diff options
Diffstat (limited to 'include/faraday')
| -rw-r--r-- | include/faraday/ftwdt010_wdt.h | 106 | 
1 files changed, 106 insertions, 0 deletions
| diff --git a/include/faraday/ftwdt010_wdt.h b/include/faraday/ftwdt010_wdt.h new file mode 100644 index 000000000..31ca76811 --- /dev/null +++ b/include/faraday/ftwdt010_wdt.h @@ -0,0 +1,106 @@ +/* + * Watchdog driver for the FTWDT010 Watch Dog Driver + * + * (c) Copyright 2004 Faraday Technology Corp. (www.faraday-tech.com) + * Based on sa1100_wdt.c by Oleg Drokin <green@crimea.edu> + * Based on SoftDog driver by Alan Cox <alan@redhat.com> + * + * Copyright (C) 2011 Andes Technology Corporation + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * 27/11/2004 Initial release, Faraday. + * 12/01/2011 Port to u-boot, Macpaul Lin. + */ + +#ifndef __FTWDT010_H +#define __FTWDT010_H + +struct ftwdt010_wdt { +	unsigned int	wdcounter;	/* Counter Reg		- 0x00 */ +	unsigned int	wdload;		/* Counter Auto Reload Reg - 0x04 */ +	unsigned int	wdrestart;	/* Counter Restart Reg	- 0x08 */ +	unsigned int	wdcr;		/* Control Reg		- 0x0c */ +	unsigned int	wdstatus;	/* Status Reg		- 0x10 */ +	unsigned int	wdclear;	/* Timer Clear		- 0x14 */ +	unsigned int	wdintrlen;	/* Interrupt Length	- 0x18 */ +}; + +/* + * WDLOAD - Counter Auto Reload Register + *   The Auto Reload Register is set to 0x03EF1480 (66Mhz) by default. + *   Which means in a 66MHz system, the period of Watch Dog timer reset is + *   one second. + */ +#define FTWDT010_WDLOAD(x)		((x) & 0xffffffff) + +/* + * WDRESTART - Watch Dog Timer Counter Restart Register + *   If writing 0x5AB9 to WDRESTART register, Watch Dog timer will + *   automatically reload WDLOAD to WDCOUNTER and restart counting. + */ +#define FTWDT010_WDRESTART_MAGIC	0x5AB9 + +/* WDCR - Watch Dog Timer Control Register */ +#define FTWDT010_WDCR_ENABLE		(1 << 0) +#define FTWDT010_WDCR_RST		(1 << 1) +#define FTWDT010_WDCR_INTR		(1 << 2) +/* FTWDT010_WDCR_EXT bit: Watch Dog Timer External Signal Enable */ +#define FTWDT010_WDCR_EXT		(1 << 3) +/* FTWDT010_WDCR_CLOCK bit: Clock Source: 0: PCLK, 1: EXTCLK. + *  The clock source PCLK cannot be gated when system sleeps, even if + *  WDCLOCK bit is turned on. + * + *  Faraday's Watch Dog timer can be driven by an external clock. The + *  programmer just needs to write one to WdCR[WdClock] bit. + * + *  Note: There is a limitation between EXTCLK and PCLK: + *  EXTCLK cycle time / PCLK cycle time > 2. + *  If the system does not need an external clock, + *  just keep WdCR[WdClock] bit in its default value. + */ +#define FTWDT010_WDCR_CLOCK		(1 << 4) + +/* + * WDSTATUS - Watch Dog Timer Status Register + *   This bit is set when the counter reaches Zero + */ +#define FTWDT010_WDSTATUS(x)		((x) & 0x1) + +/* + * WDCLEAR - Watch Dog Timer Clear Register + *   Writing one to this register will clear WDSTATUS. + */ +#define FTWDT010_WDCLEAR		(1 << 0) + +/* + * WDINTRLEN - Watch Dog Timer Interrupt Length + *   This register controls the duration length of wd_rst, wd_intr and wd_ext. + *   The default value is 0xFF. + */ +#define FTWDT010_WDINTRLEN(x)		((x) & 0xff) + +/* + * Variable timeout should be set in ms. + * (CONFIG_SYS_CLK_FREQ/1000) equals 1 ms. + * WDLOAD = timeout * TIMEOUT_FACTOR. + */ +#define FTWDT010_TIMEOUT_FACTOR		(CONFIG_SYS_CLK_FREQ / 1000) /* 1 ms */ + +void ftwdt010_wdt_reset(void); +void ftwdt010_wdt_disable(void); + +#endif /* __FTWDT010_H */ |