diff options
| author | mattis fjallstrom <mattis@acm.org> | 2016-01-11 19:43:00 -0800 |
|---|---|---|
| committer | mattis fjallstrom <mattis@acm.org> | 2016-01-11 19:43:00 -0800 |
| commit | adacad29a479dff5c4959e11f59ed2623faa455a (patch) | |
| tree | e82e7daff2a96945997f2e249925ab37c2594001 /arch/arm | |
| parent | 9177138cf02829830c8d0003815bcff3c8c6b866 (diff) | |
| download | olio-linux-3.10-adacad29a479dff5c4959e11f59ed2623faa455a.tar.xz olio-linux-3.10-adacad29a479dff5c4959e11f59ed2623faa455a.zip | |
Enable/disable fuel gauge wake up depending on charge state. This turns off interrupts from the fuel gauge while charging.
Change-Id: I6a004c9d6ae9f47eae69387f27534f63c77ebfcf
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/boot/dts/omap3_h1.dts | 26 |
1 files changed, 13 insertions, 13 deletions
diff --git a/arch/arm/boot/dts/omap3_h1.dts b/arch/arm/boot/dts/omap3_h1.dts index ee19b23f0cc..d162d465c8b 100644 --- a/arch/arm/boot/dts/omap3_h1.dts +++ b/arch/arm/boot/dts/omap3_h1.dts @@ -68,7 +68,7 @@ * for a gpio IRQ (banks numbered 1 to 6) * irq = 16 + 96 + (gpio_bank - 1) * 32 + GPIO no. */ - compatible = "ti,pad-wkup"; + compatible = "ti,pad-wkup"; /* Map the pad offset (off) to an interrupt (IRQ). */ /* if handle is 1, an irq will be generated based on */ @@ -83,10 +83,10 @@ /* off IRQ handle */ ti,pad_irq = <0x150 88 1>, /* 72 + 16, uart1 - BT input */ - <0x9f6 143 1>, /* mpu6515 irq pin - is this offset correct? */ - <0x9ea 122 1>, /* bq27400 chg irq8 */ - <0x9f4 123 1>, /* BT host wake */ - <0x1b0 23 1>; /* sys_nirq */ + <0x9f6 143 1>, /* mpu6515 irq pin - is this offset correct? */ + /* <0x9ea 122 1>, */ /* bq27400 chg irq8 - needed here? */ + <0x9f4 123 1>, /* BT host wake */ + <0x1b0 23 1>; /* sys_nirq */ }; sound { @@ -215,14 +215,14 @@ >; }; - dev_pins: pinmux_pv_pins { - pinctrl-single,pins = < - 0x5b2 0x204 /* USB control, ETK_D3, MODE4 | OUTPUT */ - /* 0x1a2 0x104 */ /* ALS interrupt, input, GPIO */ - 0x086 0x004 /* DRV2605 vibrator, output, GPIO */ - /* 0x938 0x104 */ /* Battery state, input, GPIO */ - >; - }; +dev_pins: pinmux_pv_pins { + pinctrl-single,pins = < + 0x5b2 0x204 /* USB control, ETK_D3, MODE4 | OUTPUT */ + /* 0x1a2 0x104 */ /* ALS interrupt, input, GPIO */ + 0x086 0x004 /* DRV2605 vibrator, output, GPIO */ + /* 0x938 0x104 */ /* Battery state, input, GPIO */ + >; + }; /* i2c1_pins: pinmux_i2c1_pins { |