diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/colibri_pxa270.h | 73 |
1 files changed, 37 insertions, 36 deletions
diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 819c5d083..cde84ecc8 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -26,20 +26,16 @@ * High Level Board Configuration Options */ #define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ -#define CONFIG_VPAC270 1 /* Toradex Colibri PXA270 board */ +#define CONFIG_SYS_TEXT_BASE 0x0 -#undef CONFIG_BOARD_LATE_INIT -#undef CONFIG_USE_IRQ -#undef CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_DISPLAY_CPUINFO /* * Environment settings */ -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_TEXT_BASE 0x0 -#define CONFIG_ENV_OVERWRITE /* override default environment */ - +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_MALLOC_LEN (128 * 1024) +#define CONFIG_ARCH_CPU_INIT #define CONFIG_BOOTCOMMAND \ "if mmc init && fatload mmc 0 0xa0000000 uImage; then " \ "bootm 0xa0000000; " \ @@ -53,8 +49,8 @@ #define CONFIG_BOOTDELAY 2 /* Autoboot delay */ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS - #define CONFIG_LZMA /* LZMA compression support */ +#define CONFIG_OF_LIBFDT /* * Serial Console Configuration @@ -101,9 +97,11 @@ */ #ifdef CONFIG_CMD_MMC #define CONFIG_MMC -#define CONFIG_PXA_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_PXA_MMC_GENERIC #define CONFIG_SYS_MMC_BASE 0xF0000000 #define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION #endif @@ -121,34 +119,37 @@ #define CONFIG_SYS_HUSH_PARSER 1 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LONGHELP #ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT "$ " #else -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT "=> " #endif -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_DEVICE_NULLDEV 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_AUTO_COMPLETE 1 + /* * Clock Configuration */ -#undef CONFIG_SYS_CLKS_IN_HZ -#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ -#define CONFIG_SYS_CPUSPEED 0x290 /* 520 MHz */ +#define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */ +#define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */ /* * Stack sizes * * The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ #ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ #endif /* @@ -164,10 +165,9 @@ #define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ -#define CONFIG_SYS_LOAD_ADDR (0xa1000000) - +#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000 /* * NOR FLASH @@ -182,8 +182,8 @@ #define CONFIG_SYS_MAX_FLASH_SECT (4 + 255) #define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_ERASE_TOUT (25 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (25 * CONFIG_SYS_HZ) #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 #define CONFIG_SYS_FLASH_PROTECTION 1 @@ -195,14 +195,15 @@ #define CONFIG_SYS_ENV_IS_NOWHERE #endif -#define CONFIG_SYS_MONITOR_BASE 0x000000 -#define CONFIG_SYS_MONITOR_LEN 0x40000 - -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SECT_SIZE 0x40000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) +#define CONFIG_SYS_MONITOR_BASE 0x0 +#define CONFIG_SYS_MONITOR_LEN 0x80000 +#define CONFIG_ENV_ADDR \ + (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_SIZE 0x40000 +#define CONFIG_ENV_SECT_SIZE 0x40000 +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) /* * GPIO settings |