diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/cm_t35.h | 8 | ||||
| -rw-r--r-- | include/configs/coreboot.h | 1 | ||||
| -rw-r--r-- | include/configs/eb_cpu5282.h | 8 | ||||
| -rw-r--r-- | include/configs/h2200.h | 25 | ||||
| -rw-r--r-- | include/configs/sh7752evb.h | 153 | ||||
| -rw-r--r-- | include/env_callback.h | 8 | ||||
| -rw-r--r-- | include/twl4030.h | 44 | ||||
| -rw-r--r-- | include/usb.h | 1 |
8 files changed, 239 insertions, 9 deletions
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 433b447ff..7d072153e 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -114,9 +114,15 @@ #define CONFIG_DOS_PARTITION /* USB */ -#define CONFIG_MUSB_UDC #define CONFIG_USB_OMAP3 +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_OMAP +#define CONFIG_USB_ULPI +#define CONFIG_USB_ULPI_VIEWPORT_OMAP +#define CONFIG_USB_STORAGE +#define CONFIG_MUSB_UDC #define CONFIG_TWL4030_USB +#define CONFIG_CMD_USB /* USB device configuration */ #define CONFIG_USB_DEVICE diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index adeace0cf..d8aabd4cc 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -159,6 +159,7 @@ #define CONFIG_CMD_GPIO #define CONFIG_CMD_IMI #undef CONFIG_CMD_IMLS +#define CONFIG_CMD_IO #define CONFIG_CMD_IRQ #define CONFIG_CMD_ITEST #define CONFIG_CMD_LOADB diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 5a0d321f7..459f56878 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -168,14 +168,6 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE0 #define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE0 -/* If M5282 port is fully implemented the monitor base will be behind - * the vector table. */ -#if (CONFIG_SYS_TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE) -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400) -#else -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */ -#endif - #define CONFIG_SYS_MONITOR_LEN 0x20000 #define CONFIG_SYS_MALLOC_LEN (256 << 10) #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 diff --git a/include/configs/h2200.h b/include/configs/h2200.h index ef14dd38c..516a26e9f 100644 --- a/include/configs/h2200.h +++ b/include/configs/h2200.h @@ -154,4 +154,29 @@ #define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8" +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_USB_DEV_PULLUP_GPIO 33 +/* USB VBUS GPIO 3 */ + +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING + +#define CONFIG_BOOTDELAY 2 +#define CONFIG_BOOTCOMMAND \ + "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \ + "if bootp ; then setenv downloaded 1 ; fi ; done ; " \ + "source :script ; " \ + "bootm ; " + +#define CONFIG_USB_GADGET_PXA2XX +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_SUBSET + +#define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01" +#define CONFIG_USBNET_HOST_ADDR "de:ad:be:ef:00:02" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" + #endif /* __CONFIG_H */ diff --git a/include/configs/sh7752evb.h b/include/configs/sh7752evb.h new file mode 100644 index 000000000..bf6bd4d8c --- /dev/null +++ b/include/configs/sh7752evb.h @@ -0,0 +1,153 @@ +/* + * Configuation settings for the sh7752evb board + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __SH7752EVB_H +#define __SH7752EVB_H + +#undef DEBUG +#define CONFIG_SH 1 +#define CONFIG_SH4A 1 +#define CONFIG_SH_32BIT 1 +#define CONFIG_CPU_SH7752 1 +#define CONFIG_SH7752EVB 1 + +#define CONFIG_SYS_TEXT_BASE 0x5ff80000 +#define CONFIG_SYS_LDSCRIPT "board/renesas/sh7752evb/u-boot.lds" + +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_NFS +#define CONFIG_CMD_DFL +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SF +#define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_MD5SUM +#define CONFIG_MD5 +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp" + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE + +/* MEMORY */ +#define SH7752EVB_SDRAM_BASE (0x40000000) +#define SH7752EVB_SDRAM_SIZE (512 * 1024 * 1024) + +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE 512 +#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE 1 +#define CONFIG_CONS_SCIF2 1 +#undef CONFIG_SYS_CONSOLE_INFO_QUIET +#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE + +#define CONFIG_SYS_MEMTEST_START (SH7752EVB_SDRAM_BASE) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ + 480 * 1024 * 1024) +#undef CONFIG_SYS_ALT_MEMTEST +#undef CONFIG_SYS_MEMTEST_SCRATCH +#undef CONFIG_SYS_LOADS_BAUD_CHANGE + +#define CONFIG_SYS_SDRAM_BASE (SH7752EVB_SDRAM_BASE) +#define CONFIG_SYS_SDRAM_SIZE (SH7752EVB_SDRAM_SIZE) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + \ + 128 * 1024 * 1024) + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) +#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) + +/* FLASH */ +#define CONFIG_SYS_NO_FLASH + +/* Ether */ +#define CONFIG_SH_ETHER 1 +#define CONFIG_SH_ETHER_USE_PORT 0 +#define CONFIG_SH_ETHER_PHY_ADDR 18 +#define CONFIG_SH_ETHER_CACHE_WRITEBACK 1 +#define CONFIG_SH_ETHER_USE_GETHER 1 +#define CONFIG_PHYLIB +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI +#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RGMII +#define CONFIG_PHY_VITESSE + +#define SH7752EVB_ETHERNET_MAC_BASE_SPI 0x00090000 +#define SH7752EVB_SPI_SECTOR_SIZE (64 * 1024) +#define SH7752EVB_ETHERNET_MAC_BASE SH7752EVB_ETHERNET_MAC_BASE_SPI +#define SH7752EVB_ETHERNET_MAC_SIZE 17 +#define SH7752EVB_ETHERNET_NUM_CH 2 +#define CONFIG_BOARD_LATE_INIT + +/* SPI */ +#define CONFIG_SH_SPI 1 +#define CONFIG_SH_SPI_BASE 0xfe002000 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO 1 +#define CONFIG_SPI_FLASH_MACRONIX 1 + +/* MMCIF */ +#define CONFIG_MMC 1 +#define CONFIG_GENERIC_MMC 1 +#define CONFIG_SH_MMCIF 1 +#define CONFIG_SH_MMCIF_ADDR 0xffcb0000 +#define CONFIG_SH_MMCIF_CLK 48000000 + +/* ENV setting */ +#define CONFIG_ENV_IS_EMBEDDED +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_ADDR (0x00080000) +#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR) +#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netboot=bootp; bootm\0" + +/* Board Clock */ +#define CONFIG_SYS_CLK_FREQ 48000000 +#define CONFIG_SYS_TMU_CLK_DIV 4 +#define CONFIG_SYS_HZ 1000 +#endif /* __SH7752EVB_H */ diff --git a/include/env_callback.h b/include/env_callback.h index 47fdc6fa9..c583120c1 100644 --- a/include/env_callback.h +++ b/include/env_callback.h @@ -68,8 +68,16 @@ void env_callback_init(ENTRY *var_entry); * when associated through the ".callbacks" environment variable, the callback * will be executed any time the variable is inserted, overwritten, or deleted. */ +#ifdef CONFIG_SPL_BUILD +#define U_BOOT_ENV_CALLBACK(name, callback) \ + static inline void _u_boot_env_noop_##name(void) \ + { \ + (void)callback; \ + } +#else #define U_BOOT_ENV_CALLBACK(name, callback) \ ll_entry_declare(struct env_clbk_tbl, name, env_clbk, env_clbk) = \ {#name, callback} +#endif #endif /* __ENV_CALLBACK_H__ */ diff --git a/include/twl4030.h b/include/twl4030.h index 0c17f5929..5aa184183 100644 --- a/include/twl4030.h +++ b/include/twl4030.h @@ -580,6 +580,50 @@ #define TWL4030_USB_PHY_CLK_CTRL 0xFE #define TWL4030_USB_PHY_CLK_CTRL_STS 0xFF +/* GPIO */ +#define TWL4030_GPIO_GPIODATAIN1 0x00 +#define TWL4030_GPIO_GPIODATAIN2 0x01 +#define TWL4030_GPIO_GPIODATAIN3 0x02 +#define TWL4030_GPIO_GPIODATADIR1 0x03 +#define TWL4030_GPIO_GPIODATADIR2 0x04 +#define TWL4030_GPIO_GPIODATADIR3 0x05 +#define TWL4030_GPIO_GPIODATAOUT1 0x06 +#define TWL4030_GPIO_GPIODATAOUT2 0x07 +#define TWL4030_GPIO_GPIODATAOUT3 0x08 +#define TWL4030_GPIO_CLEARGPIODATAOUT1 0x09 +#define TWL4030_GPIO_CLEARGPIODATAOUT2 0x0A +#define TWL4030_GPIO_CLEARGPIODATAOUT3 0x0B +#define TWL4030_GPIO_SETGPIODATAOUT1 0x0C +#define TWL4030_GPIO_SETGPIODATAOUT2 0x0D +#define TWL4030_GPIO_SETGPIODATAOUT3 0x0E +#define TWL4030_GPIO_GPIO_DEBEN1 0x0F +#define TWL4030_GPIO_GPIO_DEBEN2 0x10 +#define TWL4030_GPIO_GPIO_DEBEN3 0x11 +#define TWL4030_GPIO_GPIO_CTRL 0x12 +#define TWL4030_GPIO_GPIOPUPDCTR1 0x13 +#define TWL4030_GPIO_GPIOPUPDCTR2 0x14 +#define TWL4030_GPIO_GPIOPUPDCTR3 0x15 +#define TWL4030_GPIO_GPIOPUPDCTR4 0x16 +#define TWL4030_GPIO_GPIOPUPDCTR5 0x17 +#define TWL4030_GPIO_GPIO_ISR1A 0x19 +#define TWL4030_GPIO_GPIO_ISR2A 0x1A +#define TWL4030_GPIO_GPIO_ISR3A 0x1B +#define TWL4030_GPIO_GPIO_IMR1A 0x1C +#define TWL4030_GPIO_GPIO_IMR2A 0x1D +#define TWL4030_GPIO_GPIO_IMR3A 0x1E +#define TWL4030_GPIO_GPIO_ISR1B 0x1F +#define TWL4030_GPIO_GPIO_ISR2B 0x20 +#define TWL4030_GPIO_GPIO_ISR3B 0x21 +#define TWL4030_GPIO_GPIO_IMR1B 0x22 +#define TWL4030_GPIO_GPIO_IMR2B 0x23 +#define TWL4030_GPIO_GPIO_IMR3B 0x24 +#define TWL4030_GPIO_GPIO_EDR1 0x28 +#define TWL4030_GPIO_GPIO_EDR2 0x29 +#define TWL4030_GPIO_GPIO_EDR3 0x2A +#define TWL4030_GPIO_GPIO_EDR4 0x2B +#define TWL4030_GPIO_GPIO_EDR5 0x2C +#define TWL4030_GPIO_GPIO_SIH_CTRL 0x2D + /* * Convience functions to read and write from TWL4030 * diff --git a/include/usb.h b/include/usb.h index 8d8a2c9b9..d79c86588 100644 --- a/include/usb.h +++ b/include/usb.h @@ -392,5 +392,6 @@ int hub_port_reset(struct usb_device *dev, int port, struct usb_device *usb_alloc_new_device(void *controller); int usb_new_device(struct usb_device *dev); +void usb_free_device(void); #endif /*_USB_H_ */ |