diff options
| author | mattis fjallstrom <mattis@acm.org> | 2015-08-03 14:25:22 -0700 |
|---|---|---|
| committer | mattis fjallstrom <mattis@acm.org> | 2015-08-03 14:25:22 -0700 |
| commit | e419bb863c5df364265e5acab5f35eb7dc2d90db (patch) | |
| tree | 4867b612df3074722a11f16bc151bcec37ae81e5 /arch/arm/boot/dts/omap3_h1.dts | |
| parent | 920ea5534e560d7780ac927f13b94ac547f2e5ad (diff) | |
| download | olio-linux-3.10-e419bb863c5df364265e5acab5f35eb7dc2d90db.tar.xz olio-linux-3.10-e419bb863c5df364265e5acab5f35eb7dc2d90db.zip | |
Set UART_PORT to 0, modified pin muxing
Change-Id: Ie4d8b4aed4d2b50c9b95b3de89fdf68343580b07
Diffstat (limited to 'arch/arm/boot/dts/omap3_h1.dts')
| -rw-r--r-- | arch/arm/boot/dts/omap3_h1.dts | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/arch/arm/boot/dts/omap3_h1.dts b/arch/arm/boot/dts/omap3_h1.dts index 5f200367193..090cd6f4362 100644 --- a/arch/arm/boot/dts/omap3_h1.dts +++ b/arch/arm/boot/dts/omap3_h1.dts @@ -75,7 +75,7 @@ /* listed below will be reported as the wakeup reason */ /* */ /* off IRQ handle */ - ti,pad_irq = <0x152 88 1>, /* uart1 - BT input */ + ti,pad_irq = <0x150 88 1>, /* uart1 - BT input */ <0x9f6 143 1>, /* mpu6515 irq pin - is this offset correct? */ <0x9f4 123 1>, /* BT host wake */ <0x1b0 23 1>; /* sys_nirq */ @@ -178,11 +178,6 @@ 0x1a8 0x004 /* CONTROL_PADCONF_MCSPI2_SIMO, (IDIS | PI | M4 ) */ 0x1aa 0x004 /* CONTROL_PADCONF_MCSPI2_SOMI, (IDIS | PI | M4 ) */ - /* BT_WAKE_GPIO - for waking up BT */ - /* OMAP_OFF_ENABLE, OMAP_OFF_PULL_EN, OMAP_OFF_OUTENABLE for sleep modes. */ - /* Now set this to regular old output */ - 0x0da 0x004 /* 0x1604 */ /* DSS_DATA23, (IDIS | PI | M4 ) */ - /* UART3 pins */ 0x16e 0x100 /* RX, input, off wake up */ 0x170 0x000 /* TX, output */ @@ -197,10 +192,15 @@ /* 0x9f6 0x4104 */ /* JTAG_EMU1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT | OMAP_PIN_OFF_WAKEUPENABLE */ - 0x14c 0x000 /* UART1, BT, TX */ - 0x14e 0x000 /* UART1, BT, RTS */ - 0x150 0x4100 /* UART1, BT, CTS */ - 0x152 0x100 /* UART1, BT, RX */ + 0x14c 0x000 /* UART1, BT, TX */ + 0x14e 0x000 /* UART1, BT, RTS - E00 = output high off */ + 0x150 0x4100 /* UART1, BT, CTS */ + 0x152 0x100 /* UART1, BT, RX */ + + /* BT_WAKE_GPIO - for waking up BT */ + /* OMAP_OFF_ENABLE, OMAP_OFF_PULL_EN, OMAP_OFF_OUTENABLE for sleep modes. */ + /* Now set this to regular old output .. also off enable, output low. (0x600) */ + 0x0da 0x604 /* 0x1604 */ /* DSS_DATA23, (IDIS | PI | M4 ) */ >; }; |