diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/at91sam9x5ek.h | 13 | ||||
| -rw-r--r-- | include/configs/koelsch.h | 41 | ||||
| -rw-r--r-- | include/configs/lager.h | 35 |
3 files changed, 77 insertions, 12 deletions
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index ea9a50e0b..f0a6757ff 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -44,7 +44,6 @@ #define LCD_BPP LCD_COLOR16 #define LCD_OUTPUT_BPP 24 #define CONFIG_LCD_LOGO -#undef LCD_TEST_PATTERN #define CONFIG_LCD_INFO #define CONFIG_LCD_INFO_BELOW_LOGO #define CONFIG_SYS_WHITE_ON_BLACK @@ -62,14 +61,15 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME +/* no NOR flash */ +#define CONFIG_SYS_NO_FLASH + /* * Command line configuration. */ #include <config_cmd_default.h> #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP @@ -101,9 +101,6 @@ #define CONFIG_SF_DEFAULT_SPEED 30000000 #endif -/* no NOR flash */ -#define CONFIG_SYS_NO_FLASH - /* NAND flash */ #ifdef CONFIG_CMD_NAND #define CONFIG_NAND_ATMEL @@ -244,8 +241,4 @@ */ #define CONFIG_SYS_MALLOC_LEN (512 * 1024 + 0x1000) -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index 59c494854..f8cca5b28 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -18,13 +18,18 @@ #include <asm/arch/rmobile.h> -#define CONFIG_CMD_EDITENV -#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_EDITENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_MEMORY #define CONFIG_CMD_DFL #define CONFIG_CMD_SDRAM #define CONFIG_CMD_RUN #define CONFIG_CMD_LOADS +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_FLASH @@ -123,6 +128,20 @@ #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE_REDUND (CONFIG_SYS_MONITOR_LEN) +/* SH Ether */ +#define CONFIG_NET_MULTI +#define CONFIG_SH_ETHER +#define CONFIG_SH_ETHER_USE_PORT 0 +#define CONFIG_SH_ETHER_PHY_ADDR 0x1 +#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CONFIG_SH_ETHER_CACHE_WRITEBACK +#define CONFIG_SH_ETHER_CACHE_INVALIDATE +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI +#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 + /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 10000000 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ @@ -130,4 +149,22 @@ #define CONFIG_SYS_TMU_CLK_DIV 4 #define CONFIG_SYS_HZ 1000 +/* i2c */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_SH +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3 +#define CONFIG_SYS_I2C_SH_BASE0 0xE6500000 +#define CONFIG_SYS_I2C_SH_SPEED0 400000 +#define CONFIG_SYS_I2C_SH_BASE1 0xE6510000 +#define CONFIG_SYS_I2C_SH_SPEED1 400000 +#define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000 +#define CONFIG_SYS_I2C_SH_SPEED2 400000 +#define CONFIG_SH_I2C_DATA_HIGH 4 +#define CONFIG_SH_I2C_DATA_LOW 5 +#define CONFIG_SH_I2C_CLOCK 10000000 + +#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ + #endif /* __KOELSCH_H */ diff --git a/include/configs/lager.h b/include/configs/lager.h index 7819edddc..893282540 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -28,6 +28,11 @@ #define CONFIG_CMD_SDRAM #define CONFIG_CMD_RUN #define CONFIG_CMD_LOADS +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_FLASH @@ -127,12 +132,42 @@ #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE_REDUND (CONFIG_SYS_MONITOR_LEN) +/* SH Ether */ +#define CONFIG_NET_MULTI +#define CONFIG_SH_ETHER +#define CONFIG_SH_ETHER_USE_PORT 0 +#define CONFIG_SH_ETHER_PHY_ADDR 0x1 +#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CONFIG_SH_ETHER_CACHE_WRITEBACK +#define CONFIG_SH_ETHER_CACHE_INVALIDATE +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_RCAR +#define CONFIG_SYS_RCAR_I2C0_BASE 0xE6508000 +#define CONFIG_SYS_RCAR_I2C0_SPEED 400000 +#define CONFIG_SYS_RCAR_I2C1_BASE 0xE6518000 +#define CONFIG_SYS_RCAR_I2C1_SPEED 400000 +#define CONFIG_SYS_RCAR_I2C2_BASE 0xE6530000 +#define CONFIG_SYS_RCAR_I2C2_SPEED 400000 +#define CONFIG_SYS_RCAR_I2C3_BASE 0xE6540000 +#define CONFIG_SYS_RCAR_I2C3_SPEED 400000 +#define CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS 4 + +#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ + /* Board Clock */ #define CONFIG_BASE_CLK_FREQ 20000000u #define CONFIG_SH_TMU_CLK_FREQ (CONFIG_BASE_CLK_FREQ / 2) /* EXT / 2 */ #define CONFIG_PLL1_CLK_FREQ (CONFIG_BASE_CLK_FREQ * 156 / 2) #define CONFIG_PLL1_DIV2_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 2) #define CONFIG_MP_CLK_FREQ (CONFIG_PLL1_DIV2_CLK_FREQ / 15) +#define CONFIG_HP_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 12) #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_MP_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV 4 |