Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "A bunch of intel and radeon fixes, along with two fixes to TTM code.

  The correct fix for the Intel ironlake failure is in this, and should
  make things more stable, along with some misc radeon fixes."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  ttm: on move memory failure don't leave a node dangling
  ttm: don't destroy old mm_node on memcpy failure
  Revert "drm/radeon: do not move bo to different placement at each cs"
  drm/i915: fix FORCEWAKE posting reads
  drm/i915: Invalidate the relocation presumed_offsets along the slow path
  drm/i915/eDP: do not write power sequence registers for ghost eDP
  drm/radeon: improve semaphore debugging on lockup
  drm/radeon: allow FP16 color clear registers on r500
  drm/radeon: clear reset flags if engines are idle
  drm/i915: Record DERRMR, FORCEWAKE and RING_CTL in error-state

1 files changed, 32 insertions, 15 deletions

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 1b63d55318a..fb3715b4b09 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2579,7 +2579,8 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect
 
 static void
 intel_dp_init_panel_power_sequencer(struct drm_device *dev,
-				    struct intel_dp *intel_dp)
+				    struct intel_dp *intel_dp,
+				    struct edp_power_seq *out)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct edp_power_seq cur, vbt, spec, final;
@@ -2650,16 +2651,35 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
 	intel_dp->panel_power_cycle_delay = get_delay(t11_t12);
 #undef get_delay
 
+	DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n",
+		      intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay,
+		      intel_dp->panel_power_cycle_delay);
+
+	DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
+		      intel_dp->backlight_on_delay, intel_dp->backlight_off_delay);
+
+	if (out)
+		*out = final;
+}
+
+static void
+intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
+					      struct intel_dp *intel_dp,
+					      struct edp_power_seq *seq)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp_on, pp_off, pp_div;
+
 	/* And finally store the new values in the power sequencer. */
-	pp_on = (final.t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) |
-		(final.t8 << PANEL_LIGHT_ON_DELAY_SHIFT);
-	pp_off = (final.t9 << PANEL_LIGHT_OFF_DELAY_SHIFT) |
-		 (final.t10 << PANEL_POWER_DOWN_DELAY_SHIFT);
+	pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) |
+		(seq->t8 << PANEL_LIGHT_ON_DELAY_SHIFT);
+	pp_off = (seq->t9 << PANEL_LIGHT_OFF_DELAY_SHIFT) |
+		 (seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT);
 	/* Compute the divisor for the pp clock, simply match the Bspec
 	 * formula. */
 	pp_div = ((100 * intel_pch_rawclk(dev))/2 - 1)
 			<< PP_REFERENCE_DIVIDER_SHIFT;
-	pp_div |= (DIV_ROUND_UP(final.t11_t12, 1000)
+	pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000)
 			<< PANEL_POWER_CYCLE_DELAY_SHIFT);
 
 	/* Haswell doesn't have any port selection bits for the panel
@@ -2675,14 +2695,6 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
 	I915_WRITE(PCH_PP_OFF_DELAYS, pp_off);
 	I915_WRITE(PCH_PP_DIVISOR, pp_div);
 
-
-	DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n",
-		      intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay,
-		      intel_dp->panel_power_cycle_delay);
-
-	DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
-		      intel_dp->backlight_on_delay, intel_dp->backlight_off_delay);
-
 	DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
 		      I915_READ(PCH_PP_ON_DELAYS),
 		      I915_READ(PCH_PP_OFF_DELAYS),
@@ -2699,6 +2711,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	struct drm_device *dev = intel_encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_display_mode *fixed_mode = NULL;
+	struct edp_power_seq power_seq = { 0 };
 	enum port port = intel_dig_port->port;
 	const char *name = NULL;
 	int type;
@@ -2771,7 +2784,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	}
 
 	if (is_edp(intel_dp))
-		intel_dp_init_panel_power_sequencer(dev, intel_dp);
+		intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq);
 
 	intel_dp_i2c_init(intel_dp, intel_connector, name);
 
@@ -2798,6 +2811,10 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 			return;
 		}
 
+		/* We now know it's not a ghost, init power sequence regs. */
+		intel_dp_init_panel_power_sequencer_registers(dev, intel_dp,
+							      &power_seq);
+
 		ironlake_edp_panel_vdd_on(intel_dp);
 		edid = drm_get_edid(connector, &intel_dp->adapter);
 		if (edid) {