From 86b116b1b1e165ca4840daefed36d2e3b8460173 Mon Sep 17 00:00:00 2001 From: Bartlomiej Sieka Date: Fri, 3 Aug 2007 12:08:16 +0200 Subject: cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family. Add the ability for modules from the Schindler cm5200 family to use a single U-Boot image: - rename cm1_qp1 to cm5200 - add run-time module detection - parametrize SDRAM configuration according to the module we are running on Few minor, board-specific fixes included in this patch: - better MAC address handling - updated default environment ('update' command uses +{filesize} now) - improved error messages in the auto-update code - allow booting U-Boot from RAM (CFG_RAMBOOT) Signed-off-by: Grzegorz Bernacki Signed-off-by: Piotr Kruszynski Signed-off-by: Bartlomiej Sieka --- board/cm5200/cm5200.c | 425 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 425 insertions(+) create mode 100644 board/cm5200/cm5200.c (limited to 'board/cm5200/cm5200.c') diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c new file mode 100644 index 000000000..6804e33c2 --- /dev/null +++ b/board/cm5200/cm5200.c @@ -0,0 +1,425 @@ +/* + * (C) Copyright 2003-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * (C) Copyright 2004-2005 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * Adapted to U-Boot 1.2 by: + * Bartlomiej Sieka : + * - HW ID readout from EEPROM + * - module detection + * Grzegorz Bernacki : + * - run-time SDRAM controller configuration + * - LIBFDT support + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_OF_LIBFDT +#include +#include +#include +#endif /* CONFIG_OF_LIBFDT */ + + +#include "cm5200.h" +#include "fwupdate.h" + +DECLARE_GLOBAL_DATA_PTR; + +static hw_id_t hw_id; + + +#ifndef CFG_RAMBOOT +/* + * Helper function to initialize SDRAM controller. + */ +static void sdram_start(int hi_addr, mem_conf_t *mem_conf) +{ + long hi_addr_bit = hi_addr ? 0x01000000 : 0; + + /* unlock mode register */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000000 | + hi_addr_bit; + + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000002 | + hi_addr_bit; + + /* auto refresh */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000004 | + hi_addr_bit; + + /* auto refresh, second time */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000004 | + hi_addr_bit; + + /* set mode register */ + *(vu_long *)MPC5XXX_SDRAM_MODE = mem_conf->mode; + + /* normal operation */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | hi_addr_bit; +} +#endif /* CFG_RAMBOOT */ + + +/* + * Retrieve memory configuration for a given module. board_type is the index + * in hw_id_list[] corresponding to the module we are executing on; we return + * SDRAM controller settings approprate for this module. + */ +static mem_conf_t* get_mem_config(int board_type) +{ + switch(board_type){ + case CM1_QA: + return memory_config[0]; + case CM11_QA: + case CMU1_QA: + return memory_config[1]; + default: + printf("ERROR: Unknown module, using a default SDRAM " + "configuration - things may not work!!!.\n"); + return memory_config[0]; + } +} + + +/* + * Initalize SDRAM - configure SDRAM controller, detect memory size. + */ +long int initdram(int board_type) +{ + ulong dramsize = 0; +#ifndef CFG_RAMBOOT + ulong test1, test2; + mem_conf_t *mem_conf; + + mem_conf = get_mem_config(board_type); + + /* configure SDRAM start/end for detection */ + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */ + + /* setup config registers */ + *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = mem_conf->config1; + *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = mem_conf->config2; + + sdram_start(0, mem_conf); + test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + sdram_start(1, mem_conf); + test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + if (test1 > test2) { + sdram_start(0, mem_conf); + dramsize = test1; + } else + dramsize = test2; + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) + dramsize = 0; + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) { + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + + __builtin_ffs(dramsize >> 20) - 1; + } else + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ +#else /* CFG_RAMBOOT */ + /* retrieve size of memory connected to SDRAM CS0 */ + dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; + if (dramsize >= 0x13) + dramsize = (1 << (dramsize - 0x13)) << 20; + else + dramsize = 0; +#endif /* !CFG_RAMBOOT */ + + /* + * On MPC5200B we need to set the special configuration delay in the + * DDR controller. Refer to chapter 8.7.5 SDelay--MBAR + 0x0190 of + * the MPC5200B User's Manual. + */ + *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04; + __asm__ volatile ("sync"); + + return dramsize; +} + + +/* + * Read module hardware identification data from the I2C EEPROM. + */ +static void read_hw_id(hw_id_t hw_id) +{ + int i; + for (i = 0; i < HW_ID_ELEM_COUNT; ++i) + if (i2c_read(CFG_I2C_EEPROM, + hw_id_format[i].offset, + 2, + (uchar *)&hw_id[i][0], + hw_id_format[i].length) != 0) + printf("ERROR: can't read HW ID from EEPROM\n"); +} + + +/* + * Identify module we are running on, set gd->board_type to the index in + * hw_id_list[] corresponding to the module identifed, or to + * CM5200_UNKNOWN_MODULE if we can't identify the module. + */ +static void identify_module(hw_id_t hw_id) +{ + int i, j, element; + char match; + gd->board_type = CM5200_UNKNOWN_MODULE; + for (i = 0; i < sizeof (hw_id_list) / sizeof (char **); ++i) { + match = 1; + for (j = 0; j < sizeof (hw_id_identify) / sizeof (int); ++j) { + element = hw_id_identify[j]; + if (strncmp(hw_id_list[i][element], + &hw_id[element][0], + hw_id_format[element].length) != 0) { + match = 0; + break; + } + } + if (match) { + gd->board_type = i; + break; + } + } +} + + +/* + * Compose string with module name. + * buf is assumed to have enough space, and be null-terminated. + */ +static void compose_module_name(hw_id_t hw_id, char *buf) +{ + char tmp[MODULE_NAME_MAXLEN]; + strncat(buf, &hw_id[PCB_NAME][0], hw_id_format[PCB_NAME].length); + strncat(buf, ".", 1); + strncat(buf, &hw_id[FORM][0], hw_id_format[FORM].length); + strncat(buf, &hw_id[VERSION][0], hw_id_format[VERSION].length); + strncat(buf, " (", 2); + strncat(buf, &hw_id[IDENTIFICATION_NUMBER][0], + hw_id_format[IDENTIFICATION_NUMBER].length); + sprintf(tmp, " / %u.%u)", + hw_id[MAJOR_SW_VERSION][0], + hw_id[MINOR_SW_VERSION][0]); + strcat(buf, tmp); +} + + +/* + * Compose string with hostname. + * buf is assumed to have enough space, and be null-terminated. + */ +static void compose_hostname(hw_id_t hw_id, char *buf) +{ + char *p; + strncat(buf, &hw_id[PCB_NAME][0], hw_id_format[PCB_NAME].length); + strncat(buf, "_", 1); + strncat(buf, &hw_id[FORM][0], hw_id_format[FORM].length); + strncat(buf, &hw_id[VERSION][0], hw_id_format[VERSION].length); + for (p = buf; *p; ++p) + *p = tolower(*p); + +} + + +#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) +/* + * Update 'model' and 'memory' properties in the blob according to the module + * that we are running on. + */ +static void ft_blob_update(void *blob, bd_t *bd) +{ + int len, ret, nodeoffset = 0; + char module_name[MODULE_NAME_MAXLEN] = {0}; + ulong memory_data[2] = {0}; + + compose_module_name(hw_id, module_name); + len = strlen(module_name) + 1; + + ret = fdt_setprop(blob, nodeoffset, "model", module_name, len); + if (ret < 0) + printf("ft_blob_update(): cannot set /model property err:%s\n", + fdt_strerror(ret)); + + memory_data[0] = cpu_to_be32(bd->bi_memstart); + memory_data[1] = cpu_to_be32(bd->bi_memsize); + + nodeoffset = fdt_find_node_by_path (blob, "/memory"); + if (nodeoffset >= 0) { + ret = fdt_setprop(blob, nodeoffset, "reg", memory_data, + sizeof(memory_data)); + if (ret < 0) + printf("ft_blob_update): cannot set /memory/reg " + "property err:%s\n", fdt_strerror(ret)); + } + else { + /* memory node is required in dts */ + printf("ft_blob_update(): cannot find /memory node " + "err:%s\n", fdt_strerror(nodeoffset)); + } +} +#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ + + +/* + * Read HW ID from I2C EEPROM and detect the modue we are running on. Note + * that we need to use local variable for readout, because global data is not + * writable yet (and we'll have to redo the readout later on). + */ +int checkboard(void) +{ + hw_id_t hw_id_tmp; + char module_name_tmp[MODULE_NAME_MAXLEN] = ""; + + /* + * We need I2C to access HW ID data from EEPROM, so we call i2c_init() + * here despite the fact that it will be called again later on. We + * also use a little trick to silence I2C-related output. + */ + gd->flags |= GD_FLG_SILENT; + i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + gd->flags &= ~GD_FLG_SILENT; + + read_hw_id(hw_id_tmp); + identify_module(hw_id_tmp); /* this sets gd->board_type */ + compose_module_name(hw_id_tmp, module_name_tmp); + + if (gd->board_type != CM5200_UNKNOWN_MODULE) + printf("Board: %s\n", module_name_tmp); + else + printf("Board: unrecognized cm5200 module (%s)\n", + module_name_tmp); + + return 0; +} + + +int board_early_init_r(void) +{ + /* + * Now, when we are in RAM, enable flash write access for detection + * process. Note that CS_BOOT cannot be cleared when executing in + * flash. + */ + *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ + + /* Now that we can write to global data, read HW ID again. */ + read_hw_id(hw_id); + return 0; +} + + +#ifdef CONFIG_POST +int post_hotkeys_pressed(void) +{ + return 0; +} +#endif /* CONFIG_POST */ + + +#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER) +void post_word_store(ulong a) +{ + vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE); + *save_addr = a; +} + + +ulong post_word_load(void) +{ + vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE); + return *save_addr; +} +#endif /* CONFIG_POST || CONFIG_LOGBUFFER */ + + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) + uchar buf[6]; + char str[18]; + char hostname[MODULE_NAME_MAXLEN]; + + /* Read ethaddr from EEPROM */ + if (i2c_read(CFG_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) { + sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X", + buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]); + /* Check if MAC addr is owned by Schindler */ + if (strstr(str, "00:06:C3") != str) + printf(LOG_PREFIX "Warning - Illegal MAC address (%s)" + " in EEPROM.\n", str); + else { + printf(LOG_PREFIX "Using MAC (%s) from I2C EEPROM\n", + str); + setenv("ethaddr", str); + } + } else { + printf(LOG_PREFIX "Warning - Unable to read MAC from I2C" + " device at address %02X:%04X\n", CFG_I2C_EEPROM, + CONFIG_MAC_OFFSET); + } +#endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) */ + if (!getenv("ethaddr")) + printf(LOG_PREFIX "MAC address not set, networking is not " + "operational\n"); + + /* set the hostname appropriate to the module we're running on */ + compose_hostname(hw_id, hostname); + setenv("hostname", hostname); + + return 0; +} +#endif /* CONFIG_MISC_INIT_R */ + + +#ifdef CONFIG_LAST_STAGE_INIT +int last_stage_init(void) +{ +#ifdef CONFIG_USB_STORAGE + cm5200_fwupdate(); +#endif /* CONFIG_USB_STORAGE */ + return 0; +} +#endif /* CONFIG_LAST_STAGE_INIT */ + + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); + ft_blob_update(blob, bd); +} +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ -- cgit v1.2.3-70-g09d2 From be5d72d10d47609326226225181e301fb9a33b58 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 13 Aug 2007 21:57:53 +0200 Subject: Minor coding style cleanup. Update CHANGELOG. Signed-off-by: Wolfgang Denk --- CHANGELOG | 74 +++++++++++++++++++++++++++++++++++++++++++++ board/cm5200/cm5200.c | 6 ++-- board/cm5200/cm5200.h | 2 +- board/cm5200/cmd_cm5200.c | 2 +- doc/README.generic_usb_ohci | 5 +-- drivers/nand/nand_util.c | 10 +++--- drivers/usb_ohci.c | 11 ------- include/configs/cm5200.h | 21 +------------ libfdt/fdt_ro.c | 1 - 9 files changed, 86 insertions(+), 46 deletions(-) (limited to 'board/cm5200/cm5200.c') diff --git a/CHANGELOG b/CHANGELOG index 1228908a5..57299b65f 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,53 @@ +commit a08458303e7f9db67f296980036d3292c35cb45c +Author: Haavard Skinnemoen +Date: Fri Jun 29 18:38:51 2007 +0200 + + atmel_mci: Fix data timeout value + + Calculate the data timeout based on values from the CSD instead of + just using a hardcoded DTOR value. This is a backport of a similar fix + in BSP 2.0, with one additional fix: the DTOCYC value is rounded up + instead of down. + + Signed-off-by: Haavard Skinnemoen + +commit 0ba8eed28b575626b17e0a7882f923b83e0d7584 +Author: Haavard Skinnemoen +Date: Mon Aug 13 17:22:31 2007 +0200 + + AVR32: Include instead of + + include/asm-avr32/div64.h was recently moved to include/div64.h, but + cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of + the patch was merged perhaps?) + + This patch updates cpu/at32ap/interrupts.c so that the avr32 port + compiles again. + + Signed-off-by: Haavard Skinnemoen + +commit f0d1246ed7cb5a88522244c596d7ae7e6f161283 +Author: Haavard Skinnemoen +Date: Wed Jun 27 13:34:26 2007 +0200 + + atmel_mci: Use 512 byte blocksize if possible + + Instead of always using the largest blocksize the card supports, check + if it can support smaller block sizes and use 512 bytes if possible. + Most cards do support this, and other parts of u-boot seem to have + trouble with block sizes different from 512 bytes. + + Also enable underrun/overrun protection. + + Signed-off-by: Haavard Skinnemoen + Acked-by: Hans-Christian Egtvedt + +commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b +Author: Wolfgang Denk +Date: Sun Aug 12 21:34:50 2007 +0200 + + Update CHANGELOG + commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a Author: Wolfgang Denk Date: Sun Aug 12 21:34:34 2007 +0200 @@ -3928,6 +3978,30 @@ Date: Fri Jan 5 09:15:34 2007 +0100 Signed-off-by Dan Malek, +commit f2134f8e9eb006bdcd729e89f309c07b2fa45180 +Author: Haavard Skinnemoen +Date: Wed May 2 13:31:53 2007 +0200 + + macb: Don't restart autonegotiation if we already have link + + Rework macb_phy_init so that it doesn't attempt to re-negotiate if the + link is already up. + + Signed-off-by: Haavard Skinnemoen + +commit 04fcb5d38bc90779cd9a710d60702075986f0e29 +Author: Haavard Skinnemoen +Date: Wed May 2 13:22:38 2007 +0200 + + macb: Introduce a few barriers when dealing with DMA descriptors + + There were a few theoretical possibilities that the compiler might + optimize away DMA descriptor reads and/or writes and thus cause + synchronization problems with the hardware. Insert barriers where + we depend on reads/writes actually hitting memory. + + Signed-off-by: Haavard Skinnemoen + commit ffa621a0d12a1ccd81c936c567f8917a213787a8 Author: Andy Fleming Date: Sat Feb 24 01:08:13 2007 -0600 diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c index 6804e33c2..b74ac08bc 100644 --- a/board/cm5200/cm5200.c +++ b/board/cm5200/cm5200.c @@ -122,7 +122,7 @@ long int initdram(int board_type) mem_conf_t *mem_conf; mem_conf = get_mem_config(board_type); - + /* configure SDRAM start/end for detection */ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */ @@ -303,7 +303,7 @@ int checkboard(void) hw_id_t hw_id_tmp; char module_name_tmp[MODULE_NAME_MAXLEN] = ""; - /* + /* * We need I2C to access HW ID data from EEPROM, so we call i2c_init() * here despite the fact that it will be called again later on. We * also use a little trick to silence I2C-related output. @@ -321,7 +321,7 @@ int checkboard(void) else printf("Board: unrecognized cm5200 module (%s)\n", module_name_tmp); - + return 0; } diff --git a/board/cm5200/cm5200.h b/board/cm5200/cm5200.h index a6cbc88f4..b2ea5ce0d 100644 --- a/board/cm5200/cm5200.h +++ b/board/cm5200/cm5200.h @@ -138,7 +138,7 @@ static char **hw_id_list[] = { cmu1_qa_hw_id, }; -/* indices to the above list - keep in sync */ +/* indices to the above list - keep in sync */ enum { CM1_QA, CM11_QA, diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c index fd9b914ae..513c36553 100644 --- a/board/cm5200/cmd_cm5200.c +++ b/board/cm5200/cmd_cm5200.c @@ -1,7 +1,7 @@ /* * (C) Copyright 2007 Markus Kappeler * - * Adapted for U-Boot 1.2 by Piotr Kruszynski + * Adapted for U-Boot 1.2 by Piotr Kruszynski * * See file CREDITS for list of people who contributed to this * project. diff --git a/doc/README.generic_usb_ohci b/doc/README.generic_usb_ohci index c343dfdf9..494dd1f5d 100644 --- a/doc/README.generic_usb_ohci +++ b/doc/README.generic_usb_ohci @@ -41,7 +41,7 @@ mpc5xxx. For these the config option CFG_OHCI_BE_CONTROLLER -needs to be defined. +needs to be defined. PCI Controllers @@ -55,6 +55,3 @@ PCI Controllers need to do byte swapping on register accesses, so they should to define: CFG_OHCI_SWAP_REG_ACCESS - - - diff --git a/drivers/nand/nand_util.c b/drivers/nand/nand_util.c index aee872703..cf05043c0 100644 --- a/drivers/nand/nand_util.c +++ b/drivers/nand/nand_util.c @@ -209,7 +209,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) } if (!opts->quiet) { - unsigned long long n =(unsigned long long) + unsigned long long n =(unsigned long long) (erase.addr+meminfo->erasesize-opts->offset) * 100; int percent = (int)do_div(n, erase_length); @@ -476,8 +476,8 @@ int nand_write_opts(nand_info_t *meminfo, const nand_write_options_t *opts) imglen -= readlen; if (!opts->quiet) { - unsigned long long n = (unsigned long long) - (opts->length-imglen) * 100; + unsigned long long n = (unsigned long long) + (opts->length-imglen) * 100; int percent = (int)do_div(n, opts->length); /* output progress message only at whole percent * steps to reduce the number of messages printed @@ -651,8 +651,8 @@ int nand_read_opts(nand_info_t *meminfo, const nand_read_options_t *opts) } if (!opts->quiet) { - unsigned long long n = (unsigned long long) - (opts->length-imglen) * 100; + unsigned long long n = (unsigned long long) + (opts->length-imglen) * 100; int percent = (int)do_div(n ,opts->length); /* output progress message only at whole percent * steps to reduce the number of messages printed diff --git a/drivers/usb_ohci.c b/drivers/usb_ohci.c index d6b745fad..f0a37b20a 100644 --- a/drivers/usb_ohci.c +++ b/drivers/usb_ohci.c @@ -132,8 +132,6 @@ int got_rhsc; /* device which was disconnected */ struct usb_device *devgone; - - /*-------------------------------------------------------------------------*/ /* AMD-756 (D2 rev) reports corrupt register contents in some cases. @@ -157,7 +155,6 @@ static inline u32 roothub_status (struct ohci *hc) static u32 roothub_portstatus (struct ohci *hc, int i) { return read_roothub (hc, portstatus [i], 0xffe0fce0); } - /* forward declaration */ static int hc_interrupt (void); static void @@ -412,8 +409,6 @@ static void ohci_dump (ohci_t *controller, int verbose) ep_print_int_eds (controller, "hcca"); dbg ("hcca frame #%04x", controller->hcca->frame_no); ohci_dump_roothub (controller, 1); -} - #endif /* DEBUG */ @@ -701,7 +696,6 @@ static void periodic_unlink ( struct ohci *ohci, volatile struct ed *ed, } } - /* unlink an ed from one of the HC chains. * just the link to the ed is unlinked. * the link from the ed still points to another operational ed or 0 @@ -759,7 +753,6 @@ static int ep_unlink (ohci_t *ohci, ed_t *edi) return 0; } - /*-------------------------------------------------------------------------*/ /* add/reinit an endpoint; this should be done once at the @@ -939,7 +932,6 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf * Done List handling functions *-------------------------------------------------------------------------*/ - /* calculate the transfer length and update the urb */ static void dl_transfer_length(td_t * td) @@ -951,7 +943,6 @@ static void dl_transfer_length(td_t * td) tdBE = m32_swap (td->hwBE); tdCBP = m32_swap (td->hwCBP); - if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL && ((td->index == 0) || (td->index == lurb_priv->length - 1)))) { if (tdBE != 0) { @@ -1094,7 +1085,6 @@ static __u8 root_hub_dev_des[] = 0x01 /* __u8 bNumConfigurations; */ }; - /* Configuration descriptor */ static __u8 root_hub_config_des[] = { @@ -1172,7 +1162,6 @@ static unsigned char root_hub_str_index1[] = /* Hub class-specific descriptor is constructed dynamically */ - /*-------------------------------------------------------------------------*/ #define OK(x) len = (x); break diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index 56c0ecb4d..d55434802 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -31,7 +31,6 @@ #define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ #define CONFIG_CM5200 1 /* ... on CM5200 platform */ - /* * Supported commands */ @@ -60,7 +59,6 @@ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CONFIG_SILENT_CONSOLE 1 /* needed to silence i2c_init() */ - /* * Ethernet configuration */ @@ -71,7 +69,6 @@ #define CONFIG_MISC_INIT_R 1 #define CONFIG_MAC_OFFSET 0x35 /* MAC address offset in I2C EEPROM */ - /* * POST support */ @@ -80,11 +77,9 @@ /* List of I2C addresses to be verified by POST */ #define I2C_ADDR_LIST { CFG_I2C_SLAVE, CFG_I2C_IO, CFG_I2C_EEPROM } - /* display image timestamps */ #define CONFIG_TIMESTAMP 1 - /* * Autobooting */ @@ -137,19 +132,16 @@ "" #define CONFIG_BOOTCOMMAND "run flash_flash" - /* * Low level configuration */ - /* * Clock configuration */ #define CFG_MPC5XXX_CLKIN 33000000 /* SYS_XTAL_IN = 33MHz */ #define CFG_IPBCLK_EQUALS_XLBCLK 1 /* IPB = 133MHz */ - /* * Memory map */ @@ -184,7 +176,7 @@ */ #define CFG_FLASH_CFI 1 #define CFG_FLASH_CFI_DRIVER 1 -#define CFG_FLASH_BASE 0xfc000000 +#define CFG_FLASH_BASE 0xfc000000 /* we need these despite using CFI */ #define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CFG_MAX_FLASH_SECT 256 /* max num of sectors on one chip */ @@ -215,7 +207,6 @@ #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x00000001 - /* * SDRAM configuration * settings for k4s561632E-xx75, assuming XLB = 132 MHz @@ -225,8 +216,6 @@ #define SDRAM_CONFIG1 0xE2333900 #define SDRAM_CONFIG2 0x8EE70000 - - /* * MTD configuration */ @@ -238,7 +227,6 @@ "2m(kernel),27904k(rootfs)," \ "-(config)" - /* * I2C configuration */ @@ -249,13 +237,11 @@ #define CFG_I2C_IO 0x38 /* PCA9554AD I2C I/O port address */ #define CFG_I2C_EEPROM 0x53 /* I2C EEPROM device address */ - /* * RTC configuration */ #define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ - /* * USB configuration */ @@ -284,7 +270,6 @@ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) - /* * Pin multiplexing configuration */ @@ -302,7 +287,6 @@ */ #define CFG_GPS_PORT_CONFIG 0x10559C44 - /* * Miscellaneous configurable options */ @@ -322,7 +306,6 @@ #define CFG_LOAD_ADDR 0x100000 /* default load address */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Various low-level settings */ @@ -334,7 +317,6 @@ #define CFG_XLB_PIPELINING 1 /* enable transaction pipeling */ - /* * Cache Configuration */ @@ -343,7 +325,6 @@ #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif - /* * Flat Device Tree support */ diff --git a/libfdt/fdt_ro.c b/libfdt/fdt_ro.c index ffd9209b1..46d525db1 100644 --- a/libfdt/fdt_ro.c +++ b/libfdt/fdt_ro.c @@ -534,4 +534,3 @@ int fdt_get_reservemap(void *fdt, int n, struct fdt_reserve_entry *re) } #endif /* CONFIG_OF_LIBFDT */ - -- cgit v1.2.3-70-g09d2