diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/ACEX1K.h | 69 | ||||
| -rw-r--r-- | include/altera.h | 73 | ||||
| -rw-r--r-- | include/asm-mips/au1x00.h | 1047 | ||||
| -rw-r--r-- | include/asm-mips/mipsregs.h | 7 | ||||
| -rw-r--r-- | include/configs/dbau1x00.h | 168 |
5 files changed, 1336 insertions, 28 deletions
diff --git a/include/ACEX1K.h b/include/ACEX1K.h new file mode 100644 index 000000000..f75c463f3 --- /dev/null +++ b/include/ACEX1K.h @@ -0,0 +1,69 @@ +/* + * (C) Copyright 2003 + * Steven Scholz, imc Measurement & Control, steven.scholz@imc-berlin.de + * + * (C) Copyright 2002 + * Rich Ireland, Enterasys Networks, rireland@enterasys.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef _ACEX1K_H_ +#define _ACEX1K_H_ + +#include <altera.h> + +extern int ACEX1K_load( Altera_desc *desc, void *image, size_t size ); +extern int ACEX1K_dump( Altera_desc *desc, void *buf, size_t bsize ); +extern int ACEX1K_info( Altera_desc *desc ); +extern int ACEX1K_reloc( Altera_desc *desc, ulong reloc_off ); + +/* Slave Serial Implementation function table */ +typedef struct { + Altera_pre_fn pre; + Altera_config_fn config; + Altera_clk_fn clk; + Altera_status_fn status; + Altera_done_fn done; + Altera_data_fn data; + Altera_abort_fn abort; + Altera_post_fn post; + int relocated; +} Altera_ACEX1K_Passive_Serial_fns; + +/* Device Image Sizes + *********************************************************************/ +/* ACEX1K */ +/* FIXME: Which size do we mean? + * Datasheet says 1337000/8=167125Bytes, + * Filesize of an *.rbf file is 166965 Bytes + */ +#if 0 +#define Altera_EP1K100_SIZE 1337000/8 /* 167125 Bytes */ +#endif +#define Altera_EP1K100_SIZE (166965*8) + +/* Descriptor Macros + *********************************************************************/ +/* ACEX1K devices */ +#define Altera_EP1K100_DESC(iface, fn_table, cookie) \ +{ Altera_ACEX1K, iface, Altera_EP1K100_SIZE, fn_table, cookie } + +#endif /* _ACEX1K_H_ */ diff --git a/include/altera.h b/include/altera.h index 88f72db03..74b6729f9 100644 --- a/include/altera.h +++ b/include/altera.h @@ -28,46 +28,63 @@ #define _ALTERA_H_ /* - * Note that this is just Altera FPGA interface boilerplate. - * There is no support for Altera devices yet. - * - * See include/xilinx.h for a working example. + * See include/xilinx.h for another working example. */ -/* In your board's config.h file you should define CONFIG_FPGA as such: - * #define CONFIG_FPGA (CFG_ALTERA_xxx | CFG_ALTERA_IF_xxx ) - */ +/* Altera Model definitions + *********************************************************************/ +#define CFG_ACEX1K CFG_FPGA_DEV( 0x1 ) -/* Altera Model definitions */ -#define CFG_ALTERA_xxxx ( CFG_FPGA_ALTERA | CFG_FPGA_DEV( 0x1 )) +#define CFG_ALTERA_ACEX1K (CFG_FPGA_ALTERA | CFG_ACEX1K) /* Add new models here */ -/* Altera Interface definitions */ -#define CFG_ALTERA_IF_xxx CFG_FPGA_IF( 0x1 ) +/* Altera Interface definitions + *********************************************************************/ +#define CFG_ALTERA_IF_PS CFG_FPGA_IF( 0x1 ) /* passive serial */ /* Add new interfaces here */ -typedef enum { /* typedef Altera_iface */ - min_altera_iface_type, /* insert all new types after this */ -/* Add new interfaces here */ - max_altera_iface_type /* insert all new types before this */ -} Altera_iface; /* end, typedef Altera_iface */ +typedef enum { /* typedef Altera_iface */ + min_altera_iface_type, /* insert all new types after this */ + passive_serial, /* serial data and external clock */ + passive_parallel_synchronous, /* parallel data */ + passive_parallel_asynchronous, /* parallel data */ + passive_serial_asynchronous, /* serial data w/ internal clock (not used) */ + altera_jtag_mode, /* jtag/tap serial (not used ) */ + max_altera_iface_type /* insert all new types before this */ +} Altera_iface; /* end, typedef Altera_iface */ -typedef enum { /* typedef Altera_Family */ - min_altera_type, /* insert all new types after this */ +typedef enum { /* typedef Altera_Family */ + min_altera_type, /* insert all new types after this */ + Altera_ACEX1K, /* ACEX1K Family */ /* Add new models here */ - max_altera_type /* insert all new types before this */ -} Altera_Family; /* end, typedef Altera_Family */ + max_altera_type /* insert all new types before this */ +} Altera_Family; /* end, typedef Altera_Family */ -typedef struct { /* typedef Altera_desc */ - Altera_Family family; /* part type */ - Altera_iface iface; /* interface type */ - size_t size; /* bytes of data part can accept */ - void * base; /* base interface address */ -} Altera_desc; /* end, typedef Altera_desc */ +typedef struct { /* typedef Altera_desc */ + Altera_Family family; /* part type */ + Altera_iface iface; /* interface type */ + size_t size; /* bytes of data part can accept */ + void * iface_fns;/* interface function table */ + void * base; /* base interface address */ + int cookie; /* implementation specific cookie */ +} Altera_desc; /* end, typedef Altera_desc */ +/* Generic Altera Functions + *********************************************************************/ extern int altera_load( Altera_desc *desc, void *image, size_t size ); extern int altera_dump( Altera_desc *desc, void *buf, size_t bsize ); extern int altera_info( Altera_desc *desc ); -extern int altera_reloc( Altera_desc *desc, ulong reloc_off ); +extern int altera_reloc( Altera_desc *desc, ulong reloc_offset ); + +/* Board specific implementation specific function types + *********************************************************************/ +typedef int (*Altera_pre_fn)( int cookie ); +typedef int (*Altera_config_fn)( int assert_config, int flush, int cookie ); +typedef int (*Altera_status_fn)( int cookie ); +typedef int (*Altera_done_fn)( int cookie ); +typedef int (*Altera_clk_fn)( int assert_clk, int flush, int cookie ); +typedef int (*Altera_data_fn)( int assert_data, int flush, int cookie ); +typedef int (*Altera_abort_fn)( int cookie ); +typedef int (*Altera_post_fn)( int cookie ); -#endif /* _ALTERA_H_ */ +#endif /* _ALTERA_H_ */ diff --git a/include/asm-mips/au1x00.h b/include/asm-mips/au1x00.h new file mode 100644 index 000000000..5a0036845 --- /dev/null +++ b/include/asm-mips/au1x00.h @@ -0,0 +1,1047 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Include file for Alchemy Semiconductor's Au1k CPU. + * + * Copyright 2000,2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or source@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + /* + * some definitions add by takuzo@sm.sony.co.jp and sato@sm.sony.co.jp + */ + +#ifndef _AU1X00_H_ +#define _AU1X00_H_ + +#ifndef __ASSEMBLY__ +/* cpu pipeline flush */ +void static inline au_sync(void) +{ + __asm__ volatile ("sync"); +} + +void static inline au_sync_udelay(int us) +{ + __asm__ volatile ("sync"); + udelay(us); +} + +void static inline au_writeb(u8 val, int reg) +{ + *(volatile u8 *)(reg) = val; +} + +void static inline au_writew(u16 val, int reg) +{ + *(volatile u16 *)(reg) = val; +} + +void static inline au_writel(u32 val, int reg) +{ + *(volatile u32 *)(reg) = val; +} + +static inline u8 au_readb(unsigned long port) +{ + return (*(volatile u8 *)port); +} + +static inline u16 au_readw(unsigned long port) +{ + return (*(volatile u16 *)port); +} + +static inline u32 au_readl(unsigned long port) +{ + return (*(volatile u32 *)port); +} + +/* These next three functions should be a generic part of the MIPS + * kernel (with the 'au_' removed from the name) and selected for + * processors that support the instructions. + * Taken from PPC tree. -- Dan + */ +/* Return the bit position of the most significant 1 bit in a word */ +static __inline__ int __ilog2(unsigned int x) +{ + int lz; + + asm volatile ( + ".set\tnoreorder\n\t" + ".set\tnoat\n\t" + ".set\tmips32\n\t" + "clz\t%0,%1\n\t" + ".set\tmips0\n\t" + ".set\tat\n\t" + ".set\treorder" + : "=r" (lz) + : "r" (x)); + + return 31 - lz; +} + +static __inline__ int au_ffz(unsigned int x) +{ + if ((x = ~x) == 0) + return 32; + return __ilog2(x & -x); +} + +/* + * ffs: find first bit set. This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ +static __inline__ int au_ffs(int x) +{ + return __ilog2(x & -x) + 1; +} + +#endif /* !ASSEMBLY */ + +#ifdef CONFIG_PM +/* no CP0 timer irq */ +#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) +#else +#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) +#endif + +/* SDRAM Controller */ +#define MEM_SDMODE0 0xB4000000 +#define MEM_SDMODE1 0xB4000004 +#define MEM_SDMODE2 0xB4000008 + +#define MEM_SDADDR0 0xB400000C +#define MEM_SDADDR1 0xB4000010 +#define MEM_SDADDR2 0xB4000014 + +#define MEM_SDREFCFG 0xB4000018 +#define MEM_SDPRECMD 0xB400001C +#define MEM_SDAUTOREF 0xB4000020 + +#define MEM_SDWRMD0 0xB4000024 +#define MEM_SDWRMD1 0xB4000028 +#define MEM_SDWRMD2 0xB400002C + +#define MEM_SDSLEEP 0xB4000030 +#define MEM_SDSMCKE 0xB4000034 + +/* Static Bus Controller */ +#define MEM_STCFG0 0xB4001000 +#define MEM_STTIME0 0xB4001004 +#define MEM_STADDR0 0xB4001008 + +#define MEM_STCFG1 0xB4001010 +#define MEM_STTIME1 0xB4001014 +#define MEM_STADDR1 0xB4001018 + +#define MEM_STCFG2 0xB4001020 +#define MEM_STTIME2 0xB4001024 +#define MEM_STADDR2 0xB4001028 + +#define MEM_STCFG3 0xB4001030 +#define MEM_STTIME3 0xB4001034 +#define MEM_STADDR3 0xB4001038 + +/* Interrupt Controller 0 */ +#define IC0_CFG0RD 0xB0400040 +#define IC0_CFG0SET 0xB0400040 +#define IC0_CFG0CLR 0xB0400044 + +#define IC0_CFG1RD 0xB0400048 +#define IC0_CFG1SET 0xB0400048 +#define IC0_CFG1CLR 0xB040004C + +#define IC0_CFG2RD 0xB0400050 +#define IC0_CFG2SET 0xB0400050 +#define IC0_CFG2CLR 0xB0400054 + +#define IC0_REQ0INT 0xB0400054 +#define IC0_SRCRD 0xB0400058 +#define IC0_SRCSET 0xB0400058 +#define IC0_SRCCLR 0xB040005C +#define IC0_REQ1INT 0xB040005C + +#define IC0_ASSIGNRD 0xB0400060 +#define IC0_ASSIGNSET 0xB0400060 +#define IC0_ASSIGNCLR 0xB0400064 + +#define IC0_WAKERD 0xB0400068 +#define IC0_WAKESET 0xB0400068 +#define IC0_WAKECLR 0xB040006C + +#define IC0_MASKRD 0xB0400070 +#define IC0_MASKSET 0xB0400070 +#define IC0_MASKCLR 0xB0400074 + +#define IC0_RISINGRD 0xB0400078 +#define IC0_RISINGCLR 0xB0400078 +#define IC0_FALLINGRD 0xB040007C +#define IC0_FALLINGCLR 0xB040007C + +#define IC0_TESTBIT 0xB0400080 + +/* Interrupt Controller 1 */ +#define IC1_CFG0RD 0xB1800040 +#define IC1_CFG0SET 0xB1800040 +#define IC1_CFG0CLR 0xB1800044 + +#define IC1_CFG1RD 0xB1800048 +#define IC1_CFG1SET 0xB1800048 +#define IC1_CFG1CLR 0xB180004C + +#define IC1_CFG2RD 0xB1800050 +#define IC1_CFG2SET 0xB1800050 +#define IC1_CFG2CLR 0xB1800054 + +#define IC1_REQ0INT 0xB1800054 +#define IC1_SRCRD 0xB1800058 +#define IC1_SRCSET 0xB1800058 +#define IC1_SRCCLR 0xB180005C +#define IC1_REQ1INT 0xB180005C + +#define IC1_ASSIGNRD 0xB1800060 +#define IC1_ASSIGNSET 0xB1800060 +#define IC1_ASSIGNCLR 0xB1800064 + +#define IC1_WAKERD 0xB1800068 +#define IC1_WAKESET 0xB1800068 +#define IC1_WAKECLR 0xB180006C + +#define IC1_MASKRD 0xB1800070 +#define IC1_MASKSET 0xB1800070 +#define IC1_MASKCLR 0xB1800074 + +#define IC1_RISINGRD 0xB1800078 +#define IC1_RISINGCLR 0xB1800078 +#define IC1_FALLINGRD 0xB180007C +#define IC1_FALLINGCLR 0xB180007C + +#define IC1_TESTBIT 0xB1800080 + +/* Interrupt Configuration Modes */ +#define INTC_INT_DISABLED 0 +#define INTC_INT_RISE_EDGE 0x1 +#define INTC_INT_FALL_EDGE 0x2 +#define INTC_INT_RISE_AND_FALL_EDGE 0x3 +#define INTC_INT_HIGH_LEVEL 0x5 +#define INTC_INT_LOW_LEVEL 0x6 +#define INTC_INT_HIGH_AND_LOW_LEVEL 0x7 + +/* Interrupt Numbers */ +#define AU1X00_UART0_INT 0 +#define AU1000_UART1_INT 1 /* au1000 */ +#define AU1000_UART2_INT 2 /* au1000 */ + +#define AU1500_PCI_INTA 1 /* au1500 */ +#define AU1500_PCI_INTB 2 /* au1500 */ + +#define AU1X00_UART3_INT 3 + +#define AU1000_SSI0_INT 4 /* au1000 */ +#define AU1000_SSI1_INT 5 /* au1000 */ + +#define AU1500_PCI_INTC 4 /* au1500 */ +#define AU1500_PCI_INTD 5 /* au1500 */ + +#define AU1X00_DMA_INT_BASE 6 +#define AU1X00_TOY_INT 14 +#define AU1X00_TOY_MATCH0_INT 15 +#define AU1X00_TOY_MATCH1_INT 16 +#define AU1X00_TOY_MATCH2_INT 17 +#define AU1X00_RTC_INT 18 +#define AU1X00_RTC_MATCH0_INT 19 +#define AU1X00_RTC_MATCH1_INT 20 +#define AU1X00_RTC_MATCH2_INT 21 +#define AU1000_IRDA_TX_INT 22 /* au1000 */ +#define AU1000_IRDA_RX_INT 23 /* au1000 */ +#define AU1X00_USB_DEV_REQ_INT 24 +#define AU1X00_USB_DEV_SUS_INT 25 +#define AU1X00_USB_HOST_INT 26 +#define AU1X00_ACSYNC_INT 27 +#define AU1X00_MAC0_DMA_INT 28 +#define AU1X00_MAC1_DMA_INT 29 +#define AU1X00_ETH0_IRQ AU1X00_MAC0_DMA_INT +#define AU1X00_ETH1_IRQ AU1X00_MAC1_DMA_INT +#define AU1000_I2S_UO_INT 30 /* au1000 */ +#define AU1X00_AC97C_INT 31 +#define AU1X00_LAST_INTC0_INT AU1X00_AC97C_INT +#define AU1X00_GPIO_0 32 +#define AU1X00_GPIO_1 33 +#define AU1X00_GPIO_2 34 +#define AU1X00_GPIO_3 35 +#define AU1X00_GPIO_4 36 +#define AU1X00_GPIO_5 37 +#define AU1X00_GPIO_6 38 +#define AU1X00_GPIO_7 39 +#define AU1X00_GPIO_8 40 +#define AU1X00_GPIO_9 41 +#define AU1X00_GPIO_10 42 +#define AU1X00_GPIO_11 43 +#define AU1X00_GPIO_12 44 +#define AU1X00_GPIO_13 45 +#define AU1X00_GPIO_14 46 +#define AU1X00_GPIO_15 47 + +/* Au1000 only */ +#define AU1000_GPIO_16 48 +#define AU1000_GPIO_17 49 +#define AU1000_GPIO_18 50 +#define AU1000_GPIO_19 51 +#define AU1000_GPIO_20 52 +#define AU1000_GPIO_21 53 +#define AU1000_GPIO_22 54 +#define AU1000_GPIO_23 55 +#define AU1000_GPIO_24 56 +#define AU1000_GPIO_25 57 +#define AU1000_GPIO_26 58 +#define AU1000_GPIO_27 59 +#define AU1000_GPIO_28 60 +#define AU1000_GPIO_29 61 +#define AU1000_GPIO_30 62 +#define AU1000_GPIO_31 63 + +/* Au1500 only */ +#define AU1500_GPIO_200 48 +#define AU1500_GPIO_201 49 +#define AU1500_GPIO_202 50 +#define AU1500_GPIO_203 51 +#define AU1500_GPIO_20 52 +#define AU1500_GPIO_204 53 +#define AU1500_GPIO_205 54 +#define AU1500_GPIO_23 55 +#define AU1500_GPIO_24 56 +#define AU1500_GPIO_25 57 +#define AU1500_GPIO_26 58 +#define AU1500_GPIO_27 59 +#define AU1500_GPIO_28 60 +#define AU1500_GPIO_206 61 +#define AU1500_GPIO_207 62 +#define AU1500_GPIO_208_215 63 + +#define AU1X00_MAX_INTR 63 + +#define AU1100_SD 2 +#define AU1100_GPIO_208_215 29 +/* REDEFINE SECONDARY GPIO BLOCK INTO IC1 CONTROLLER HERE */ + +/* Programmable Counters 0 and 1 */ +#define SYS_BASE 0xB1900000 +#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) +#define SYS_CNTRL_E1S (1<<23) +#define SYS_CNTRL_T1S (1<<20) +#define SYS_CNTRL_M21 (1<<19) +#define SYS_CNTRL_M11 (1<<18) +#define SYS_CNTRL_M01 (1<<17) +#define SYS_CNTRL_C1S (1<<16) +#define SYS_CNTRL_BP (1<<14) +#define SYS_CNTRL_EN1 (1<<13) +#define SYS_CNTRL_BT1 (1<<12) +#define SYS_CNTRL_EN0 (1<<11) +#define SYS_CNTRL_BT0 (1<<10) +#define SYS_CNTRL_E0 (1<<8) +#define SYS_CNTRL_E0S (1<<7) +#define SYS_CNTRL_32S (1<<5) +#define SYS_CNTRL_T0S (1<<4) +#define SYS_CNTRL_M20 (1<<3) +#define SYS_CNTRL_M10 (1<<2) +#define SYS_CNTRL_M00 (1<<1) +#define SYS_CNTRL_C0S (1<<0) + +/* Programmable Counter 0 Registers */ +#define SYS_TOYTRIM (SYS_BASE + 0) +#define SYS_TOYWRITE (SYS_BASE + 4) +#define SYS_TOYMATCH0 (SYS_BASE + 8) +#define SYS_TOYMATCH1 (SYS_BASE + 0xC) +#define SYS_TOYMATCH2 (SYS_BASE + 0x10) +#define SYS_TOYREAD (SYS_BASE + 0x40) + +/* Programmable Counter 1 Registers */ +#define SYS_RTCTRIM (SYS_BASE + 0x44) +#define SYS_RTCWRITE (SYS_BASE + 0x48) +#define SYS_RTCMATCH0 (SYS_BASE + 0x4C) +#define SYS_RTCMATCH1 (SYS_BASE + 0x50) +#define SYS_RTCMATCH2 (SYS_BASE + 0x54) +#define SYS_RTCREAD (SYS_BASE + 0x58) + +/* I2S Controller */ +#define I2S_DATA 0xB1000000 +#define I2S_DATA_MASK (0xffffff) +#define I2S_CONFIG 0xB1000004 +#define I2S_CONFIG_XU (1<<25) +#define I2S_CONFIG_XO (1<<24) +#define I2S_CONFIG_RU (1<<23) +#define I2S_CONFIG_RO (1<<22) +#define I2S_CONFIG_TR (1<<21) +#define I2S_CONFIG_TE (1<<20) +#define I2S_CONFIG_TF (1<<19) +#define I2S_CONFIG_RR (1<<18) +#define I2S_CONFIG_RE (1<<17) +#define I2S_CONFIG_RF (1<<16) +#define I2S_CONFIG_PD (1<<11) +#define I2S_CONFIG_LB (1<<10) +#define I2S_CONFIG_IC (1<<9) +#define I2S_CONFIG_FM_BIT 7 +#define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT) +#define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT) +#define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT) +#define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT) +#define I2S_CONFIG_TN (1<<6) +#define I2S_CONFIG_RN (1<<5) +#define I2S_CONFIG_SZ_BIT 0 +#define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT) + +#define I2S_CONTROL 0xB1000008 +#define I2S_CONTROL_D (1<<1) +#define I2S_CONTROL_CE (1<<0) + +/* USB Host Controller */ +/* We pass USB_OHCI_BASE to ioremap, so it needs to be a physical address */ +#define USB_OHCI_BASE 0x10100000 +#define USB_OHCI_LEN 0x00100000 +#define USB_HOST_CONFIG 0xB017fffc + +/* USB Device Controller */ +#define USBD_EP0RD 0xB0200000 +#define USBD_EP0WR 0xB0200004 +#define USBD_EP2WR 0xB0200008 +#define USBD_EP3WR 0xB020000C +#define USBD_EP4RD 0xB0200010 +#define USBD_EP5RD 0xB0200014 +#define USBD_INTEN 0xB0200018 +#define USBD_INTSTAT 0xB020001C +#define USBDEV_INT_SOF (1<<12) +#define USBDEV_INT_HF_BIT 6 +#define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT) +#define USBDEV_INT_CMPLT_BIT 0 +#define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT) +#define USBD_CONFIG 0xB0200020 +#define USBD_EP0CS 0xB0200024 +#define USBD_EP2CS 0xB0200028 +#define USBD_EP3CS 0xB020002C +#define USBD_EP4CS 0xB0200030 +#define USBD_EP5CS 0xB0200034 +#define USBDEV_CS_SU (1<<14) +#define USBDEV_CS_NAK (1<<13) +#define USBDEV_CS_ACK (1<<12) +#define USBDEV_CS_BUSY (1<<11) +#define USBDEV_CS_TSIZE_BIT 1 +#define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT) +#define USBDEV_CS_STALL (1<<0) +#define USBD_EP0RDSTAT 0xB0200040 +#define USBD_EP0WRSTAT 0xB0200044 +#define USBD_EP2WRSTAT 0xB0200048 +#define USBD_EP3WRSTAT 0xB020004C +#define USBD_EP4RDSTAT 0xB0200050 +#define USBD_EP5RDSTAT 0xB0200054 +#define USBDEV_FSTAT_FLUSH (1<<6) +#define USBDEV_FSTAT_UF (1<<5) +#define USBDEV_FSTAT_OF (1<<4) +#define USBDEV_FSTAT_FCNT_BIT 0 +#define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT) +#define USBD_ENABLE 0xB0200058 +#define USBDEV_ENABLE (1<<1) +#define USBDEV_CE (1<<0) + +/* Ethernet Controllers */ +#define AU1000_ETH0_BASE 0xB0500000 +#define AU1000_ETH1_BASE 0xB0510000 +#define AU1500_ETH0_BASE 0xB1500000 +#define AU1500_ETH1_BASE 0xB1510000 +#define AU1100_ETH0_BASE 0xB0500000 + +/* 4 byte offsets from AU1000_ETH_BASE */ +#define MAC_CONTROL 0x0 +#define MAC_RX_ENABLE (1<<2) +#define MAC_TX_ENABLE (1<<3) +#define MAC_DEF_CHECK (1<<5) +#define MAC_SET_BL(X) (((X)&0x3)<<6) +#define MAC_AUTO_PAD (1<<8) +#define MAC_DISABLE_RETRY (1<<10) +#define MAC_DISABLE_BCAST (1<<11) +#define MAC_LATE_COL (1<<12) +#define MAC_HASH_MODE (1<<13) +#define MAC_HASH_ONLY (1<<15) +#define MAC_PASS_ALL (1<<16) +#define MAC_INVERSE_FILTER (1<<17) +#define MAC_PROMISCUOUS (1<<18) +#define MAC_PASS_ALL_MULTI (1<<19) +#define MAC_FULL_DUPLEX (1<<20) +#define MAC_NORMAL_MODE 0 +#define MAC_INT_LOOPBACK (1<<21) +#define MAC_EXT_LOOPBACK (1<<22) +#define MAC_DISABLE_RX_OWN (1<<23) +#define MAC_BIG_ENDIAN (1<<30) +#define MAC_RX_ALL (1<<31) +#define MAC_ADDRESS_HIGH 0x4 +#define MAC_ADDRESS_LOW 0x8 +#define MAC_MCAST_HIGH 0xC +#define MAC_MCAST_LOW 0x10 +#define MAC_MII_CNTRL 0x14 +#define MAC_MII_BUSY (1<<0) +#define MAC_MII_READ 0 +#define MAC_MII_WRITE (1<<1) +#define MAC_SET_MII_SELECT_REG(X) (((X)&0x1f)<<6) +#define MAC_SET_MII_SELECT_PHY(X) (((X)&0x1f)<<11) +#define MAC_MII_DATA 0x18 +#define MAC_FLOW_CNTRL 0x1C +#define MAC_FLOW_CNTRL_BUSY (1<<0) +#define MAC_FLOW_CNTRL_ENABLE (1<<1) +#define MAC_PASS_CONTROL (1<<2) +#define MAC_SET_PAUSE(X) (((X)&0xffff)<<16) +#define MAC_VLAN1_TAG 0x20 +#define MAC_VLAN2_TAG 0x24 + +/* Ethernet Controller Enable */ +#define AU1000_MAC0_ENABLE 0xB0520000 +#define AU1000_MAC1_ENABLE 0xB0520004 +#define AU1500_MAC0_ENABLE 0xB1520000 +#define AU1500_MAC1_ENABLE 0xB1520004 +#define AU1100_MAC0_ENABLE 0xB0520000 + +#define MAC_EN_CLOCK_ENABLE (1<<0) +#define MAC_EN_RESET0 (1<<1) +#define MAC_EN_TOSS (0<<2) +#define MAC_EN_CACHEABLE (1<<3) +#define MAC_EN_RESET1 (1<<4) +#define MAC_EN_RESET2 (1<<5) +#define MAC_DMA_RESET (1<<6) + +/* Ethernet Controller DMA Channels */ + +#define MAC0_TX_DMA_ADDR 0xB4004000 +#define MAC1_TX_DMA_ADDR 0xB4004200 +/* offsets from MAC_TX_RING_ADDR address */ +#define MAC_TX_BUFF0_STATUS 0x0 +#define TX_FRAME_ABORTED (1<<0) +#define TX_JAB_TIMEOUT (1<<1) +#define TX_NO_CARRIER (1<<2) +#define TX_LOSS_CARRIER (1<<3) +#define TX_EXC_DEF (1<<4) +#define TX_LATE_COLL_ABORT (1<<5) +#define TX_EXC_COLL (1<<6) +#define TX_UNDERRUN (1<<7) +#define TX_DEFERRED (1<<8) +#define TX_LATE_COLL (1<<9) +#define TX_COLL_CNT_MASK (0xF<<10) +#define TX_PKT_RETRY (1<<31) +#define MAC_TX_BUFF0_ADDR 0x4 +#define TX_DMA_ENABLE (1<<0) +#define TX_T_DONE (1<<1) +#define TX_GET_DMA_BUFFER(X) (((X)>>2)&0x3) +#define MAC_TX_BUFF0_LEN 0x8 +#define MAC_TX_BUFF1_STATUS 0x10 +#define MAC_TX_BUFF1_ADDR 0x14 +#define MAC_TX_BUFF1_LEN 0x18 +#define MAC_TX_BUFF2_STATUS 0x20 +#define MAC_TX_BUFF2_ADDR 0x24 +#define MAC_TX_BUFF2_LEN 0x28 +#define MAC_TX_BUFF3_STATUS 0x30 +#define MAC_TX_BUFF3_ADDR 0x34 +#define MAC_TX_BUFF3_LEN 0x38 + +#define MAC0_RX_DMA_ADDR 0xB4004100 +#define MAC1_RX_DMA_ADDR 0xB4004300 +/* offsets from MAC_RX_RING_ADDR */ +#define MAC_RX_BUFF0_STATUS 0x0 +#define RX_FRAME_LEN_MASK 0x3fff +#define RX_WDOG_TIMER (1<<14) +#define RX_RUNT (1<<15) +#define RX_OVERLEN (1<<16) +#define RX_COLL (1<<17) +#define RX_ETHER (1<<18) +#define RX_MII_ERROR (1<<19) +#define RX_DRIBBLING (1<<20) +#define RX_CRC_ERROR (1<<21) +#define RX_VLAN1 (1<<22) +#define RX_VLAN2 (1<<23) +#define RX_LEN_ERROR (1<<24) +#define RX_CNTRL_FRAME (1<<25) +#define RX_U_CNTRL_FRAME (1<<26) +#define RX_MCAST_FRAME (1<<27) +#define RX_BCAST_FRAME (1<<28) +#define RX_FILTER_FAIL (1<<29) +#define RX_PACKET_FILTER (1<<30) +#define RX_MISSED_FRAME (1<<31) + +#define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \ + RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \ + RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME) +#define MAC_RX_BUFF0_ADDR 0x4 +#define RX_DMA_ENABLE (1<<0) +#define RX_T_DONE (1<<1) +#define RX_GET_DMA_BUFFER(X) (((X)>>2)&0x3) +#define RX_SET_BUFF_ADDR(X) ((X)&0xffffffc0) +#define MAC_RX_BUFF1_STATUS 0x10 +#define MAC_RX_BUFF1_ADDR 0x14 +#define MAC_RX_BUFF2_STATUS 0x20 +#define MAC_RX_BUFF2_ADDR 0x24 +#define MAC_RX_BUFF3_STATUS 0x30 +#define MAC_RX_BUFF3_ADDR 0x34 + + +/* UARTS 0-3 */ +#define UART0_ADDR 0xB1100000 +#define UART1_ADDR 0xB1200000 +#define UART2_ADDR 0xB1300000 +#define UART3_ADDR 0xB1400000 +#define UART_BASE UART0_ADDR +#define UART_DEBUG_BASE UART2_ADDR + +#define UART_RX 0 /* Receive buffer */ +#define UART_TX 4 /* Transmit buffer */ +#define UART_IER 8 /* Interrupt Enable Register */ +#define UART_IIR 0xC /* Interrupt ID Register */ +#define UART_FCR 0x10 /* FIFO Control Register */ +#define UART_LCR 0x14 /* Line Control Register */ +#define UART_MCR 0x18 /* Modem Control Register */ +#define UART_LSR 0x1C /* Line Status Register */ +#define UART_MSR 0x20 /* Modem Status Register */ +#define UART_CLK 0x28 /* Baud Rate Clock Divider */ +#define UART_ENABLE 0x100 /* Uart enable */ + +#define UART_EN_CE 1 /* Clock enable */ +#define UART_EN_E 2 /* Enable */ + +#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ +#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ +#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ +#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ +#define UART_FCR_TRIGGER_MASK 0xF0 /* Mask for the FIFO trigger range */ +#define UART_FCR_R_TRIGGER_1 0x00 /* Mask for receive trigger set at 1 */ +#define UART_FCR_R_TRIGGER_4 0x40 /* Mask for receive trigger set at 4 */ +#define UART_FCR_R_TRIGGER_8 0x80 /* Mask for receive trigger set at 8 */ +#define UART_FCR_R_TRIGGER_14 0xA0 /* Mask for receive trigger set at 14 */ +#define UART_FCR_T_TRIGGER_0 0x00 /* Mask for transmit trigger set at 0 */ +#define UART_FCR_T_TRIGGER_4 0x10 /* Mask for transmit trigger set at 4 */ +#define UART_FCR_T_TRIGGER_8 0x20 /* Mask for transmit trigger set at 8 */ +#define UART_FCR_T_TRIGGER_12 0x30 /* Mask for transmit trigger set at 12 */ + +/* + * These are the definitions for the Line Control Register + */ +#define UART_LCR_SBC 0x40 /* Set break control */ +#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ +#define UART_LCR_EPAR 0x10 /* Even parity select */ +#define UART_LCR_PARITY 0x08 /* Parity Enable */ +#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ +#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ +#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ +#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ +#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ + +/* + * These are the definitions for the Line Status Register + */ +#define UART_LSR_TEMT 0x40 /* Transmitter empty */ +#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ +#define UART_LSR_BI 0x10 /* Break interrupt indicator */ +#define UART_LSR_FE 0x08 /* Frame error indicator */ +#define UART_LSR_PE 0x04 /* Parity error indicator */ +#define UART_LSR_OE 0x02 /* Overrun error indicator */ +#define UART_LSR_DR 0x01 /* Receiver data ready */ + +/* + * These are the definitions for the Interrupt Identification Register + */ +#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ +#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ +#define UART_IIR_MSI 0x00 /* Modem status interrupt */ +#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ +#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ +#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ + +/* + * These are the definitions for the Interrupt Enable Register + */ +#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ +#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ +#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ +#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ + +/* + * These are the definitions for the Modem Control Register + */ +#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ +#define UART_MCR_OUT2 0x08 /* Out2 complement */ +#define UART_MCR_OUT1 0x04 /* Out1 complement */ +#define UART_MCR_RTS 0x02 /* RTS complement */ +#define UART_MCR_DTR 0x01 /* DTR complement */ + +/* + * These are the definitions for the Modem Status Register + */ +#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ +#define UART_MSR_RI 0x40 /* Ring Indicator */ +#define UART_MSR_DSR 0x20 /* Data Set Ready */ +#define UART_MSR_CTS 0x10 /* Clear to Send */ +#define UART_MSR_DDCD 0x08 /* Delta DCD */ +#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ +#define UART_MSR_DDSR 0x02 /* Delta DSR */ +#define UART_MSR_DCTS 0x01 /* Delta CTS */ +#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ + + + +/* SSIO */ +#define SSI0_STATUS 0xB1600000 +#define SSI_STATUS_BF (1<<4) +#define SSI_STATUS_OF (1<<3) +#define SSI_STATUS_UF (1<<2) +#define SSI_STATUS_D (1<<1) +#define SSI_STATUS_B (1<<0) +#define SSI0_INT 0xB1600004 +#define SSI_INT_OI (1<<3) +#define SSI_INT_UI (1<<2) +#define SSI_INT_DI (1<<1) +#define SSI0_INT_ENABLE 0xB1600008 +#define SSI_INTE_OIE (1<<3) +#define SSI_INTE_UIE (1<<2) +#define SSI_INTE_DIE (1<<1) +#define SSI0_CONFIG 0xB1600020 +#define SSI_CONFIG_AO (1<<24) +#define SSI_CONFIG_DO (1<<23) +#define SSI_CONFIG_ALEN_BIT 20 +#define SSI_CONFIG_ALEN_MASK (0x7<<20) +#define SSI_CONFIG_DLEN_BIT 16 +#define SSI_CONFIG_DLEN_MASK (0x7<<16) +#define SSI_CONFIG_DD (1<<11) +#define SSI_CONFIG_AD (1<<10) +#define SSI_CONFIG_BM_BIT 8 +#define SSI_CONFIG_BM_MASK (0x3<<8) +#define SSI_CONFIG_CE (1<<7) +#define SSI_CONFIG_DP (1<<6) +#define SSI_CONFIG_DL (1<<5) +#define SSI_CONFIG_EP (1<<4) +#define SSI0_ADATA 0xB1600024 +#define SSI_AD_D (1<<24) +#define SSI_AD_ADDR_BIT 16 +#define SSI_AD_ADDR_MASK (0xff<<16) +#define SSI_AD_DATA_BIT 0 +#define SSI_AD_DATA_MASK (0xfff<<0) +#define SSI0_CLKDIV 0xB1600028 +#define SSI0_CONTROL 0xB1600100 +#define SSI_CONTROL_CD (1<<1) +#define SSI_CONTROL_E (1<<0) + +/* SSI1 */ +#define SSI1_STATUS 0xB1680000 +#define SSI1_INT 0xB1680004 +#define SSI1_INT_ENABLE 0xB1680008 +#define SSI1_CONFIG 0xB1680020 +#define SSI1_ADATA 0xB1680024 +#define SSI1_CLKDIV 0xB1680028 +#define SSI1_ENABLE 0xB1680100 + +/* + * Register content definitions + */ +#define SSI_STATUS_BF (1<<4) +#define SSI_STATUS_OF (1<<3) +#define SSI_STATUS_UF (1<<2) +#define SSI_STATUS_D (1<<1) +#define SSI_STATUS_B (1<<0) + +/* SSI_INT */ +#define SSI_INT_OI (1<<3) +#define SSI_INT_UI (1<<2) +#define SSI_INT_DI (1<<1) + +/* SSI_INTEN */ +#define SSI_INTEN_OIE (1<<3) +#define SSI_INTEN_UIE (1<<2) +#define SSI_INTEN_DIE (1<<1) + +#define SSI_CONFIG_AO (1<<24) +#define SSI_CONFIG_DO (1<<23) +#define SSI_CONFIG_ALEN (7<<20) +#define SSI_CONFIG_DLEN (15<<16) +#define SSI_CONFIG_DD (1<<11) +#define SSI_CONFIG_AD (1<<10) +#define SSI_CONFIG_BM (3<<8) +#define SSI_CONFIG_CE (1<<7) +#define SSI_CONFIG_DP (1<<6) +#define SSI_CONFIG_DL (1<<5) +#define SSI_CONFIG_EP (1<<4) +#define SSI_CONFIG_ALEN_N(N) ((N-1)<<20) +#define SSI_CONFIG_DLEN_N(N) ((N-1)<<16) +#define SSI_CONFIG_BM_HI (0<<8) +#define SSI_CONFIG_BM_LO (1<<8) +#define SSI_CONFIG_BM_CY (2<<8) + +#define SSI_ADATA_D (1<<24) +#define SSI_ADATA_ADDR (0xFF<<16) +#define SSI_ADATA_DATA (0x0FFF) +#define SSI_ADATA_ADDR_N(N) (N<<16) + +#define SSI_ENABLE_CD (1<<1) +#define SSI_ENABLE_E (1<<0) + + +/* IrDA Controller */ +#define IRDA_BASE 0xB0300000 +#define IR_RING_PTR_STATUS (IRDA_BASE+0x00) +#define IR_RING_BASE_ADDR_H (IRDA_BASE+0x04) +#define IR_RING_BASE_ADDR_L (IRDA_BASE+0x08) +#define IR_RING_SIZE (IRDA_BASE+0x0C) +#define IR_RING_PROMPT (IRDA_BASE+0x10) +#define IR_RING_ADDR_CMPR (IRDA_BASE+0x14) +#define IR_INT_CLEAR (IRDA_BASE+0x18) +#define IR_CONFIG_1 (IRDA_BASE+0x20) +#define IR_RX_INVERT_LED (1<<0) +#define IR_TX_INVERT_LED (1<<1) +#define IR_ST (1<<2) +#define IR_SF (1<<3) +#define IR_SIR (1<<4) +#define IR_MIR (1<<5) +#define IR_FIR (1<<6) +#define IR_16CRC (1<<7) +#define IR_TD (1<<8) +#define IR_RX_ALL (1<<9) +#define IR_DMA_ENABLE (1<<10) +#define IR_RX_ENABLE (1<<11) +#define IR_TX_ENABLE (1<<12) +#define IR_LOOPBACK (1<<14) +#define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \ + IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC) +#define IR_SIR_FLAGS (IRDA_BASE+0x24) +#define IR_ENABLE (IRDA_BASE+0x28) +#define IR_RX_STATUS (1<<9) +#define IR_TX_STATUS (1<<10) +#define IR_READ_PHY_CONFIG (IRDA_BASE+0x2C) +#define IR_WRITE_PHY_CONFIG (IRDA_BASE+0x30) +#define IR_MAX_PKT_LEN (IRDA_BASE+0x34) +#define IR_RX_BYTE_CNT (IRDA_BASE+0x38) +#define IR_CONFIG_2 (IRDA_BASE+0x3C) +#define IR_MODE_INV (1<<0) +#define IR_ONE_PIN (1<<1) +#define IR_INTERFACE_CONFIG (IRDA_BASE+0x40) + +/* GPIO */ +#define SYS_PINFUNC 0xB190002C +#define SYS_PF_USB (1<<15) /* 2nd USB device/host */ +#define SYS_PF_U3 (1<<14) /* GPIO23/U3TXD */ +#define SYS_PF_U2 (1<<13) /* GPIO22/U2TXD */ +#define SYS_PF_U1 (1<<12) /* GPIO21/U1TXD */ +#define SYS_PF_SRC (1<<11) /* GPIO6/SROMCKE */ +#define SYS_PF_CK5 (1<<10) /* GPIO3/CLK5 */ +#define SYS_PF_CK4 (1<<9) /* GPIO2/CLK4 */ +#define SYS_PF_IRF (1<<8) /* GPIO15/IRFIRSEL */ +#define SYS_PF_UR3 (1<<7) /* GPIO[14:9]/UART3 */ +#define SYS_PF_I2D (1<<6) /* GPIO8/I2SDI */ +#define SYS_PF_I2S (1<<5) /* I2S/GPIO[29:31] */ +#define SYS_PF_NI2 (1<<4) /* NI2/GPIO[24:28] */ +#define SYS_PF_U0 (1<<3) /* U0TXD/GPIO20 */ +#define SYS_PF_RD (1<<2) /* IRTXD/GPIO19 */ +#define SYS_PF_A97 (1<<1) /* AC97/SSL1 */ +#define SYS_PF_S0 (1<<0) /* SSI_0/GPIO[16:18] */ +#define SYS_TRIOUTRD 0xB1900100 +#define SYS_TRIOUTCLR 0xB1900100 +#define SYS_OUTPUTRD 0xB1900108 +#define SYS_OUTPUTSET 0xB1900108 +#define SYS_OUTPUTCLR 0xB190010C +#define SYS_PINSTATERD 0xB1900110 +#define SYS_PININPUTEN 0xB1900110 + +/* GPIO2, Au1500 only */ +#define GPIO2_BASE 0xB1700000 +#define GPIO2_DIR (GPIO2_BASE + 0) +#define GPIO2_DATA_EN (GPIO2_BASE + 8) +#define GPIO2_PIN_STATE (GPIO2_BASE + 0xC) +#define GPIO2_INT_ENABLE (GPIO2_BASE + 0x10) +#define GPIO2_ENABLE (GPIO2_BASE + 0x14) + +/* Power Management */ +#define SYS_SCRATCH0 0xB1900018 +#define SYS_SCRATCH1 0xB190001C +#define SYS_WAKEMSK 0xB1900034 +#define SYS_ENDIAN 0xB1900038 +#define SYS_POWERCTRL 0xB190003C +#define SYS_WAKESRC 0xB190005C +#define SYS_SLPPWR 0xB1900078 +#define SYS_SLEEP 0xB190007C + +/* Clock Controller */ +#define SYS_FREQCTRL0 0xB1900020 +#define SYS_FC_FRDIV2_BIT 22 +#define SYS_FC_FRDIV2_MASK (0xff << FQC2_FRDIV2_BIT) +#define SYS_FC_FE2 (1<<21) +#define SYS_FC_FS2 (1<<20) +#define SYS_FC_FRDIV1_BIT 12 +#define SYS_FC_FRDIV1_MASK (0xff << FQC2_FRDIV1_BIT) +#define SYS_FC_FE1 (1<<11) +#define SYS_FC_FS1 (1<<10) +#define SYS_FC_FRDIV0_BIT 2 +#define SYS_FC_FRDIV0_MASK (0xff << FQC2_FRDIV0_BIT) +#define SYS_FC_FE0 (1<<1) +#define SYS_FC_FS0 (1<<0) +#define SYS_FREQCTRL1 0xB1900024 +#define SYS_FC_FRDIV5_BIT 22 +#define SYS_FC_FRDIV5_MASK (0xff << FQC2_FRDIV5_BIT) +#define SYS_FC_FE5 (1<<21) +#define SYS_FC_FS5 (1<<20) +#define SYS_FC_FRDIV4_BIT 12 +#define SYS_FC_FRDIV4_MASK (0xff << FQC2_FRDIV4_BIT) +#define SYS_FC_FE4 (1<<11) +#define SYS_FC_FS4 (1<<10) +#define SYS_FC_FRDIV3_BIT 2 +#define SYS_FC_FRDIV3_MASK (0xff << FQC2_FRDIV3_BIT) +#define SYS_FC_FE3 (1<<1) +#define SYS_FC_FS3 (1<<0) +#define SYS_CLKSRC 0xB1900028 +#define SYS_CS_ME1_BIT 27 +#define SYS_CS_ME1_MASK (0x7<<CSC_ME1_BIT) +#define SYS_CS_DE1 (1<<26) +#define SYS_CS_CE1 (1<<25) +#define SYS_CS_ME0_BIT 22 +#define SYS_CS_ME0_MASK (0x7<<CSC_ME0_BIT) +#define SYS_CS_DE0 (1<<21) +#define SYS_CS_CE0 (1<<20) +#define SYS_CS_MI2_BIT 17 +#define SYS_CS_MI2_MASK (0x7<<CSC_MI2_BIT) +#define SYS_CS_DI2 (1<<16) +#define SYS_CS_CI2 (1<<15) +#define SYS_CS_MUH_BIT 12 +#define SYS_CS_MUH_MASK (0x7<<CSC_MUH_BIT) +#define SYS_CS_DUH (1<<11) +#define SYS_CS_CUH (1<<10) +#define SYS_CS_MUD_BIT 7 +#define SYS_CS_MUD_MASK (0x7<<CSC_MUD_BIT) +#define SYS_CS_DUD (1<<6) +#define SYS_CS_CUD (1<<5) +#define SYS_CS_MIR_BIT 2 +#define SYS_CS_MIR_MASK (0x7<<CSC_MIR_BIT) +#define SYS_CS_DIR (1<<1) +#define SYS_CS_CIR (1<<0) + +#define SYS_CS_MUX_AUX 0x1 +#define SYS_CS_MUX_FQ0 0x2 +#define SYS_CS_MUX_FQ1 0x3 +#define SYS_CS_MUX_FQ2 0x4 +#define SYS_CS_MUX_FQ3 0x5 +#define SYS_CS_MUX_FQ4 0x6 +#define SYS_CS_MUX_FQ5 0x7 +#define SYS_CPUPLL 0xB1900060 +#define SYS_AUXPLL 0xB1900064 + +/* AC97 Controller */ +#define AC97C_CONFIG 0xB0000000 +#define AC97C_RECV_SLOTS_BIT 13 +#define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT) +#define AC97C_XMIT_SLOTS_BIT 3 +#define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT) +#define AC97C_SG (1<<2) +#define AC97C_SYNC (1<<1) +#define AC97C_RESET (1<<0) +#define AC97C_STATUS 0xB0000004 +#define AC97C_XU (1<<11) +#define AC97C_XO (1<<10) +#define AC97C_RU (1<<9) +#define AC97C_RO (1<<8) +#define AC97C_READY (1<<7) +#define AC97C_CP (1<<6) +#define AC97C_TR (1<<5) +#define AC97C_TE (1<<4) +#define AC97C_TF (1<<3) +#define AC97C_RR (1<<2) +#define AC97C_RE (1<<1) +#define AC97C_RF (1<<0) +#define AC97C_DATA 0xB0000008 +#define AC97C_CMD 0xB000000C +#define AC97C_WD_BIT 16 +#define AC97C_READ (1<<7) +#define AC97C_INDEX_MASK 0x7f +#define AC97C_CNTRL 0xB0000010 +#define AC97C_RS (1<<1) +#define AC97C_CE (1<<0) + +#ifdef CONFIG_SOC_AU1500 +/* Au1500 PCI Controller */ +#define Au1500_CFG_BASE 0xB4005000 /* virtual, kseg0 addr */ +#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0) +#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4) +#define PCI_ERROR ((1<<22) | (1<<23) | (1<<24) | (1<<25) | (1<<26) | (1<<27)) +#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8) +#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC) +#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10) +#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14) +#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18) +#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C) +#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20) +#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100) +#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104) +#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108) +#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C) +#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110) + +#define Au1500_PCI_HDR 0xB4005100 /* virtual, kseg0 addr */ + +/* All of our structures, like pci resource, have 32 bit members. + * Drivers are expected to do an ioremap on the PCI MEM resource, but it's + * hard to store 0x4 0000 0000 in a 32 bit type. We require a small patch + * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and + * (u32)Au1500_PCI_MEM_END and change those to the full 36 bit PCI MEM + * addresses. For PCI IO, it's simpler because we get to do the ioremap + * ourselves and then adjust the device's resources. + */ +#define Au1500_EXT_CFG 0x600000000 +#define Au1500_EXT_CFG_TYPE1 0x680000000 +#define Au1500_PCI_IO_START 0x500000000 +#define Au1500_PCI_IO_END 0x5000FFFFF +#define Au1500_PCI_MEM_START 0x440000000 +#define Au1500_PCI_MEM_END 0x443FFFFFF + +#define PCI_IO_START (Au1500_PCI_IO_START + 0x300) +#define PCI_IO_END (Au1500_PCI_IO_END) +#define PCI_MEM_START (Au1500_PCI_MEM_START) +#define PCI_MEM_END (Au1500_PCI_MEM_END) +#define PCI_FIRST_DEVFN (0<<3) +#define PCI_LAST_DEVFN (19<<3) + +#endif + +#if defined(CONFIG_SOC_AU1100) || (defined(CONFIG_SOC_AU1000) && !defined(CONFIG_MIPS_PB1000)) +/* no PCI bus controller */ +#define PCI_IO_START 0 +#define PCI_IO_END 0 +#define PCI_MEM_START 0 +#define PCI_MEM_END 0 +#define PCI_FIRST_DEVFN 0 +#define PCI_LAST_DEVFN 0 +#endif +#define AU1X_SOCK0_IO 0xF00000000 +#define AU1X_SOCK0_PHYS_ATTR 0xF40000000 +#define AU1X_SOCK0_PHYS_MEM 0xF80000000 + +/* pcmcia socket 1 needs external glue logic so the memory map + * differs from board to board. + */ + +/* Only for db board, not older pb */ +#define AU1X_SOCK1_IO 0xF04000000 +#define AU1X_SOCK1_PHYS_ATTR 0xF44000000 +#define AU1X_SOCK1_PHYS_MEM 0xF84000000 + +#endif diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h index 310073875..0586c53d3 100644 --- a/include/asm-mips/mipsregs.h +++ b/include/asm-mips/mipsregs.h @@ -8,6 +8,7 @@ * Modified for further R[236]000 support by Paul M. Antoine, 1996. * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2003 Maciej W. Rozycki */ #ifndef _ASM_MIPSREGS_H #define _ASM_MIPSREGS_H @@ -239,6 +240,12 @@ :"=r" (__res)); \ __res;}) +#define tlb_write_indexed() \ + __asm__ __volatile__( \ + ".set noreorder\n\t" \ + "tlbwi\n\t" \ +".set reorder") + /* * R4x00 interrupt enable / cause bits */ diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h new file mode 100644 index 000000000..7aa90b76d --- /dev/null +++ b/include/configs/dbau1x00.h @@ -0,0 +1,168 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This file contains the configuration parameters for the dbau1x00 board. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MIPS32 1 /* MIPS32 CPU core */ +#define CONFIG_DBAU1X00 1 +#define CONFIG_AU1X00 1 /* alchemy series cpu */ + +/* Also known as Merlot */ +#define CONFIG_DBAU1000 1 /* board, Hardcoded for now */ +#define CONFIG_AU1000 1 /* cpu, Hardcoded for now */ + +#define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */ + +#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ + +#define CONFIG_BAUDRATE 115200 + +/* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "addmisc=setenv bootargs $(bootargs) " \ + "console=ttyS0,$(baudrate) " \ + "panic=1\0" \ + "bootfile=/tftpboot/vmlinux.srec\0" \ + "load=tftp 80500000 $(u-boot)\0" \ + "" +/* Boot from Compact flash partition 2 as default */ +#define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;bootm" + +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \ + CFG_CMD_IDE | \ + CFG_CMD_DHCP | \ + CFG_CMD_ELF ) & \ + ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \ + CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_RUN | CFG_CMD_LOADB | CFG_CMD_ELF | \ + CFG_CMD_BDI | CFG_CMD_BEDBUG)) +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "DbAu1x00 # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args*/ + +#define CFG_MALLOC_LEN 128*1024 + +#define CFG_BOOTPARAMS_LEN 128*1024 + +#define CFG_HZ 396000000 /* FIXME causes overflow in net.c */ + +#define CFG_SDRAM_BASE 0x80000000 /* Cached addr */ + +#define CFG_LOAD_ADDR 0x81000000 /* default load address */ + +#define CFG_MEMTEST_START 0x80100000 +#define CFG_MEMTEST_END 0x80800000 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ + +#define PHYS_FLASH_1 0xbec00000 /* Flash Bank #1 */ +#define PHYS_FLASH_2 0xbfc00000 /* Flash Bank #2 */ + +/* The following #defines are needed to get flash environment right */ +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN (192 << 10) + +#define CFG_INIT_SP_OFFSET 0x400000 + +/* We boot from this flash, selected with dip switch */ +#define CFG_FLASH_BASE PHYS_FLASH_2 + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (2 * CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (2 * CFG_HZ) /* Timeout for Flash Write */ + +#define CFG_ENV_IS_NOWHERE 1 + +/* Address and size of Primary Environment Sector */ +#define CFG_ENV_ADDR 0xB0030000 +#define CFG_ENV_SIZE 0x10000 + +#define CONFIG_FLASH_16BIT + +#define CONFIG_NR_DRAM_BANKS 2 + +#define CONFIG_NET_MULTI + +#define CONFIG_MEMSIZE_IN_BYTES + +/*---ATA PCMCIA ------------------------------------*/ +#define CFG_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */ +#define CFG_PCMCIA_MEM_ADDR 0x20000000 +#define CONFIG_PCMCIA_SLOT_A + +#define CONFIG_ATAPI 1 +#define CONFIG_MAC_PARTITION 1 + +/* We run CF in "true ide" mode or a harddrive via pcmcia */ +#define CONFIG_IDE_PCMCIA 1 + +/* We only support one slot for now */ +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#undef CONFIG_IDE_LED /* LED for ide not supported */ +#undef CONFIG_IDE_RESET /* reset for ide not supported */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET 8 + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET 0 + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET 0x0100 + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 16384 +#define CFG_ICACHE_SIZE 16384 +#define CFG_CACHELINE_SIZE 32 + +#define DB1000_BCSR_ADDR 0xAE000000 + +#endif /* __CONFIG_H */ |