 bank_sel;
-	u8 user_ctrl;
-	u8 fifo_en;
-	u8 gyro_config;
-	u8 accel_config;
-	u8 fifo_count_h;
-	u8 fifo_r_w;
-	u8 raw_accel;
-	u8 temperature;
-	u8 int_enable;
-	u8 int_status;
-	u8 pwr_mgmt_1;
-	u8 pwr_mgmt_2;
-	u8 mem_start_addr;
-	u8 mem_r_w;
-	u8 prgm_strt_addrh;
-};
-
-/* device enum */
-enum inv_devices {
-	INV_ITG3500,
-	INV_MPU3050,
-	INV_MPU6050,
-	INV_MPU9150,
-	INV_MPU6500,
-	INV_MPU9250,
-	INV_MPU6XXX,
-	INV_MPU9350,
-	INV_MPU6515,
-	INV_NUM_PARTS
-};
-
-/**
- *  struct inv_hw_s - Other important hardware information.
- *  @num_reg:	Number of registers on device.
- *  @name:      name of the chip
- */
-struct inv_hw_s {
-	u8 num_reg;
-	u8 *name;
-};
-
-/* enum for sensor */
-enum INV_SENSORS {
-	SENSOR_GYRO = 0,
-	SENSOR_ACCEL,
-	SENSOR_COMPASS,
-	SENSOR_PRESSURE,
-	SENSOR_STEP,
-	SENSOR_PEDQ,
-	SENSOR_SIXQ,
-	SENSOR_LPQ,
-	SENSOR_NUM_MAX,
-	SENSOR_INVALID,
-};
-
-/**
- *  struct inv_sensor - information for each sensor.
- *  @ts: this sensors timestamp.
- *  @dur: duration between samples in ns.
- *  @rate:  sensor data rate.
- *  @counter: dmp tick counter corresponding to rate.
- *  @on:    sensor on/off.
- *  @sample_size: number of bytes for the sensor.
- *  @send_data: function pointer to send data or not.
- *  @set_rate: funcition pointer to set data rate.
- */
-struct inv_sensor {
-	u64 ts;
-	int dur;
-	int rate;
-	int counter;
-	bool on;
-	u8 sample_size;
-	int (*send_data)(struct inv_mpu_state *st, bool on);
-	int (*set_rate)(struct inv_mpu_state *st);
-};
-
-/**
- *  struct inv_batch - information batchmode.
- *  @on: derived variable for batch mode.
- *  @overflow_on: overflow mode for batchmode.
- *  @wake_fifo_on: overflow for suspend mode.
- *  @counter: counter for batch mode.
- *  @timeout: nominal timeout value for batchmode in milliseconds.
- *  @min_rate: minimum sensor rate that is turned on.
- */
-struct inv_batch {
-	bool on;
-	bool overflow_on;
-	bool wake_fifo_on;
-	u32 counter;
-	u32 timeout;
-	u32 min_rate;
-};
-
-/**
- *  struct inv_chip_config_s - Cached chip configuration data.
- *  @fsr:		Full scale range.
- *  @lpf:		Digital low pass filter frequency.
- *  @accel_fs:		accel full scale range.
- *  @has_footer:	MPU3050 specific work around.
- *  @has_compass:	has compass or not.
- *  @has_pressure:      has pressure sensor or not.
- *  @enable:		master enable to enable output
- *  @accel_enable:	enable accel functionality
- *  @gyro_enable:	enable gyro functionality
- *  @is_asleep:		1 if chip is powered down.
- *  @dmp_on:		dmp is on/off.
- *  @dmp_int_on:        dmp interrupt on/off.
- *  @step_indicator_on: step indicate bit added to the sensor or not.
- *  @dmp_event_int_on:  dmp event interrupt on/off.
- *  @firmware_loaded:	flag indicate firmware loaded or not.
- *  @lpa_mod:		low power mode.
- *  @display_orient_on:	display orientation on/off.
- *  @normal_compass_measure: discard first compass data after reset.
- *  @normal_pressure_measure: discard first pressure data after reset.
- *  @smd_enable: disable/enable SMD function.
- *  @adjust_time: flag to indicate whether adjust chip clock or not.
- *  @smd_triggered: smd is triggered.
- *  @lpa_freq:		low power frequency
- *  @prog_start_addr:	firmware program start address.
- *  @fifo_rate:		current FIFO update rate.
- *  @bytes_per_datum: number of bytes for 1 sample data.
- */
-struct inv_chip_config_s {
-	u32 fsr:2;
-	u32 lpf:3;
-	u32 accel_fs:2;
-	u32 has_footer:1;
-	u32 has_compass:1;
-	u32 has_pressure:1;
-	u32 enable:1;
-	u32 accel_enable:1;
-	u32 gyro_enable:1;
-	u32 is_asleep:1;
-	u32 dmp_on:1;
-	u32 dmp_int_on:1;
-	u32 dmp_event_int_on:1;
-	u32 step_indicator_on:1;
-	u32 firmware_loaded:1;
-	u32 lpa_mode:1;
-	u32 display_orient_on:1;
-	u32 normal_compass_measure:1;
-	u32 normal_pressure_measure:1;
-	u32 smd_enable:1;
-	u32 adjust_time:1;
-	u32 smd_triggered:1;
-	u16 lpa_freq;
-	u16 prog_start_addr;
-	u16 fifo_rate;
-	u16 bytes_per_datum;
-};
-
-/**
- *  struct inv_chip_info_s - Chip related information.
- *  @product_id:	Product id.
- *  @product_revision:	Product revision.
- *  @silicon_revision:	Silicon revision.
- *  @software_revision:	software revision.
- *  @multi:		accel specific multiplier.
- *  @compass_sens:	compass sensitivity.
- *  @gyro_sens_trim:	Gyro sensitivity trim factor.
- *  @accel_sens_trim:    accel sensitivity trim factor.
- */
-struct inv_chip_info_s {
-	u8 product_id;
-	u8 product_revision;
-	u8 silicon_revision;
-	u8 software_revision;
-	u8 multi;
-	u8 compass_sens[3];
-	u32 gyro_sens_trim;
-	u32 accel_sens_trim;
-};
-
-/**
- *  struct inv_tap structure to store tap data.
- *  @min_count:  minimum taps counted.
- *  @thresh:    tap threshold.
- *  @time:	tap time.
- *  @on: tap on/off.
- */
-struct inv_tap {
-	u16 min_count;
-	u16 thresh;
-	u16 time;
-	bool on;
-};
-
-/**
- *  struct accel_mot_int_s structure to store motion interrupt data
- *  @mot_thr:    motion threshold.
- *  @mot_dur:    motion duration.
- *  @mot_on:     flag to indicate motion detection on;
- */
-struct accel_mot_int {
-	u16 mot_thr;
-	u32 mot_dur;
-	u8 mot_on:1;
-};
-
-/**
- * struct self_test_setting - self test settables from sysfs
- * samples: number of samples used in self test.
- * threshold: threshold fail/pass criterion in self test.
- *            This value is in the percentage multiplied by 100.
- *            So 14% would be 14.
- */
-struct self_test_setting {
-	u16 samples;
-	u16 threshold;
-};
-
-/**
- * struct inv_smd significant motion detection structure.
- * @threshold: accel threshold for motion detection.
- * @delay: delay time to confirm 2nd motion.
- * @delay2: delay window parameter.
- */
-struct inv_smd {
-	u32 threshold;
-	u32 delay;
-	u32 delay2;
-};
-
-/**
- * struct inv_ped pedometer related data structure.
- * @step: steps taken.
- * @time: time taken during the period.
- * @last_step_time: last time the step is taken.
- * @step_thresh: step threshold to show steps.
- * @int_thresh: step threshold to generate interrupt.
- * @int_on:   pedometer interrupt enable/disable.
- * @on:  pedometer on/off.
- */
-struct inv_ped {
-	u64 step;
-	u64 time;
-	u64 last_step_time;
-	u16 step_thresh;
-	u16 int_thresh;
-	bool int_on;
-	bool on;
-};
-
-struct inv_mpu_slave;
-/**
- *  struct inv_mpu_state - Driver state variables.
- *  @chip_config:	Cached attribute information.
- *  @chip_info:		Chip information from read-only registers.
- *  @trig;              iio trigger.
- *  @tap:               tap data structure.
- *  @smd:               SMD data structure.
- *  @ped:               pedometer data structure.
- *  @batch:             batchmode data structure.
- *  @reg:		Map of important registers.
- *  @self_test:         self test settings.
- *  @hw:		Other hardware-specific information.
- *  @chip_type:		chip type.
- *  @time_stamp_lock:	spin lock to time stamp.
- *  @suspend_resume_lock: mutex lock for suspend/resume.
- *  @client:		i2c client handle.
- *  @plat_data:		platform data.
- *  @slave_accel:       mpu slave handle for accelerometer(MPU3050 only).
- *  @slave_compass:	mpu slave handle for magnetometer.
- *  @slave_pressure:	mpu slave handle for pressure sensor.
- *  (*set_power_state)(struct inv_mpu_state *, int on): function ptr
- *  (*switch_gyro_engine)(struct inv_mpu_state *, int on): function ptr
- *  (*switch_accel_engine)(struct inv_mpu_state *, int on): function ptr
- *  (*init_config)(struct iio_dev *indio_dev): function ptr
- *  (*setup_reg)(struct inv_reg_map_s *reg): function ptr
- *  @timestamps:        kfifo queue to store time stamp.
- *  @irq:               irq number store.
- *  @accel_bias:        accel bias store.
- *  @gyro_bias:         gyro bias store.
- *  @input_gyro_offset[3]: gyro offset from sysfs.
- *  @input_accel_offset[3]: accel offset from sysfs.
- *  @input_accel_dmp_bias[3]: accel bias for dmp.
- *  @input_gyro_dmp_bias[3];: gyro bias for dmp.
- *  @rom_gyro_bias[3]: gyro bias from sysfs.
- *  @rom_accel_bias[3]: accel bias from sysfs.
- *  @fifo_data[6]: fifo data storage.
- *  @i2c_addr:          i2c address.
- *  @sample_divider:    sample divider for dmp.
- *  @fifo_divider:      fifo divider for dmp.
- *  @display_orient_data:display orient data.
- *  @tap_data:          tap data.
- *  @bytes_per_sec: bytes per seconds when in DMP mode.
- *  @left_over[HEADERED_Q_BYTES]: left over bytes storage.
- *  @left_over_size: left over size.
- *  @sensor{SENSOR_NUM_MAX]: sensor individual properties.
- *  @fifo_count: current fifo_count;
- *  @dmp_counter: dmp_counter;
- *  @dmp_ticks: DMP ticks past since the previous read.
- *  @sl_handle:         Handle to I2C port.
- *  @irq_dur_ns:        duration between each irq.
- *  @ts_counter:        time stamp counter.
- *  @suspend_state:     state indicator suspend.
- *  @dmp_interval:      dmp interval. nomial value is 5 ms.
- *  @dmp_interval_accum: dmp interval accumlater.
- *  @diff_accumulater:  accumlator for the difference of nominal and actual.
- *  @last_ts:           last time stamp.
- *  @step_detector_base_ts: base time stamp for step detector calculation.
- *  @prev_ts:           previous time stamp.
- *  @pedometer_step:    pedometer steps stored in driver.
- *  @pedometer_time:    pedometer time stored in driver.
- *  @last_run_time: last time the post ISR runs.
- *  @name: name for distiguish MPU6050 and MPU6500 in MPU6XXX.
- *  @secondary_name: name for the slave device in the secondary I2C.
- */
-struct inv_mpu_state {
-#define TIMESTAMP_FIFO_SIZE 64
-	struct inv_chip_config_s chip_config;
-	struct inv_chip_info_s chip_info;
-	struct iio_trigger  *trig;
-	struct inv_tap tap;
-	struct inv_smd smd;
-	struct inv_ped ped;
-	struct inv_batch batch;
-	struct inv_reg_map_s reg;
-	struct self_test_setting self_test;
-	const struct inv_hw_s *hw;
-	enum   inv_devices chip_type;
-	spinlock_t time_stamp_lock;
-	struct mutex suspend_resume_lock;
-	struct i2c_client *client;
-	struct mpu_platform_data plat_data;
-	struct inv_mpu_slave *slave_accel;
-	struct inv_mpu_slave *slave_compass;
-	struct inv_mpu_slave *slave_pressure;
-	struct accel_mot_int mot_int;
-	int (*set_power_state)(struct inv_mpu_state *, bool on);
-	int (*switch_gyro_engine)(struct inv_mpu_state *, bool on);
-	int (*switch_accel_engine)(struct inv_mpu_state *, bool on);
-	int (*init_config)(struct iio_dev *indio_dev);
-	void (*setup_reg)(struct inv_reg_map_s *reg);
-	DECLARE_KFIFO(timestamps, u64, TIMESTAMP_FIFO_SIZE);
-	short irq;
-	int accel_bias[3];
-	int gyro_bias[3];
-	s16 input_gyro_offset[3];
-	s16 input_accel_offset[3];
-	int input_accel_dmp_bias[3];
-	int input_gyro_dmp_bias[3];
-	s16 rom_gyro_offset[3];
-	s16 rom_accel_offset[3];
-	u8 fifo_data[6];
-	u8 i2c_addr;
-	u8 sample_divider;
-	u8 fifo_divider;
-	u8 display_orient_data;
-	u8 tap_data;
-	u16 bytes_per_sec;
-	u8 left_over[HEADERED_Q_BYTES];
-	u32 left_over_size;
-	struct inv_sensor sensor[SENSOR_NUM_MAX];
-	u32 fifo_count;
-	u32 dmp_counter;
-	u32 dmp_ticks;
-	void *sl_handle;
-	u32 irq_dur_ns;
-	u32 ts_counter;
-	bool suspend_state;
-	u32 dmp_interval;
-	s32 dmp_interval_accum;
-	s64 diff_accumulater;
-	u64 last_ts;
-	u64 step_detector_base_ts;
-	u64 prev_ts;
-	u64 last_run_time;
-	u8 name[20];
-	u8 secondary_name[20];
-};
-
-/* produces an unique identifier for each device based on the
-   combination of product version and product revision */
-struct prod_rev_map_t {
-	u16 mpl_product_key;
-	u8 silicon_rev;
-	u16 gyro_trim;
-	u16 accel_trim;
-};
-
-/**
- *  struct inv_mpu_slave - MPU slave structure.
- *  @st_upper:  compass self test upper limit.
- *  @st_lower:  compass self test lower limit.
- *  @scale: compass scale.
- *  @rate_scale: decide how fast a compass can read.
- *  @min_read_time: minimum time between each reading.
- *  @self_test: self test method of the slave.
- *  @set_scale: set scale of slave
- *  @get_scale: read scale back of the slave.
- *  @suspend:		suspend operation.
- *  @resume:		resume operation.
- *  @setup:		setup chip. initialization.
- *  @combine_data:	combine raw data into meaningful data.
- *  @read_data:        read external sensor and output
- *  @get_mode:		get current chip mode.
- *  @set_lpf:            set low pass filter.
- *  @set_fs:             set full scale
- *  @prev_ts: last time it is read.
- */
-struct inv_mpu_slave {
-	const short *st_upper;
-	const short *st_lower;
-	int scale;
-	int rate_scale;
-	int min_read_time;
-	int (*self_test)(struct inv_mpu_state *);
-	int (*set_scale)(struct inv_mpu_state *, int scale);
-	int (*get_scale)(struct inv_mpu_state *, int *val);
-	int (*suspend)(struct inv_mpu_state *);
-	int (*resume)(struct inv_mpu_state *);
-	int (*setup)(struct inv_mpu_state *);
-	int (*combine_data)(u8 *in, short *out);
-	int (*read_data)(struct inv_mpu_state *, short *out);
-	int (*get_mode)(void);
-	int (*set_lpf)(struct inv_mpu_state *, int rate);
-	int (*set_fs)(struct inv_mpu_state *, int fs);
-	u64 prev_ts;
-};
-
-/* scan element definition */
-enum inv_mpu_scan {
-	INV_MPU_SCAN_QUAT_R = 0,
-	INV_MPU_SCAN_QUAT_X,
-	INV_MPU_SCAN_QUAT_Y,
-	INV_MPU_SCAN_QUAT_Z,
-	INV_MPU_SCAN_ACCEL_X,
-	INV_MPU_SCAN_ACCEL_Y,
-	INV_MPU_SCAN_ACCEL_Z,
-	INV_MPU_SCAN_GYRO_X,
-	INV_MPU_SCAN_GYRO_Y,
-	INV_MPU_SCAN_GYRO_Z,
-	INV_MPU_SCAN_MAGN_X,
-	INV_MPU_SCAN_MAGN_Y,
-	INV_MPU_SCAN_MAGN_Z,
-	INV_MPU_SCAN_TIMESTAMP,
-};
-
-enum inv_filter_e {
-	INV_FILTER_256HZ_NOLPF2 = 0,
-	INV_FILTER_188HZ,
-	INV_FILTER_98HZ,
-	INV_FILTER_42HZ,
-	INV_FILTER_20HZ,
-	INV_FILTER_10HZ,
-	INV_FILTER_5HZ,
-	INV_FILTER_2100HZ_NOLPF,
-	NUM_FILTER
-};
-
-enum inv_slave_mode {
-	INV_MODE_SUSPEND,
-	INV_MODE_NORMAL,
-};
-
-/*==== MPU6050B1 MEMORY ====*/
-enum MPU_MEMORY_BANKS {
-	MEM_RAM_BANK_0 = 0,
-	MEM_RAM_BANK_1,
-	MEM_RAM_BANK_2,
-	MEM_RAM_BANK_3,
-	MEM_RAM_BANK_4,
-	MEM_RAM_BANK_5,
-	MEM_RAM_BANK_6,
-	MEM_RAM_BANK_7,
-	MEM_RAM_BANK_8,
-	MEM_RAM_BANK_9,
-	MEM_RAM_BANK_10,
-	MEM_RAM_BANK_11,
-	MPU_MEM_NUM_RAM_BANKS,
-	MPU_MEM_OTP_BANK_0 = 16
-};
-
-/* IIO attribute address */
-enum MPU_IIO_ATTR_ADDR {
-	ATTR_DMP_GYRO_X_DMP_BIAS,
-	ATTR_DMP_GYRO_Y_DMP_BIAS,
-	ATTR_DMP_GYRO_Z_DMP_BIAS,
-	ATTR_DMP_ACCEL_X_DMP_BIAS,
-	ATTR_DMP_ACCEL_Y_DMP_BIAS,
-	ATTR_DMP_ACCEL_Z_DMP_BIAS,
-	ATTR_DMP_PED_INT_ON,
-	ATTR_DMP_PED_STEP_THRESH,
-	ATTR_DMP_PED_INT_THRESH,
-	ATTR_DMP_PED_ON,
-	ATTR_DMP_SMD_ENABLE,
-	ATTR_DMP_SMD_THLD,
-	ATTR_DMP_SMD_DELAY_THLD,
-	ATTR_DMP_SMD_DELAY_THLD2,
-	ATTR_DMP_PEDOMETER_STEPS,
-	ATTR_DMP_PEDOMETER_TIME,
-	ATTR_DMP_PEDOMETER_COUNTER,
-	ATTR_DMP_TAP_ON,
-	ATTR_DMP_TAP_THRESHOLD,
-	ATTR_DMP_TAP_MIN_COUNT,
-	ATTR_DMP_TAP_TIME,
-	ATTR_DMP_DISPLAY_ORIENTATION_ON,
-/* *****above this line, are DMP features, power needs on/off */
-/* *****below this line, are DMP features, no power needed */
-	ATTR_DMP_ON,
-	ATTR_DMP_INT_ON,
-	ATTR_DMP_EVENT_INT_ON,
-	ATTR_DMP_STEP_INDICATOR_ON,
-	ATTR_DMP_BATCHMODE_TIMEOUT,
-	ATTR_DMP_BATCHMODE_WAKE_FIFO_FULL,
-	ATTR_DMP_SIX_Q_ON,
-	ATTR_DMP_SIX_Q_RATE,
-	ATTR_DMP_LPQ_ON,
-	ATTR_DMP_LPQ_RATE,
-	ATTR_DMP_PED_Q_ON,
-	ATTR_DMP_PED_Q_RATE,
-	ATTR_DMP_STEP_DETECTOR_ON,
-	ATTR_DMP_STEP_DETECTOR_RATE,
-/*  *****above this line, it is all DMP related features */
-/*  *****below this line, it is all non-DMP related features */
-	ATTR_GYRO_SCALE,
-	ATTR_ACCEL_SCALE,
-	ATTR_COMPASS_SCALE,
-	ATTR_GYRO_X_OFFSET,
-	ATTR_GYRO_Y_OFFSET,
-	ATTR_GYRO_Z_OFFSET,
-	ATTR_ACCEL_X_OFFSET,
-	ATTR_ACCEL_Y_OFFSET,
-	ATTR_ACCEL_Z_OFFSET,
-	ATTR_MOTION_LPA_ON,
-	ATTR_MOTION_LPA_FREQ,
-	ATTR_MOTION_LPA_THRESHOLD,
-/*  *****above this line, it is non-DMP, power needs on/off */
-/*  *****below this line, it is non-DMP, no needs to on/off power */
-	ATTR_SELF_TEST_SAMPLES,
-	ATTR_SELF_TEST_THRESHOLD,
-	ATTR_GYRO_ENABLE,
-	ATTR_GYRO_FIFO_ENABLE,
-	ATTR_GYRO_RATE,
-	ATTR_ACCEL_ENABLE,
-	ATTR_ACCEL_FIFO_ENABLE,
-	ATTR_ACCEL_RATE,
-	ATTR_COMPASS_ENABLE,
-	ATTR_COMPASS_RATE,
-	ATTR_PRESSURE_ENABLE,
-	ATTR_PRESSURE_RATE,
-	ATTR_POWER_STATE, /* this is fake sysfs for compatibility */
-	ATTR_FIRMWARE_LOADED,
-	ATTR_SAMPLING_FREQ,
-/*  *****below this line, it is attributes only has show methods */
-	ATTR_SELF_TEST, /* this has show-only methods needs power on/off */
-	ATTR_GYRO_X_CALIBBIAS,
-	ATTR_GYRO_Y_CALIBBIAS,
-	ATTR_GYRO_Z_CALIBBIAS,
-	ATTR_ACCEL_X_CALIBBIAS,
-	ATTR_ACCEL_Y_CALIBBIAS,
-	ATTR_ACCEL_Z_CALIBBIAS,
-	ATTR_SELF_TEST_GYRO_SCALE,
-	ATTR_SELF_TEST_ACCEL_SCALE,
-	ATTR_GYRO_MATRIX,
-	ATTR_ACCEL_MATRIX,
-	ATTR_COMPASS_MATRIX,
-	ATTR_SECONDARY_NAME,
-#ifdef CONFIG_INV_TESTING
-	ATTR_COMPASS_SENS,
-	ATTR_I2C_COUNTERS,
-	ATTR_REG_WRITE,
-	ATTR_DEBUG_SMD_ENABLE_TESTP1,
-	ATTR_DEBUG_SMD_ENABLE_TESTP2,
-	ATTR_DEBUG_SMD_EXE_STATE,
-	ATTR_DEBUG_SMD_DELAY_CNTR,
-	ATTR_DEBUG_GYRO_COUNTER,
-	ATTR_DEBUG_ACCEL_COUNTER,
-	ATTR_DEBUG_COMPASS_COUNTER,
-	ATTR_DEBUG_PRESSURE_COUNTER,
-	ATTR_DEBUG_LPQ_COUNTER,
-	ATTR_DEBUG_SIXQ_COUNTER,
-	ATTR_DEBUG_PEDQ_COUNTER,
-#endif
-};
-
-enum inv_accel_fs_e {
-	INV_FS_02G = 0,
-	INV_FS_04G,
-	INV_FS_08G,
-	INV_FS_16G,
-	NUM_ACCEL_FSR
-};
-
-enum inv_fsr_e {
-	INV_FSR_250DPS = 0,
-	INV_FSR_500DPS,
-	INV_FSR_1000DPS,
-	INV_FSR_2000DPS,
-	NUM_FSR
-};
-
-enum inv_clock_sel_e {
-	INV_CLK_INTERNAL = 0,
-	INV_CLK_PLL,
-	NUM_CLK
-};
-
-ssize_t inv_dmp_firmware_write(struct file *fp, struct kobject *kobj,
-	struct bin_attribute *attr, char *buf, loff_t pos, size_t size);
-ssize_t inv_dmp_firmware_read(struct file *filp,
-				struct kobject *kobj,
-				struct bin_attribute *bin_attr,
-				char *buf, loff_t off, size_t count);
-ssize_t inv_six_q_write(struct file *fp, struct kobject *kobj,
-	struct bin_attribute *attr, char *buf, loff_t pos, size_t size);
-
-int inv_mpu_configure_ring(struct iio_dev *indio_dev);
-int inv_mpu_probe_trigger(struct iio_dev *indio_dev);
-void inv_mpu_unconfigure_ring(struct iio_dev *indio_dev);
-void inv_mpu_remove_trigger(struct iio_dev *indio_dev);
-int inv_init_config_mpu3050(struct iio_dev *indio_dev);
-int inv_get_silicon_rev_mpu6050(struct inv_mpu_state *st);
-int inv_get_silicon_rev_mpu6500(struct inv_mpu_state *st);
-int set_3050_bypass(struct inv_mpu_state *st, bool enable);
-int inv_register_mpu3050_slave(struct inv_mpu_state *st);
-void inv_setup_reg_mpu3050(struct inv_reg_map_s *reg);
-int inv_switch_3050_gyro_engine(struct inv_mpu_state *st, bool en);
-int inv_switch_3050_accel_engine(struct inv_mpu_state *st, bool en);
-int set_power_mpu3050(struct inv_mpu_state *st, bool power_on);
-int inv_set_interrupt_on_gesture_event(struct inv_mpu_state *st, bool on);
-int inv_set_display_orient_interrupt_dmp(struct inv_mpu_state *st, bool on);
-u16 inv_dmp_get_address(u16 key);
-int inv_q30_mult(int a, int b);
-int inv_set_tap_threshold_dmp(struct inv_mpu_state *st, u16 threshold);
-int inv_write_2bytes(struct inv_mpu_state *st, int k, int data);
-int inv_set_min_taps_dmp(struct inv_mpu_state *st, u16 min_taps);
-int  inv_set_tap_time_dmp(struct inv_mpu_state *st, u16 time);
-int inv_enable_tap_dmp(struct inv_mpu_state *st, bool on);
-int inv_i2c_read_base(struct inv_mpu_state *st, u16 i2c_addr,
-	u8 reg, u16 length, u8 *data);
-int inv_i2c_single_write_base(struct inv_mpu_state *st,
-	u16 i2c_addr, u8 reg, u8 data);
-int inv_hw_self_test(struct inv_mpu_state *st);
-s64 get_time_ns(void);
-int write_be32_key_to_mem(struct inv_mpu_state *st,
-					u32 data, int key);
-int inv_set_accel_bias_dmp(struct inv_mpu_state *st);
-int inv_mpu_setup_compass_slave(struct inv_mpu_state *st);
-int inv_mpu_setup_pressure_slave(struct inv_mpu_state *st);
-int mpu_memory_write(struct inv_mpu_state *st, u8 mpu_addr, u16 mem_addr,
-		     u32 len, u8 const *data);
-int mpu_memory_read(struct inv_mpu_state *st, u8 mpu_addr, u16 mem_addr,
-		    u32 len, u8 *data);
-int mpu_memory_write_unaligned(struct inv_mpu_state *st, u16 key, int len,
-							u8 const *d);
-int inv_quaternion_on(struct inv_mpu_state *st,
-				 struct iio_buffer *ring, bool en);
-int inv_enable_pedometer_interrupt(struct inv_mpu_state *st, bool en);
-int inv_read_pedometer_counter(struct inv_mpu_state *st);
-int inv_enable_pedometer(struct inv_mpu_state *st, bool en);
-int inv_get_pedometer_steps(struct inv_mpu_state *st, u32 *steps);
-int inv_get_pedometer_time(struct inv_mpu_state *st, u32 *time);
-int inv_reset_fifo(struct iio_dev *indio_dev);
-int inv_reset_offset_reg(struct inv_mpu_state *st, bool en);
-int inv_batchmode_setup(struct inv_mpu_state *st);
-void inv_init_sensor_struct(struct inv_mpu_state *st);
-int inv_read_time_and_ticks(struct inv_mpu_state *st, bool resume);
-int inv_flush_batch_data(struct iio_dev *indio_dev, bool *has_data);
-int set_inv_enable(struct iio_dev *indio_dev, bool enable);
-/* used to print i2c data using pr_debug */
-char *wr_pr_debug_begin(u8 const *data, u32 len, char *string);
-char *wr_pr_debug_end(char *string);
-
-#define mem_w(a, b, c) \
-	mpu_memory_write(st, st->i2c_addr, a, b, c)
-#define mem_w_key(key, b, c) mpu_memory_write_unaligned(st, key, b, c)
-#define inv_i2c_read(st, reg, len, data) \
-	inv_i2c_read_base(st, st->i2c_addr, reg, len, data)
-#define inv_i2c_single_write(st, reg, data) \
-	inv_i2c_single_write_base(st, st->i2c_addr, reg, data)
-#define inv_secondary_read(reg, len, data) \
-	inv_i2c_read_base(st, st->plat_data.secondary_i2c_addr, reg, len, data)
-#define inv_secondary_write(reg, data) \
-	inv_i2c_single_write_base(st, st->plat_data.secondary_i2c_addr, \
-		reg, data)
-#define inv_aux_read(reg, len, data) \
-	inv_i2c_read_base(st, st->plat_data.aux_i2c_addr, reg, len, data)
-#define inv_aux_write(reg, data) \
-	inv_i2c_single_write_base(st, st->plat_data.aux_i2c_addr, \
-		reg, data)
-
-#endif  /* #ifndef _INV_MPU_IIO_H_ */
-