diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/TQM5200.h | 26 | ||||
| -rw-r--r-- | include/sm501.h | 48 | 
2 files changed, 66 insertions, 8 deletions
| diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index a5a63443f..b33f726e8 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -37,6 +37,7 @@  #define CONFIG_TQM5200		1	/* ... on TQM5200 module */  #undef CONFIG_TQM5200_REV100		/*  define for revision 100 modules */  #define CONFIG_STK52XX		1	/* ... on a STK52XX base board */ +#define CONFIG_STK52XX_REV100	1	/*  define for revision 100 baseboards */  #define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */ @@ -85,6 +86,7 @@  #define CONFIG_EEPRO100		1  #define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */  #define CONFIG_NS8382X		1 +#endif	/* CONFIG_STK52XX */  #ifdef CONFIG_PCI  #define ADD_PCI_CMD		CFG_CMD_PCI @@ -105,6 +107,7 @@  #define CONFIG_CONSOLE_EXTRA_INFO  #define CONFIG_VIDEO_SW_CURSOR  #define CONFIG_SPLASH_SCREEN +#define CFG_CONSOLE_IS_IN_ENV  #endif  #ifdef CONFIG_VIDEO @@ -373,11 +376,14 @@   *	Bit 0 (mask: 0x80000000): 1   * use ALT CAN position: Bits 2-3 (mask: 0x30000000):   *	00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. - *	      Set for rev 100 modules with an onboard EEPROM (because, - *	      there I2C1 is used as I2C bus)   *	01 -> CAN1 on I2C1, CAN2 on Tmr0/1. - *	      Set for rev 200 modules + *	      Use for REV200 STK52XX boards. Do not use with REV100 modules + *	      (because, there I2C1 is used as I2C bus)   * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 + * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030) + *	000 -> All PSC2 pins are GIOPs + *	001 -> CAN1/2 on PSC2 pins + *	       Use for REV100 STK52xx boards   * use PSC6:   *   on STK52xx:   *	use as UART. Pins PSC6_0 to PSC6_3 are used. @@ -392,12 +398,16 @@  #if defined (CONFIG_MINIFAP)  # define CFG_GPS_PORT_CONFIG	0x91000004  #elif defined (CONFIG_STK52XX) -# if defined (CONFIG_TQM5200_REV100) -#  define CFG_GPS_PORT_CONFIG	0x81500004 -# else -#  define CFG_GPS_PORT_CONFIG	0x91500004 +# if defined (CONFIG_STK52XX_REV100) +#  define CFG_GPS_PORT_CONFIG	0x81500014 +# else /* STK52xx REV200 and above */ +#  if defined (CONFIG_TQM5200_REV100) +#   error TQM5200 REV100 not supported on STK52XX REV200 or above +#  else/* TQM5200 REV200 and above */ +#   define CFG_GPS_PORT_CONFIG	0x91500004 +#  endif  # endif -#else  /* TMQ5200_IP */ +#else  /* TMQ5200 Inbetriebnahme-Board */  # define CFG_GPS_PORT_CONFIG	0x81000004  #endif diff --git a/include/sm501.h b/include/sm501.h new file mode 100644 index 000000000..d8f26fbf2 --- /dev/null +++ b/include/sm501.h @@ -0,0 +1,48 @@ +/* + * (C) Copyright 2002 + * Stäubli Faverges - <www.staubli.com> + * Pierre AUBERT  p.aubert@staubli.com + * + * (C) Copyright 2005 + * Martin Krause TQ-Systems GmbH martin.krause@tqs.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Basic video support for SMI SM501 "Voyager" graphic controller + */ + +#ifndef _SM501_H_ +#define _SM501_H_ + +typedef struct { +	unsigned int Index; +	unsigned int Value; +} SMI_REGS; + +/* Board specific functions                                                  */ +unsigned int board_video_init (void); +void board_validate_screen (unsigned int base); +const SMI_REGS *board_get_regs (void); +int board_get_width (void); +int board_get_height (void); +unsigned int board_video_get_fb (void); + +#endif /* _SM501_H_ */ |