diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/cm5200.h (renamed from include/configs/cm1_qp1.h) | 48 |
1 files changed, 26 insertions, 22 deletions
diff --git a/include/configs/cm1_qp1.h b/include/configs/cm5200.h index effa41c05..76628560e 100644 --- a/include/configs/cm1_qp1.h +++ b/include/configs/cm5200.h @@ -29,7 +29,7 @@ */ #define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ #define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ -#define CONFIG_CM1_QP1 1 /* ... on CM1.QP1 module */ +#define CONFIG_CM5200 1 /* ... on CM5200 platform */ /* @@ -63,6 +63,7 @@ #define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ #define CONFIG_BAUDRATE 57600 /* ... at 57600 bps */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_SILENT_CONSOLE 1 /* needed to silence i2c_init() */ /* @@ -103,7 +104,6 @@ */ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ - "hostname=cm1_qp1\0" \ "netmask=255.255.0.0\0" \ "ipaddr=192.168.160.33\0" \ "serverip=192.168.1.1\0" \ @@ -116,13 +116,14 @@ "fdt_addr_flash=fc0a0000\0" \ "ramdisk_addr=500000\0" \ "rootpath=/opt/eldk-4.1/ppc_6xx\0" \ - "u-boot=/tftpboot/cm1_qp1/u-boot.bin\0" \ - "bootfile=/tftpboot/cm1_qp1/uImage\0" \ - "fdt_file=/tftpboot/cm1_qp1/cm1_qp1.dtb\0" \ + "u-boot=/tftpboot/cm5200/u-boot.bin\0" \ + "bootfile_fdt=/tftpboot/cm5200/uImage\0" \ + "fdt_file=/tftpboot/cm5200/cm5200.dtb\0" \ "load=tftp ${u-boot_addr} ${u-boot}\0" \ - "update=prot off fc000000 fc05ffff; era fc000000 fc05ffff; " \ + "update=prot off fc000000 +${filesize}; " \ + "era fc000000 +${filesize}; " \ "cp.b ${u-boot_addr} fc000000 ${filesize}; " \ - "prot on fc000000 fc05ffff\0" \ + "prot on fc000000 +${filesize}\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "flashargs=setenv bootargs root=/dev/mtdblock5 rw\0" \ @@ -174,6 +175,8 @@ #define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CONFIG_BOARD_TYPES 1 /* we use board_type */ + #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET #define CFG_MONITOR_BASE TEXT_BASE @@ -181,8 +184,21 @@ #define CFG_MALLOC_LEN (256 << 10) /* 256 kB for malloc() */ #define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */ +/* + * Flash configuration + */ +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_BASE 0xfc000000 +/* we need these despite using CFI */ +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ +#define CFG_MAX_FLASH_SECT 256 /* max num of sectors on one chip */ +#define CFG_FLASH_SIZE 0x02000000 /* 32 MiB */ + + #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) #define CFG_RAMBOOT 1 +#undef CFG_LOWBOOT #endif @@ -215,24 +231,13 @@ #define SDRAM_CONFIG2 0x8EE70000 -/* - * Flash configuration - */ -#define CFG_FLASH_CFI 1 -#define CFG_FLASH_CFI_DRIVER 1 -#define CFG_FLASH_BASE TEXT_BASE -/* we need these despite using CFI */ -#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ -#define CFG_MAX_FLASH_SECT 256 /* max num of sectors on one chip */ -#define CFG_FLASH_SIZE 0x02000000 /* 32 MiB */ - /* * MTD configuration */ #define CONFIG_JFFS2_CMDLINE 1 -#define MTDIDS_DEFAULT "nor0=cm1qp1-0" -#define MTDPARTS_DEFAULT "mtdparts=cm1qp1-0:" \ +#define MTDIDS_DEFAULT "nor0=cm5200-0" +#define MTDPARTS_DEFAULT "mtdparts=cm5200-0:" \ "384k(uboot),128k(env)," \ "128k(redund_env),128k(dtb)," \ "2m(kernel),27904k(rootfs)," \ @@ -347,9 +352,8 @@ /* * Flat Device Tree support */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 -#define OF_FLAT_TREE_MAX_SIZE 8192 /* max size of the flat tree (8K) */ #define OF_CPU "PowerPC,5200@0" #define OF_SOC "soc5200@f0000000" #define OF_TBCLK (bd->bi_busfreq / 4) |