diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/aspenite.h | 8 | ||||
| -rw-r--r-- | include/configs/mv-common.h | 147 |
2 files changed, 29 insertions, 126 deletions
diff --git a/include/configs/aspenite.h b/include/configs/aspenite.h index 706365f80..fd35f3e11 100644 --- a/include/configs/aspenite.h +++ b/include/configs/aspenite.h @@ -41,6 +41,13 @@ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ /* + * There is no internal RAM in ARMADA100, using DRAM + * TBD: dcache to be used for this + */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) +#define CONFIG_NR_DRAM_BANKS_MAX 2 + +/* * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ @@ -53,6 +60,7 @@ * to enable certain macros */ #include "mv-common.h" +#undef CONFIG_ARCH_MISC_INIT /* * Environment variables configurations diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index 97b69713a..a8937dde2 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -37,54 +37,6 @@ * High Level Configuration Options (easy to change) */ #define CONFIG_MARVELL 1 -#define CONFIG_ARM926EJS 1 /* Basic Architecture */ - -/* ====> Kirkwood Platform Common Definations */ -#if defined(CONFIG_KIRKWOOD) -#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ -#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ -#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ -#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 for kernel */ - -/* - * By default kwbimage.cfg from board specific folder is used - * If for some board, different configuration file need to be used, - * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file - */ -#ifndef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage.cfg -#endif /* CONFIG_SYS_KWD_CONFIG */ - -/* Kirkwood has 2k of Security SRAM, use it for SP */ -#define CONFIG_SYS_INIT_SP_ADDR 0xC8012000 -#define CONFIG_NR_DRAM_BANKS_MAX 2 - -#define CONFIG_I2C_MVTWSI_BASE KW_TWSI_BASE -#define MV_UART_CONSOLE_BASE KW_UART0_BASE -#define MV_SATA_BASE KW_SATA_BASE -#define MV_SATA_PORT0_OFFSET KW_SATA_PORT0_OFFSET -#define MV_SATA_PORT1_OFFSET KW_SATA_PORT1_OFFSET - -/* ====> ARMADA100 Platform Common Definations */ -#elif defined (CONFIG_ARMADA100) - -#define CONFIG_SYS_TCLK (14745600) /* NS16550 clk config */ -#define CONFIG_SYS_HZ_CLOCK (3250000) /* Timer Freq. 3.25MHZ */ -#define CONFIG_MARVELL_MFP /* Enable mvmfp driver */ -#define MV_MFPR_BASE ARMD1_MFPR_BASE -#define MV_UART_CONSOLE_BASE ARMD1_UART1_BASE -#define CONFIG_SYS_NS16550_IER (1 << 6) /* Bit 6 in UART_IER register - represents UART Unit Enable */ -/* - * There is no internal RAM in ARMADA100, using DRAM - * TBD: dcache to be used for this - */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) -#define CONFIG_NR_DRAM_BANKS_MAX 2 - -#else -#error "Unsupported SoC Platform..." -#endif /* * Custom CONFIG_SYS_TEXT_BASE can be done in <board>.h @@ -138,31 +90,6 @@ +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ /* - * NAND configuration - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_KIRKWOOD -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS 1 -#define CONFIG_SYS_NAND_BASE 0xD8000000 /* MV_DEFADR_NANDF */ -#define NAND_ALLOW_ERASE_ALL 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ -#endif - -/* - * SPI Flash configuration - */ -#ifdef CONFIG_CMD_SF -#define CONFIG_SPI_FLASH 1 -#define CONFIG_HARD_SPI 1 -#define CONFIG_KIRKWOOD_SPI 1 -#define CONFIG_SPI_FLASH_MACRONIX 1 -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 50000000 /*50Mhz */ -#endif - -/* * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* 1MiB for malloc() */ @@ -176,9 +103,7 @@ #define CONFIG_CMDLINE_EDITING #define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ -#ifndef CONFIG_ARMADA100 /* will be removed latter */ #define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ -#endif /* CONFIG_ARMADA100 */ #define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */ #define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ #define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ @@ -199,27 +124,32 @@ #endif #endif /* CONFIG_NR_DRAM_BANKS */ +/* ====> Include platform Common Definations */ +#include <asm/arch/config.h> + +/* ====> Include driver Common Definations */ /* - * Ethernet Driver configuration + * Common NAND configuration */ -#ifdef CONFIG_CMD_NET -#define CONFIG_CMD_MII -#define CONFIG_NETCONSOLE /* include NetConsole support */ -#define CONFIG_NET_MULTI /* specify more that one ports available */ -#define CONFIG_MII /* expose smi ove miiphy interface */ -#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */ -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ -#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ -#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */ -#endif /* CONFIG_CMD_NET */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ +#endif + +/* + * Common SPI Flash configuration + */ +#ifdef CONFIG_CMD_SF +#define CONFIG_SPI_FLASH 1 +#define CONFIG_SPI_FLASH_MACRONIX 1 +#endif /* - * USB/EHCI + * Common USB/EHCI configuration */ #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI /* Enable EHCI USB support */ -#define CONFIG_USB_EHCI_KIRKWOOD -#define CONFIG_EHCI_IS_TDI #define CONFIG_USB_STORAGE #define CONFIG_DOS_PARTITION #define CONFIG_ISO_PARTITION @@ -227,44 +157,9 @@ #endif /* CONFIG_CMD_USB */ /* - * IDE Support on SATA ports - */ -#ifdef CONFIG_CMD_IDE -#define __io -#define CONFIG_CMD_EXT2 -#define CONFIG_MVSATA_IDE -#define CONFIG_IDE_PREINIT -#define CONFIG_MVSATA_IDE_USE_PORT1 -/* Needs byte-swapping for ATA data register */ -#define CONFIG_IDE_SWAP_IO -/* Data, registers and alternate blocks are at the same offset */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0100) -#define CONFIG_SYS_ATA_REG_OFFSET (0x0100) -#define CONFIG_SYS_ATA_ALT_OFFSET (0x0100) -/* Each 8-bit ATA register is aligned to a 4-bytes address */ -#define CONFIG_SYS_ATA_STRIDE 4 -/* Controller supports 48-bits LBA addressing */ -#define CONFIG_LBA48 -/* CONFIG_CMD_IDE requires some #defines for ATA registers */ -#define CONFIG_SYS_IDE_MAXBUS 2 -#define CONFIG_SYS_IDE_MAXDEVICE 2 -/* ATA registers base is at SATA controller base */ -#define CONFIG_SYS_ATA_BASE_ADDR MV_SATA_BASE -#endif /* CONFIG_CMD_IDE */ - -/* - * I2C related stuff - */ -#ifdef CONFIG_CMD_I2C -#define CONFIG_I2C_MVTWSI -#define CONFIG_SYS_I2C_SLAVE 0x0 -#define CONFIG_SYS_I2C_SPEED 100000 -#endif - -/* * File system */ -#ifndef CONFIG_ARMADA100 /* will be removed latter */ +#ifdef CONFIG_SYS_MVFS #define CONFIG_CMD_EXT2 #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_FAT @@ -275,6 +170,6 @@ #define CONFIG_MTD_PARTITIONS #define CONFIG_CMD_MTDPARTS #define CONFIG_LZO -#endif /* CONFIG_ARMADA100 */ +#endif #endif /* _MV_COMMON_H */ |