diff options
Diffstat (limited to 'nand_spl')
| -rw-r--r-- | nand_spl/board/freescale/mpc8313erdb/Makefile | 101 | ||||
| -rw-r--r-- | nand_spl/board/freescale/mpc8313erdb/u-boot.lds | 52 | ||||
| -rw-r--r-- | nand_spl/nand_boot.c | 98 | ||||
| -rw-r--r-- | nand_spl/nand_boot_fsl_elbc.c | 150 | 
4 files changed, 354 insertions, 47 deletions
| diff --git a/nand_spl/board/freescale/mpc8313erdb/Makefile b/nand_spl/board/freescale/mpc8313erdb/Makefile new file mode 100644 index 000000000..3da1b1fff --- /dev/null +++ b/nand_spl/board/freescale/mpc8313erdb/Makefile @@ -0,0 +1,101 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# (C) Copyright 2008 Freescale Semiconductor +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +NAND_SPL := y +TEXT_BASE := 0xfff00000 +PAD_TO := 0xfff04000 + +include $(TOPDIR)/config.mk + +LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds +LDFLAGS	= -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +AFLAGS	+= -DCONFIG_NAND_SPL +CFLAGS	+= -DCONFIG_NAND_SPL + +SOBJS	= start.o ticks.o +COBJS	= nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o nand_init.o time.o + +SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) +OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS)) +__OBJS	:= $(SOBJS) $(COBJS) +LNDIR	:= $(OBJTREE)/nand_spl/board/$(BOARDDIR) + +nandobj	:= $(OBJTREE)/nand_spl/ + +ALL	= $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin + +all:	$(obj).depend $(ALL) + +$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl +	$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ + +$(nandobj)u-boot-spl.bin:	$(nandobj)u-boot-spl +	$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ + +$(nandobj)u-boot-spl:	$(OBJS) +	cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \ +		-Map $(nandobj)u-boot-spl.map \ +		-o $(nandobj)u-boot-spl + +# create symbolic links for common files + +$(obj)start.S: +	ln -sf $(SRCTREE)/cpu/mpc83xx/start.S $(obj)start.S + +$(obj)nand_boot_fsl_elbc.c: +	ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \ +	       $(obj)nand_boot_fsl_elbc.c + +$(obj)sdram.c: +	ln -sf $(SRCTREE)/board/$(BOARDDIR)/sdram.c $(obj)sdram.c + +$(obj)$(BOARD).c: +	ln -sf $(SRCTREE)/board/$(BOARDDIR)/$(BOARD).c $(obj)$(BOARD).c + +$(obj)ns16550.c: +	ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c + +$(obj)nand_init.c: +	ln -sf $(SRCTREE)/cpu/mpc83xx/nand_init.c $(obj)nand_init.c + +$(obj)time.c: +	ln -sf $(SRCTREE)/lib_ppc/time.c $(obj)time.c + +$(obj)ticks.S: +	ln -sf $(SRCTREE)/lib_ppc/ticks.S $(obj)ticks.S + +######################################################################### + +$(obj)%.o:	$(obj)%.S +	$(CC) $(AFLAGS) -c -o $@ $< + +$(obj)%.o:	$(obj)%.c +	$(CC) $(CFLAGS) -c -o $@ $< + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/nand_spl/board/freescale/mpc8313erdb/u-boot.lds b/nand_spl/board/freescale/mpc8313erdb/u-boot.lds new file mode 100644 index 000000000..40c414549 --- /dev/null +++ b/nand_spl/board/freescale/mpc8313erdb/u-boot.lds @@ -0,0 +1,52 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright 2008 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SECTIONS +{ +	. = 0xfff00000; +	.text : { +		*(.text*) +		. = ALIGN(16); +		*(.rodata*) +		*(.eh_frame) +	} + +	. = ALIGN(8); +	.data : { +		*(.data*) +		*(.sdata*) +		_GOT2_TABLE_ = .; +		*(.got2) +		__got2_entries = (. - _GOT2_TABLE_) >> 2; +	} + +	. = ALIGN(8); +	__bss_start = .; +	.bss (NOLOAD) : { *(.*bss) } +	_end = .; +} +ENTRY(_start) +ASSERT(_end <= 0xfff01000, "NAND bootstrap too big"); diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c index 563a80b95..16d128fc8 100644 --- a/nand_spl/nand_boot.c +++ b/nand_spl/nand_boot.c @@ -20,6 +20,7 @@  #include <common.h>  #include <nand.h> +#include <asm/io.h>  #define CFG_NAND_READ_DELAY \  	{ volatile int dummy; int i; for (i=0; i<10000; i++) dummy = i; } @@ -38,32 +39,31 @@ static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8  	int page_addr = page + block * CFG_NAND_PAGE_COUNT;  	if (this->dev_ready) -		this->dev_ready(mtd); +		while (!this->dev_ready(mtd)) +			;  	else  		CFG_NAND_READ_DELAY;  	/* Begin command latch cycle */ -	this->hwcontrol(mtd, NAND_CTL_SETCLE); -	this->write_byte(mtd, cmd); +	this->cmd_ctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);  	/* Set ALE and clear CLE to start address cycle */ -	this->hwcontrol(mtd, NAND_CTL_CLRCLE); -	this->hwcontrol(mtd, NAND_CTL_SETALE);  	/* Column address */ -	this->write_byte(mtd, offs);					/* A[7:0] */ -	this->write_byte(mtd, (uchar)(page_addr & 0xff));		/* A[16:9] */ -	this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff));	/* A[24:17] */ +	this->cmd_ctrl(mtd, offs, NAND_CTRL_ALE | NAND_CTRL_CHANGE); +	this->cmd_ctrl(mtd, page_addr & 0xff, 0); /* A[16:9] */ +	this->cmd_ctrl(mtd, (page_addr >> 8) & 0xff, 0); /* A[24:17] */  #ifdef CFG_NAND_4_ADDR_CYCLE  	/* One more address cycle for devices > 32MiB */ -	this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x0f));	/* A[xx:25] */ +	this->cmd_ctrl(mtd, (page_addr >> 16) & 0x0f, 0); /* A[28:25] */  #endif  	/* Latch in address */ -	this->hwcontrol(mtd, NAND_CTL_CLRALE); +	this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);  	/*  	 * Wait a while for the data to be ready  	 */  	if (this->dev_ready) -		this->dev_ready(mtd); +		while (!this->dev_ready(mtd)) +			;  	else  		CFG_NAND_READ_DELAY; @@ -76,51 +76,45 @@ static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8  static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 cmd)  {  	struct nand_chip *this = mtd->priv; -	int page_offs = offs;  	int page_addr = page + block * CFG_NAND_PAGE_COUNT;  	if (this->dev_ready) -		this->dev_ready(mtd); +		while (!this->dev_ready(mtd)) +			;  	else  		CFG_NAND_READ_DELAY;  	/* Emulate NAND_CMD_READOOB */  	if (cmd == NAND_CMD_READOOB) { -		page_offs += CFG_NAND_PAGE_SIZE; +		offs += CFG_NAND_PAGE_SIZE;  		cmd = NAND_CMD_READ0;  	}  	/* Begin command latch cycle */ -	this->hwcontrol(mtd, NAND_CTL_SETCLE); -	this->write_byte(mtd, cmd); +	this->cmd_ctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);  	/* Set ALE and clear CLE to start address cycle */ -	this->hwcontrol(mtd, NAND_CTL_CLRCLE); -	this->hwcontrol(mtd, NAND_CTL_SETALE);  	/* Column address */ -	this->write_byte(mtd, page_offs & 0xff);			/* A[7:0] */ -	this->write_byte(mtd, (uchar)((page_offs >> 8) & 0xff));	/* A[11:9] */ +	this->cmd_ctrl(mtd, offs & 0xff, +	               NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */ +	this->cmd_ctrl(mtd, (offs >> 8) & 0xff, 0); /* A[11:9] */  	/* Row address */ -	this->write_byte(mtd, (uchar)(page_addr & 0xff));		/* A[19:12] */ -	this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff));	/* A[27:20] */ +	this->cmd_ctrl(mtd, (page_addr & 0xff), 0); /* A[19:12] */ +	this->cmd_ctrl(mtd, ((page_addr >> 8) & 0xff), 0); /* A[27:20] */  #ifdef CFG_NAND_5_ADDR_CYCLE  	/* One more address cycle for devices > 128MiB */ -	this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x0f));	/* A[xx:28] */ +	this->cmd_ctrl(mtd, (page_addr >> 16) & 0x0f, 0); /* A[31:28] */  #endif  	/* Latch in address */ -	this->hwcontrol(mtd, NAND_CTL_CLRALE); - -	/* Begin command latch cycle */ -	this->hwcontrol(mtd, NAND_CTL_SETCLE); -	/* Write out the start read command */ -	this->write_byte(mtd, NAND_CMD_READSTART); -	/* End command latch cycle */ -	this->hwcontrol(mtd, NAND_CTL_CLRCLE); +	this->cmd_ctrl(mtd, NAND_CMD_READSTART, +	               NAND_CTRL_CLE | NAND_CTRL_CHANGE); +	this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);  	/*  	 * Wait a while for the data to be ready  	 */  	if (this->dev_ready) -		this->dev_ready(mtd); +		while (!this->dev_ready(mtd)) +			;  	else  		CFG_NAND_READ_DELAY; @@ -137,7 +131,7 @@ static int nand_is_bad_block(struct mtd_info *mtd, int block)  	/*  	 * Read one byte  	 */ -	if (this->read_byte(mtd) != 0xff) +	if (readb(this->IO_ADDR_R) != 0xff)  		return 1;  	return 0; @@ -166,9 +160,9 @@ static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)  	oob_data = ecc_calc + 0x200;  	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { -		this->enable_hwecc(mtd, NAND_ECC_READ); +		this->ecc.hwctl(mtd, NAND_ECC_READ);  		this->read_buf(mtd, p, eccsize); -		this->calculate_ecc(mtd, p, &ecc_calc[i]); +		this->ecc.calculate(mtd, p, &ecc_calc[i]);  	}  	this->read_buf(mtd, oob_data, CFG_NAND_OOBSIZE); @@ -184,35 +178,39 @@ static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)  		 * from correct_data(). We just hope that all possible errors  		 * are corrected by this routine.  		 */ -		stat = this->correct_data(mtd, p, &ecc_code[i], &ecc_calc[i]); +		stat = this->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);  	}  	return 0;  } -static int nand_load(struct mtd_info *mtd, int offs, int uboot_size, uchar *dst) +static int nand_load(struct mtd_info *mtd, unsigned int offs, +                     unsigned int uboot_size, uchar *dst)  { -	int block; -	int blockcopy_count; -	int page; +	unsigned int block, lastblock; +	unsigned int page;  	/* -	 * offs has to be aligned to a block address! +	 * offs has to be aligned to a page address!  	 */  	block = offs / CFG_NAND_BLOCK_SIZE; -	blockcopy_count = 0; +	lastblock = (offs + uboot_size - 1) / CFG_NAND_BLOCK_SIZE; +	page = (offs % CFG_NAND_BLOCK_SIZE) / CFG_NAND_PAGE_SIZE; -	while (blockcopy_count < (uboot_size / CFG_NAND_BLOCK_SIZE)) { +	while (block <= lastblock) {  		if (!nand_is_bad_block(mtd, block)) {  			/*  			 * Skip bad blocks  			 */ -			for (page = 0; page < CFG_NAND_PAGE_COUNT; page++) { +			while (page < CFG_NAND_PAGE_COUNT) {  				nand_read_page(mtd, block, page, dst);  				dst += CFG_NAND_PAGE_SIZE; +				page++;  			} -			blockcopy_count++; +			page = 0; +		} else { +			lastblock++;  		}  		block++; @@ -231,7 +229,7 @@ void nand_boot(void)  	struct nand_chip nand_chip;  	nand_info_t nand_info;  	int ret; -	void (*uboot)(void); +	__attribute__((noreturn)) void (*uboot)(void);  	/*  	 * Init board specific nand support @@ -241,15 +239,21 @@ void nand_boot(void)  	nand_chip.dev_ready = NULL;	/* preset to NULL */  	board_nand_init(&nand_chip); +	if (nand_chip.select_chip) +		nand_chip.select_chip(&nand_info, 0); +  	/*  	 * Load U-Boot image from NAND into RAM  	 */  	ret = nand_load(&nand_info, CFG_NAND_U_BOOT_OFFS, CFG_NAND_U_BOOT_SIZE,  			(uchar *)CFG_NAND_U_BOOT_DST); +	if (nand_chip.select_chip) +		nand_chip.select_chip(&nand_info, -1); +  	/*  	 * Jump to U-Boot image  	 */ -	uboot = (void (*)(void))CFG_NAND_U_BOOT_START; +	uboot = (void *)CFG_NAND_U_BOOT_START;  	(*uboot)();  } diff --git a/nand_spl/nand_boot_fsl_elbc.c b/nand_spl/nand_boot_fsl_elbc.c new file mode 100644 index 000000000..0d2378ee8 --- /dev/null +++ b/nand_spl/nand_boot_fsl_elbc.c @@ -0,0 +1,150 @@ +/* + * NAND boot for Freescale Enhanced Local Bus Controller, Flash Control Machine + * + * (C) Copyright 2006-2008 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * Copyright (c) 2008 Freescale Semiconductor, Inc. + * Author: Scott Wood <scottwood@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/immap_83xx.h> +#include <asm/fsl_lbc.h> +#include <linux/mtd/nand.h> + +#define WINDOW_SIZE 8192 + +static void nand_wait(void) +{ +	lbus83xx_t *regs = (lbus83xx_t *)(CFG_IMMR + 0x5000); + +	for (;;) { +		uint32_t status = in_be32(®s->ltesr); + +		if (status == 1) +			return; + +		if (status & 1) { +			puts("read failed (ltesr)\n"); +			for (;;); +		} +	} +} + +static void nand_load(unsigned int offs, int uboot_size, uchar *dst) +{ +	lbus83xx_t *regs = (lbus83xx_t *)(CFG_IMMR + 0x5000); +	uchar *buf = (uchar *)CFG_NAND_BASE; +	int large = in_be32(®s->bank[0].or) & OR_FCM_PGS; +	int block_shift = large ? 17 : 14; +	int block_size = 1 << block_shift; +	int page_size = large ? 2048 : 512; +	int bad_marker = large ? page_size + 0 : page_size + 5; +	int fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT) | 2; +	int pos = 0; + +	if (offs & (block_size - 1)) { +		puts("bad offset\n"); +		for (;;); +	} + +	if (large) { +		fmr |= FMR_ECCM; +		out_be32(®s->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) | +		                     (NAND_CMD_READSTART << FCR_CMD1_SHIFT)); +		out_be32(®s->fir, +		         (FIR_OP_CW0 << FIR_OP0_SHIFT) | +		         (FIR_OP_CA  << FIR_OP1_SHIFT) | +		         (FIR_OP_PA  << FIR_OP2_SHIFT) | +		         (FIR_OP_CW1 << FIR_OP3_SHIFT) | +		         (FIR_OP_RBW << FIR_OP4_SHIFT)); +	} else { +		out_be32(®s->fcr, NAND_CMD_READ0 << FCR_CMD0_SHIFT); +		out_be32(®s->fir, +		         (FIR_OP_CW0 << FIR_OP0_SHIFT) | +		         (FIR_OP_CA  << FIR_OP1_SHIFT) | +		         (FIR_OP_PA  << FIR_OP2_SHIFT) | +		         (FIR_OP_RBW << FIR_OP3_SHIFT)); +	} + +	out_be32(®s->fbcr, 0); +	clrsetbits_be32(®s->bank[0].br, BR_DECC, BR_DECC_CHK_GEN); + +	while (pos < uboot_size) { +		int i = 0; +		out_be32(®s->fbar, offs >> block_shift); + +		do { +			int j; +			unsigned int page_offs = (offs & (block_size - 1)) << 1; + +			out_be32(®s->ltesr, ~0); +			out_be32(®s->lteatr, 0); +			out_be32(®s->fpar, page_offs); +			out_be32(®s->fmr, fmr); +			out_be32(®s->lsor, 0); +			nand_wait(); + +			page_offs %= WINDOW_SIZE; + +			/* +			 * If either of the first two pages are marked bad, +			 * continue to the next block. +			 */ +			if (i++ < 2 && buf[page_offs + bad_marker] != 0xff) { +				puts("skipping\n"); +				offs = (offs + block_size) & ~(block_size - 1); +				pos &= ~(block_size - 1); +				break; +			} + +			for (j = 0; j < page_size; j++) +				dst[pos + j] = buf[page_offs + j]; + +			pos += page_size; +			offs += page_size; +		} while (offs & (block_size - 1)); +	} +} + +/* + * The main entry for NAND booting. It's necessary that SDRAM is already + * configured and available since this code loads the main U-Boot image + * from NAND into SDRAM and starts it from there. + */ +void nand_boot(void) +{ +	__attribute__((noreturn)) void (*uboot)(void); + +	udelay(1000000); + +	/* +	 * Load U-Boot image from NAND into RAM +	 */ +	nand_load(CFG_NAND_U_BOOT_OFFS, CFG_NAND_U_BOOT_SIZE, +	          (uchar *)CFG_NAND_U_BOOT_DST); + +	/* +	 * Jump to U-Boot image +	 */ +	puts("transfering control\n"); +	uboot = (void *)CFG_NAND_U_BOOT_START; +	uboot(); +} |