diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/at91sam9x5ek.h | 13 | ||||
| -rw-r--r-- | include/configs/koelsch.h | 41 | ||||
| -rw-r--r-- | include/configs/lager.h | 35 | ||||
| -rw-r--r-- | include/configs/tec-ng.h | 84 | ||||
| -rw-r--r-- | include/configs/tegra114-common.h | 1 | ||||
| -rw-r--r-- | include/configs/tegra30-common.h | 1 |
6 files changed, 163 insertions, 12 deletions
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index ea9a50e0b..f0a6757ff 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -44,7 +44,6 @@ #define LCD_BPP LCD_COLOR16 #define LCD_OUTPUT_BPP 24 #define CONFIG_LCD_LOGO -#undef LCD_TEST_PATTERN #define CONFIG_LCD_INFO #define CONFIG_LCD_INFO_BELOW_LOGO #define CONFIG_SYS_WHITE_ON_BLACK @@ -62,14 +61,15 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME +/* no NOR flash */ +#define CONFIG_SYS_NO_FLASH + /* * Command line configuration. */ #include <config_cmd_default.h> #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP @@ -101,9 +101,6 @@ #define CONFIG_SF_DEFAULT_SPEED 30000000 #endif -/* no NOR flash */ -#define CONFIG_SYS_NO_FLASH - /* NAND flash */ #ifdef CONFIG_CMD_NAND #define CONFIG_NAND_ATMEL @@ -244,8 +241,4 @@ */ #define CONFIG_SYS_MALLOC_LEN (512 * 1024 + 0x1000) -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index 59c494854..f8cca5b28 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -18,13 +18,18 @@ #include <asm/arch/rmobile.h> -#define CONFIG_CMD_EDITENV -#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_EDITENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_MEMORY #define CONFIG_CMD_DFL #define CONFIG_CMD_SDRAM #define CONFIG_CMD_RUN #define CONFIG_CMD_LOADS +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_FLASH @@ -123,6 +128,20 @@ #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE_REDUND (CONFIG_SYS_MONITOR_LEN) +/* SH Ether */ +#define CONFIG_NET_MULTI +#define CONFIG_SH_ETHER +#define CONFIG_SH_ETHER_USE_PORT 0 +#define CONFIG_SH_ETHER_PHY_ADDR 0x1 +#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CONFIG_SH_ETHER_CACHE_WRITEBACK +#define CONFIG_SH_ETHER_CACHE_INVALIDATE +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI +#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 + /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 10000000 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ @@ -130,4 +149,22 @@ #define CONFIG_SYS_TMU_CLK_DIV 4 #define CONFIG_SYS_HZ 1000 +/* i2c */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_SH +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3 +#define CONFIG_SYS_I2C_SH_BASE0 0xE6500000 +#define CONFIG_SYS_I2C_SH_SPEED0 400000 +#define CONFIG_SYS_I2C_SH_BASE1 0xE6510000 +#define CONFIG_SYS_I2C_SH_SPEED1 400000 +#define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000 +#define CONFIG_SYS_I2C_SH_SPEED2 400000 +#define CONFIG_SH_I2C_DATA_HIGH 4 +#define CONFIG_SH_I2C_DATA_LOW 5 +#define CONFIG_SH_I2C_CLOCK 10000000 + +#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ + #endif /* __KOELSCH_H */ diff --git a/include/configs/lager.h b/include/configs/lager.h index 7819edddc..893282540 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -28,6 +28,11 @@ #define CONFIG_CMD_SDRAM #define CONFIG_CMD_RUN #define CONFIG_CMD_LOADS +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_FLASH @@ -127,12 +132,42 @@ #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE_REDUND (CONFIG_SYS_MONITOR_LEN) +/* SH Ether */ +#define CONFIG_NET_MULTI +#define CONFIG_SH_ETHER +#define CONFIG_SH_ETHER_USE_PORT 0 +#define CONFIG_SH_ETHER_PHY_ADDR 0x1 +#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CONFIG_SH_ETHER_CACHE_WRITEBACK +#define CONFIG_SH_ETHER_CACHE_INVALIDATE +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_RCAR +#define CONFIG_SYS_RCAR_I2C0_BASE 0xE6508000 +#define CONFIG_SYS_RCAR_I2C0_SPEED 400000 +#define CONFIG_SYS_RCAR_I2C1_BASE 0xE6518000 +#define CONFIG_SYS_RCAR_I2C1_SPEED 400000 +#define CONFIG_SYS_RCAR_I2C2_BASE 0xE6530000 +#define CONFIG_SYS_RCAR_I2C2_SPEED 400000 +#define CONFIG_SYS_RCAR_I2C3_BASE 0xE6540000 +#define CONFIG_SYS_RCAR_I2C3_SPEED 400000 +#define CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS 4 + +#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ + /* Board Clock */ #define CONFIG_BASE_CLK_FREQ 20000000u #define CONFIG_SH_TMU_CLK_FREQ (CONFIG_BASE_CLK_FREQ / 2) /* EXT / 2 */ #define CONFIG_PLL1_CLK_FREQ (CONFIG_BASE_CLK_FREQ * 156 / 2) #define CONFIG_PLL1_DIV2_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 2) #define CONFIG_MP_CLK_FREQ (CONFIG_PLL1_DIV2_CLK_FREQ / 15) +#define CONFIG_HP_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 12) #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_MP_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV 4 diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h new file mode 100644 index 000000000..13baa76f9 --- /dev/null +++ b/include/configs/tec-ng.h @@ -0,0 +1,84 @@ +/* + * (C) Copyright 2013 + * Avionic Design GmbH <www.avionic-design.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "tegra30-common.h" + +/* Enable fdt support for tec-ng. Flash the image in u-boot-dtb.bin */ +#define CONFIG_DEFAULT_DEVICE_TREE tegra30-tec-ng +#define CONFIG_OF_CONTROL +#define CONFIG_OF_SEPARATE + +/* High-level configuration options */ +#define V_PROMPT "Tegra30 (TEC-NG) # " +#define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten™ NG Evaluation Carrier" + +/* Board-specific serial config */ +#define CONFIG_SERIAL_MULTI +#define CONFIG_TEGRA_ENABLE_UARTD +#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE + +#define CONFIG_BOARD_EARLY_INIT_F + +/* I2C */ +#define CONFIG_SYS_I2C_TEGRA +#define CONFIG_SYS_I2C_INIT_BOARD +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C + +/* SD/MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_TEGRA_MMC +#define CONFIG_CMD_MMC + +/* Environment in eMMC, at the end of 2nd "boot sector" */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 + +/* SPI */ +#define CONFIG_TEGRA20_SLINK +#define CONFIG_TEGRA_SLINK_CTRLS 6 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SF_DEFAULT_SPEED 24000000 +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH_SIZE (4 << 20) + +/* USB Host support */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_USB + +/* USB networking support */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX + +/* General networking support */ +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP + +/* Tag support */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +/* support the new (FDT-based) image format */ +#define CONFIG_FIT + +#include "tegra-common-post.h" + +#endif /* __CONFIG_H */ diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h index c3de9a999..a4e8a5f5e 100644 --- a/include/configs/tegra114-common.h +++ b/include/configs/tegra114-common.h @@ -82,5 +82,6 @@ /* For USB EHCI controller */ #define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 #endif /* _TEGRA114_COMMON_H_ */ diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h index 99acbfd28..b5550d7d0 100644 --- a/include/configs/tegra30-common.h +++ b/include/configs/tegra30-common.h @@ -79,5 +79,6 @@ /* For USB EHCI controller */ #define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 #endif /* _TEGRA30_COMMON_H_ */ |