Merge tag 'vt8500/pinctrl' of git://server.prisktech.co.nz/git/linuxwmt into next/drivers

From Tony Prisk <linux@prisktech.co.nz>:

arm: vt8500: Add pinctrl driver for arch-vt8500

This series adds support for the pinctrl/gpio module on all arch-vt8500
supported SoCs.

As part of the review process, some tidy up is also done to
drivers/of/base.c to remove some code that is being constantly duplicated.

Also, a patch for the bcm2835 pinctrl driver is included to take advantage
of the new of/base.c code.

* tag 'vt8500/pinctrl' of git://server.prisktech.co.nz/git/linuxwmt: (606 commits)
  pinctrl: bcm2835: make use of of_property_read_u32_index()
  gpio: vt8500: Remove arch-vt8500 gpio driver
  arm: vt8500: Remove gpio devicetree nodes
  arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver
  pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500
  arm: vt8500: Increase available GPIOs on arch-vt8500
  of: Remove duplicated code for validating property and value
  of: Add support for reading a u32 from a multi-value property.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 26 insertions, 15 deletions

diff --git a/arch/sparc/kernel/leon_pci_grpci2.c b/arch/sparc/kernel/leon_pci_grpci2.c
index fc4320886a3..4d1487138d2 100644
--- a/arch/sparc/kernel/leon_pci_grpci2.c
+++ b/arch/sparc/kernel/leon_pci_grpci2.c
@@ -186,6 +186,8 @@ struct grpci2_cap_first {
 #define CAP9_IOMAP_OFS 0x20
 #define CAP9_BARSIZE_OFS 0x24
 
+#define TGT 256
+
 struct grpci2_priv {
 	struct leon_pci_info	info; /* must be on top of this structure */
 	struct grpci2_regs	*regs;
@@ -237,8 +239,12 @@ static int grpci2_cfg_r32(struct grpci2_priv *priv, unsigned int bus,
 	if (where & 0x3)
 		return -EINVAL;
 
-	if (bus == 0 && PCI_SLOT(devfn) != 0)
-		devfn += (0x8 * 6);
+	if (bus == 0) {
+		devfn += (0x8 * 6); /* start at AD16=Device0 */
+	} else if (bus == TGT) {
+		bus = 0;
+		devfn = 0; /* special case: bridge controller itself */
+	}
 
 	/* Select bus */
 	spin_lock_irqsave(&grpci2_dev_lock, flags);
@@ -303,8 +309,12 @@ static int grpci2_cfg_w32(struct grpci2_priv *priv, unsigned int bus,
 	if (where & 0x3)
 		return -EINVAL;
 
-	if (bus == 0 && PCI_SLOT(devfn) != 0)
-		devfn += (0x8 * 6);
+	if (bus == 0) {
+		devfn += (0x8 * 6); /* start at AD16=Device0 */
+	} else if (bus == TGT) {
+		bus = 0;
+		devfn = 0; /* special case: bridge controller itself */
+	}
 
 	/* Select bus */
 	spin_lock_irqsave(&grpci2_dev_lock, flags);
@@ -368,7 +378,7 @@ static int grpci2_read_config(struct pci_bus *bus, unsigned int devfn,
 	unsigned int busno = bus->number;
 	int ret;
 
-	if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0)) {
+	if (PCI_SLOT(devfn) > 15 || busno > 255) {
 		*val = ~0;
 		return 0;
 	}
@@ -406,7 +416,7 @@ static int grpci2_write_config(struct pci_bus *bus, unsigned int devfn,
 	struct grpci2_priv *priv = grpci2priv;
 	unsigned int busno = bus->number;
 
-	if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0))
+	if (PCI_SLOT(devfn) > 15 || busno > 255)
 		return 0;
 
 #ifdef GRPCI2_DEBUG_CFGACCESS
@@ -578,15 +588,15 @@ void grpci2_hw_init(struct grpci2_priv *priv)
 		REGSTORE(regs->ahbmst_map[i], priv->pci_area);
 
 	/* Get the GRPCI2 Host PCI ID */
-	grpci2_cfg_r32(priv, 0, 0, PCI_VENDOR_ID, &priv->pciid);
+	grpci2_cfg_r32(priv, TGT, 0, PCI_VENDOR_ID, &priv->pciid);
 
 	/* Get address to first (always defined) capability structure */
-	grpci2_cfg_r8(priv, 0, 0, PCI_CAPABILITY_LIST, &capptr);
+	grpci2_cfg_r8(priv, TGT, 0, PCI_CAPABILITY_LIST, &capptr);
 
 	/* Enable/Disable Byte twisting */
-	grpci2_cfg_r32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, &io_map);
+	grpci2_cfg_r32(priv, TGT, 0, capptr+CAP9_IOMAP_OFS, &io_map);
 	io_map = (io_map & ~0x1) | (priv->bt_enabled ? 1 : 0);
-	grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, io_map);
+	grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_IOMAP_OFS, io_map);
 
 	/* Setup the Host's PCI Target BARs for other peripherals to access,
 	 * and do DMA to the host's memory. The target BARs can be sized and
@@ -617,17 +627,18 @@ void grpci2_hw_init(struct grpci2_priv *priv)
 				pciadr = 0;
 			}
 		}
-		grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BARSIZE_OFS+i*4, bar_sz);
-		grpci2_cfg_w32(priv, 0, 0, PCI_BASE_ADDRESS_0+i*4, pciadr);
-		grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr);
+		grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_BARSIZE_OFS+i*4,
+				bar_sz);
+		grpci2_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_0+i*4, pciadr);
+		grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr);
 		printk(KERN_INFO "        TGT BAR[%d]: 0x%08x (PCI)-> 0x%08x\n",
 			i, pciadr, ahbadr);
 	}
 
 	/* set as bus master and enable pci memory responses */
-	grpci2_cfg_r32(priv, 0, 0, PCI_COMMAND, &data);
+	grpci2_cfg_r32(priv, TGT, 0, PCI_COMMAND, &data);
 	data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-	grpci2_cfg_w32(priv, 0, 0, PCI_COMMAND, data);
+	grpci2_cfg_w32(priv, TGT, 0, PCI_COMMAND, data);
 
 	/* Enable Error respone (CPU-TRAP) on illegal memory access. */
 	REGSTORE(regs->ctrl, CTRL_ER | CTRL_PE);