index
:
olio-uboot-2014.01.git
H1-2012.04.01
H1-2013.10
H1-2014.01
debug-no-nand
fastboot
master
Unnamed repository; edit this file 'description' to name the repository.
summary
refs
log
tree
commit
diff
log msg
author
committer
range
Age
Commit message (
Expand
)
Author
2015-11-08
Corrected NAND memory addresses to match those used in the Linux kernel.
HEAD
fastboot
mattis fjallstrom
2015-11-06
Changed fastboot id from hardcoded number to ipaddress read from environment.
mattis fjallstrom
2015-09-06
First fastboot commit, MLO built here wont work so be careful.
mattis fjallstrom
2015-07-16
Fix for tps65910 errata, fixes issue with early enabling of voltages.
H1-2014.01
mattis fjallstrom
2015-07-06
Enabling all regulators through the tps65910 driver. The remaining outputs ar...
master
mattis fjallstrom
2015-07-02
Enabling some regulators in u-boot so that we get successful boots immediately.
mattis fjallstrom
2015-06-05
Adding off-mode settings for unused pins.
mattis fjallstrom
2015-03-24
Adding some environment variables which makes the life of a kernel programmer...
mattis fjallstrom
2015-01-29
Cleaned up and double-verified BCH8 build and setups
mattis fjallstrom
2015-01-27
FINALLYgit status ./! committing the omap3_h1 header file.
mattis fjallstrom
2015-01-19
Changes to config file for BCH8
mattis fjallstrom
2014-10-09
Merge "olio h1: pinmux: Pulling up MCSPI2_SIMO (Bluetooth reset pin)" into H1...
Mattis Fjallstrom
2014-12-15
olio h1: pinmux: Pulling up MCSPI2_SIMO (Bluetooth reset pin)
Evan Wilson
2014-11-07
cmd_load: Removed user prompt when switching baudrates on serial load.
Evan Wilson
2014-10-09
Merge changes Ibd0e5688,Ibb9d5084,I5983c76c into H1-2014.01
Evan Wilson
2014-11-11
Cleaned up broken solution for building with software ECC.
mattis fjallstrom
2014-10-30
Allow building for software ECC from the commandline - flag is SW_ECC=1.
mattis fjallstrom
2014-10-29
Software ECC and adding 3000000 as a baudrate possibility
mattis fjallstrom
2014-10-09
Merge "OMAP3H1: Pinmux: New pinmux for Bluetooth to work Set BCM 20702 REG_EN...
Evan Wilson
2014-10-15
OMAP3H1: Pinmux: New pinmux for Bluetooth to work
Evan Wilson
2014-10-15
Adding memtest and build-time flag for SPL serial boot
mattis fjallstrom
2014-09-29
Redefining memory config, and ECC settings
Evan Wilson
2014-09-01
Enabling NAND UNLOCK command on H1 board
Evan Wilson
2014-09-01
Changing H1 board memory size
Evan Wilson
2014-05-09
Updated pinmux and boot commands
Evan Wilson
2014-04-08
Remove I2C from misc_init_r
Evan Wilson
2014-04-08
Testing new I2C pin mux
Evan Wilson
2014-04-07
Changes for 2014.01 U-boot version
Evan Wilson
2014-04-03
U-boot flashed and booting
Evan Wilson
2014-04-03
Changes to custom pinmux
Evan Wilson
2014-04-03
Updated memory configuration(NAND and DDR). Removed led.c from board init. Si...
Evan Wilson
2014-04-03
Removed TWL4030 support
Evan Wilson
2014-04-03
Removed USB and Ethernet support
Evan Wilson
2014-04-03
Removed LED and MMC support
Evan Wilson
2014-04-03
Removed code not related to AM37
Evan Wilson
2014-04-03
Created H1 board port
Evan Wilson
2014-01-20
Prepare v2014.01
v2014.01
Tom Rini
2014-01-20
fdt_support.c: Correct linux,initrd-start/end setting
Tom Rini
2014-01-20
ARM: bcm2835: fix mailbox timeout
Stephen Warren
2014-01-20
ARM: rpi_b: power on SDHCI and USB HW modules
Stephen Warren
2014-01-20
spl: common: Properly ignore spl/Makefile in .gitignore
Dan Murphy
2014-01-20
.gitignore: ignore u-boot.elf and tools/relocate-rela
Masahiro Yamada
2014-01-20
yaffs2: Remove block number check from summary verification
Charles Manning
2014-01-20
ext4fs: fix "invalid extent block" error
Ionut Nicu
2014-01-20
ext4fs: use EXT2_BLOCK_SIZE instead of fs->blksz
Ionut Nicu
2014-01-20
board:universal: fix i2c adapter
Piotr Wilczek
2014-01-20
fs/ext4: fix calling put_ext4 with truncated offset
Ma Haijun
2014-01-20
fs/ext4: fix partition size get truncated in calculation
Ma Haijun
2014-01-20
Merge branch 'master' of git://git.denx.de/u-boot-i2c
Tom Rini
2014-01-20
Merge branch 'master' of git://www.denx.de/git/u-boot-imx
Tom Rini
[next]