Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:

 o Add basic support for the Mediatek/Ralink Wireless SoC family.

 o The Qualcomm Atheros platform is extended by support for the new
   QCA955X SoC series as well as a bunch of patches that get the code
   ready for OF support.

 o Lantiq and BCM47XX platform have a few improvements and bug fixes.

 o MIPS has sent a few patches that get the kernel ready for the
   upcoming microMIPS support.

 o The rest of the series is made up of small bug fixes and cleanups
   that relate to various parts of the MIPS code.  The biggy in there is
   a whitespace cleanup.  After I was sent another set of whitespace
   cleanup patches I decided it was the time to clean the whitespace
   "issues" for once and and that touches many files below arch/mips/.

Fix up silly conflicts, mostly due to whitespace cleanups.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits)
  MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h
  MIPS: remove broken conditional inside vpe loader code
  MIPS: SMTC: fix implicit declaration of set_vi_handler
  MIPS: early_printk: drop __init annotations
  MIPS: Probe for and report hardware virtualization support.
  MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
  MIPS: ath79: add USB controller registration code for the QCA955X SoCs
  MIPS: ath79: add PCI controller registration code for the QCA955X SoCs
  MIPS: ath79: add WMAC registration code for the QCA955X SoCs
  MIPS: ath79: register UART for the QCA955X SoCs
  MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}
  MIPS: ath79: add GPIO setup code for the QCA955X SoCs
  MIPS: ath79: add IRQ handling code for the QCA955X SoCs
  MIPS: ath79: add clock setup code for the QCA955X SoCs
  MIPS: ath79: add SoC detection code for the QCA955X SoCs
  MIPS: ath79: add early printk support for the QCA955X SoCs
  MIPS: ath79: fix WMAC IRQ resource assignment
  mips: reserve elfcorehdr
  mips: Make sure kernel memory is in iomem
  MIPS: ath79: use dynamically allocated USB platform devices
  ...

1 files changed, 20 insertions, 20 deletions

diff --git a/arch/mips/include/asm/octeon/cvmx-mdio.h b/arch/mips/include/asm/octeon/cvmx-mdio.h
index 6f0cd182cec..9f6a4f32a83 100644
--- a/arch/mips/include/asm/octeon/cvmx-mdio.h
+++ b/arch/mips/include/asm/octeon/cvmx-mdio.h
@@ -246,21 +246,21 @@ typedef union {
 } cvmx_mdio_phy_reg_mmd_address_data_t;
 
 /* Operating request encodings. */
-#define MDIO_CLAUSE_22_WRITE    0
-#define MDIO_CLAUSE_22_READ     1
+#define MDIO_CLAUSE_22_WRITE	0
+#define MDIO_CLAUSE_22_READ	1
 
-#define MDIO_CLAUSE_45_ADDRESS  0
-#define MDIO_CLAUSE_45_WRITE    1
+#define MDIO_CLAUSE_45_ADDRESS	0
+#define MDIO_CLAUSE_45_WRITE	1
 #define MDIO_CLAUSE_45_READ_INC 2
-#define MDIO_CLAUSE_45_READ     3
+#define MDIO_CLAUSE_45_READ	3
 
 /* MMD identifiers, mostly for accessing devices within XENPAK modules. */
-#define CVMX_MMD_DEVICE_PMA_PMD      1
-#define CVMX_MMD_DEVICE_WIS          2
-#define CVMX_MMD_DEVICE_PCS          3
-#define CVMX_MMD_DEVICE_PHY_XS       4
-#define CVMX_MMD_DEVICE_DTS_XS       5
-#define CVMX_MMD_DEVICE_TC           6
+#define CVMX_MMD_DEVICE_PMA_PMD	     1
+#define CVMX_MMD_DEVICE_WIS	     2
+#define CVMX_MMD_DEVICE_PCS	     3
+#define CVMX_MMD_DEVICE_PHY_XS	     4
+#define CVMX_MMD_DEVICE_DTS_XS	     5
+#define CVMX_MMD_DEVICE_TC	     6
 #define CVMX_MMD_DEVICE_CL22_EXT     29
 #define CVMX_MMD_DEVICE_VENDOR_1     30
 #define CVMX_MMD_DEVICE_VENDOR_2     31
@@ -291,7 +291,7 @@ static inline void __cvmx_mdio_set_clause22_mode(int bus_id)
  * registers controlling auto negotiation.
  *
  * @bus_id:   MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
- *                 support multiple busses.
+ *		   support multiple busses.
  * @phy_id:   The MII phy id
  * @location: Register location to read
  *
@@ -328,13 +328,13 @@ static inline int cvmx_mdio_read(int bus_id, int phy_id, int location)
  * registers controlling auto negotiation.
  *
  * @bus_id:   MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
- *                 support multiple busses.
+ *		   support multiple busses.
  * @phy_id:   The MII phy id
  * @location: Register location to write
  * @val:      Value to write
  *
  * Returns -1 on error
- *         0 on success
+ *	   0 on success
  */
 static inline int cvmx_mdio_write(int bus_id, int phy_id, int location, int val)
 {
@@ -370,7 +370,7 @@ static inline int cvmx_mdio_write(int bus_id, int phy_id, int location, int val)
  * read PHY registers controlling auto negotiation.
  *
  * @bus_id:   MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
- *                 support multiple busses.
+ *		   support multiple busses.
  * @phy_id:   The MII phy id
  * @device:   MDIO Managable Device (MMD) id
  * @location: Register location to read
@@ -407,7 +407,7 @@ static inline int cvmx_mdio_45_read(int bus_id, int phy_id, int device,
 	} while (smi_wr.s.pending && --timeout);
 	if (timeout <= 0) {
 		cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
-			     "device %2d register %2d   TIME OUT(address)\n",
+			     "device %2d register %2d	TIME OUT(address)\n",
 		     bus_id, phy_id, device, location);
 		return -1;
 	}
@@ -425,7 +425,7 @@ static inline int cvmx_mdio_45_read(int bus_id, int phy_id, int device,
 
 	if (timeout <= 0) {
 		cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
-			     "device %2d register %2d   TIME OUT(data)\n",
+			     "device %2d register %2d	TIME OUT(data)\n",
 		     bus_id, phy_id, device, location);
 		return -1;
 	}
@@ -434,7 +434,7 @@ static inline int cvmx_mdio_45_read(int bus_id, int phy_id, int device,
 		return smi_rd.s.dat;
 	else {
 		cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
-			     "device %2d register %2d   INVALID READ\n",
+			     "device %2d register %2d	INVALID READ\n",
 		     bus_id, phy_id, device, location);
 		return -1;
 	}
@@ -445,14 +445,14 @@ static inline int cvmx_mdio_45_read(int bus_id, int phy_id, int device,
  * write PHY registers controlling auto negotiation.
  *
  * @bus_id:   MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
- *                 support multiple busses.
+ *		   support multiple busses.
  * @phy_id:   The MII phy id
  * @device:   MDIO Managable Device (MMD) id
  * @location: Register location to write
  * @val:      Value to write
  *
  * Returns -1 on error
- *         0 on success
+ *	   0 on success
  */
 static inline int cvmx_mdio_45_write(int bus_id, int phy_id, int device,
 				     int location, int val)