diff options
Diffstat (limited to 'include/ns9750_bbus.h')
| -rw-r--r-- | include/ns9750_bbus.h | 125 |
1 files changed, 0 insertions, 125 deletions
diff --git a/include/ns9750_bbus.h b/include/ns9750_bbus.h deleted file mode 100644 index 9485338f7..000000000 --- a/include/ns9750_bbus.h +++ /dev/null @@ -1,125 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: ns9750_bbus.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @Descr: Definitions for BBus usage - * @References: [1] NS9750 Hardware Reference Manual/December 2003 Chap. 10 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * - ***********************************************************************/ - -#ifndef FS_NS9750_BBUS_H -#define FS_NS9750_BBUS_H - -#define NS9750_BBUS_MODULE_BASE (0x90600000) - -#define get_bbus_reg_addr(c) \ - ((volatile unsigned int *)(NS9750_BBUS_MODULE_BASE+(unsigned int) (c))) - -/* We have support for 50 GPIO pins */ - -#define get_gpio_cfg_reg_addr(pin) \ - get_bbus_reg_addr( NS9750_BBUS_GPIO_CFG_BASE + (((pin) >> 3) * 4) ) - -/* To Read/Modify/Write a pin configuration register, use it like - set_gpio_cfg_reg_val( 12, NS9750_GPIO_CFG_FUNC_GPIO|NS9750_GPIO_CFG_OUTPUT ); - They should be wrapped by cli()/sti() */ -#define set_gpio_cfg_reg_val(pin,cfg) \ - *get_gpio_cfg_reg_addr(pin)=(*get_gpio_cfg_reg_addr((pin)) & \ - ~NS9750_GPIO_CFG_MASK((pin))) |\ - NS9750_GPIO_CFG_VAL((pin),(cfg)); - -#define NS9750_GPIO_CFG_MASK(pin) (NS9750_GPIO_CFG_VAL(pin, \ - NS9750_GPIO_CFG_MA)) -#define NS9750_GPIO_CFG_VAL(pin,cfg) ((cfg) << (((pin) % 8) * 4)) - -#define NS9750_GPIO_CFG_MA (0x0F) -#define NS9750_GPIO_CFG_INPUT (0x00) -#define NS9750_GPIO_CFG_OUTPUT (0x08) -#define NS9750_GPIO_CFG_FUNC_GPIO (0x03) -#define NS9750_GPIO_CFG_FUNC_2 (0x02) -#define NS9750_GPIO_CFG_FUNC_1 (0x01) -#define NS9750_GPIO_CFG_FUNC_0 (0x00) - -/* the register addresses */ - -#define NS9750_BBUS_MASTER_RESET (0x00) -#define NS9750_BBUS_GPIO_CFG_BASE (0x10) -#define NS9750_BBUS_GPIO_CTRL_BASE (0x30) -#define NS9750_BBUS_GPIO_STAT_BASE (0x40) -#define NS9750_BBUS_MONITOR (0x50) -#define NS9750_BBUS_DMA_INT_STAT (0x60) -#define NS9750_BBUS_DMA_INT_ENABLE (0x64) -#define NS9750_BBUS_USB_CFG (0x70) -#define NS9750_BBUS_ENDIAN_CFG (0x80) -#define NS9750_BBUS_ARM_WAKE_UP (0x90) - -/* register bit fields */ - -#define NS9750_BBUS_MASTER_RESET_UTIL (0x00000100) -#define NS9750_BBUS_MASTER_RESET_I2C (0x00000080) -#define NS9750_BBUS_MASTER_RESET_1284 (0x00000040) -#define NS9750_BBUS_MASTER_RESET_SER4 (0x00000020) -#define NS9750_BBUS_MASTER_RESET_SER3 (0x00000010) -#define NS9750_BBUS_MASTER_RESET_SER2 (0x00000008) -#define NS9750_BBUS_MASTER_RESET_SER1 (0x00000004) -#define NS9750_BBUS_MASTER_RESET_USB (0x00000002) -#define NS9750_BBUS_MASTER_RESET_DMA (0x00000001) - -/* BS9750_BBUS_DMA_INT_BINT* are valid for *DMA_INT_STAT and *DMA_INT_ENABLE */ - -#define NS9750_BBUS_DMA_INT_BINT16 (0x00010000) -#define NS9750_BBUS_DMA_INT_BINT15 (0x00008000) -#define NS9750_BBUS_DMA_INT_BINT14 (0x00004000) -#define NS9750_BBUS_DMA_INT_BINT13 (0x00002000) -#define NS9750_BBUS_DMA_INT_BINT12 (0x00001000) -#define NS9750_BBUS_DMA_INT_BINT11 (0x00000800) -#define NS9750_BBUS_DMA_INT_BINT10 (0x00000400) -#define NS9750_BBUS_DMA_INT_BINT9 (0x00000200) -#define NS9750_BBUS_DMA_INT_BINT8 (0x00000100) -#define NS9750_BBUS_DMA_INT_BINT7 (0x00000080) -#define NS9750_BBUS_DMA_INT_BINT6 (0x00000040) -#define NS9750_BBUS_DMA_INT_BINT5 (0x00000020) -#define NS9750_BBUS_DMA_INT_BINT4 (0x00000010) -#define NS9750_BBUS_DMA_INT_BINT3 (0x00000008) -#define NS9750_BBUS_DMA_INT_BINT2 (0x00000004) -#define NS9750_BBUS_DMA_INT_BINT1 (0x00000002) -#define NS9750_BBUS_DMA_INT_BINT0 (0x00000001) - -#define NS9750_BBUS_USB_CFG_OUTEN (0x00000008) -#define NS9750_BBUS_USB_CFG_SPEED (0x00000004) -#define NS9750_BBUS_USB_CFG_CFG_MA (0x00000003) -#define NS9750_BBUS_USB_CFG_CFG_HOST_SOFT (0x00000003) -#define NS9750_BBUS_USB_CFG_CFG_DEVICE (0x00000002) -#define NS9750_BBUS_USB_CFG_CFG_HOST (0x00000001) -#define NS9750_BBUS_USB_CFG_CFG_DIS (0x00000000) - -#define NS9750_BBUS_ENDIAN_CFG_AHBM (0x00001000) -#define NS9750_BBUS_ENDIAN_CFG_I2C (0x00000080) -#define NS9750_BBUS_ENDIAN_CFG_IEEE1284 (0x00000040) -#define NS9750_BBUS_ENDIAN_CFG_SER4 (0x00000020) -#define NS9750_BBUS_ENDIAN_CFG_SER3 (0x00000010) -#define NS9750_BBUS_ENDIAN_CFG_SER2 (0x00000008) -#define NS9750_BBUS_ENDIAN_CFG_SER1 (0x00000004) -#define NS9750_BBUS_ENDIAN_CFG_USB (0x00000002) -#define NS9750_BBUS_ENDIAN_CFG_DMA (0x00000001) - -#endif /* FS_NS9750_BBUS_H */ |