diff options
Diffstat (limited to 'include/configs')
62 files changed, 128 insertions, 93 deletions
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index 5cb0f1e28..4cb805223 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -244,6 +244,7 @@ * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h index e3e6e75e8..cdba81d32 100644 --- a/include/configs/CANBT.h +++ b/include/configs/CANBT.h @@ -173,6 +173,7 @@ * I2C EEPROM (CAT24WC08) for environment */ #define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index ae8494d57..2b6786b9d 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -224,6 +224,7 @@ * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index 5c88c47b5..922121173 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -207,6 +207,7 @@ * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index d131aeaf4..3e7020df8 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -256,6 +256,7 @@ * I2C EEPROM (CAT24WC08) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 07c4e3599..d3000f657 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -283,6 +283,7 @@ * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index c78552bbd..d3763441e 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -259,6 +259,7 @@ * I2C EEPROM (CAT24WC32) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index 59e0778f6..07acab0c2 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -278,6 +278,7 @@ * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h index b2679e587..5b50bcf33 100644 --- a/include/configs/CPCIISER4.h +++ b/include/configs/CPCIISER4.h @@ -189,6 +189,7 @@ * I2C EEPROM (CAT24WC08) for environment */ #define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h index 96bf161aa..9ab30ecba 100644 --- a/include/configs/CRAYL1.h +++ b/include/configs/CRAYL1.h @@ -65,6 +65,7 @@ #define CONFIG_ETHADDR 00:40:a6:80:14:5 */ #define CONFIG_HARD_I2C 1 /* hardware support for i2c */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SDRAM_BANK0 1 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/DP405.h b/include/configs/DP405.h index 49ecb6f36..4423f2ab6 100644 --- a/include/configs/DP405.h +++ b/include/configs/DP405.h @@ -174,6 +174,7 @@ * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/DU405.h b/include/configs/DU405.h index cfb302331..8f1fc78bc 100644 --- a/include/configs/DU405.h +++ b/include/configs/DU405.h @@ -212,6 +212,7 @@ * I2C EEPROM (CAT24WC08) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/DU440.h b/include/configs/DU440.h index 65dc2359d..830466f7a 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -169,6 +169,7 @@ */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F #define CONFIG_I2C_MULTI_BUS 1 diff --git a/include/configs/EP1C20.h b/include/configs/EP1C20.h index 61d8e20f9..3920d3526 100644 --- a/include/configs/EP1C20.h +++ b/include/configs/EP1C20.h @@ -94,7 +94,8 @@ /*------------------------------------------------------------------------ * CONSOLE *----------------------------------------------------------------------*/ -#if defined(CONFIG_CONSOLE_JTAG) +#define CONFIG_ALTERA_UART 1 /* Use altera uart */ +#if defined(CONFIG_ALTERA_JTAG_UART) #define CONFIG_SYS_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ #else #define CONFIG_SYS_NIOS_CONSOLE 0x02120840 /* UART base addr */ @@ -123,14 +124,16 @@ * TIMEBASE -- * * The high res timer defaults to 1 msec. Since it includes the period - * registers, we can slow it down to 10 msec using TMRCNT. If the default - * period is acceptable, TMRCNT can be left undefined. + * registers, the interrupt frequency can be reduced using TMRCNT. + * If the default period is acceptable, TMRCNT can be left undefined. + * TMRMS represents the desired mecs per tick (msecs per interrupt). *----------------------------------------------------------------------*/ +#define CONFIG_SYS_HZ 1000 /* Always 1000 */ #define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ -#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */ -#define CONFIG_SYS_NIOS_TMRMS 10 /* 10 msec per tick */ -#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ/(CONFIG_SYS_NIOS_TMRCNT + 1)) +#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec)*/ +#define CONFIG_SYS_NIOS_TMRCNT \ + (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) /*------------------------------------------------------------------------ * STATUS LED -- Provides a simple blinking led. For Nios2 each board diff --git a/include/configs/EP1S10.h b/include/configs/EP1S10.h index 41e64e6d1..bfbf8c111 100644 --- a/include/configs/EP1S10.h +++ b/include/configs/EP1S10.h @@ -92,7 +92,8 @@ /*------------------------------------------------------------------------ * CONSOLE *----------------------------------------------------------------------*/ -#if defined(CONFIG_CONSOLE_JTAG) +#define CONFIG_ALTERA_UART 1 /* Use altera uart */ +#if defined(CONFIG_ALTERA_JTAG_UART) #define CONFIG_SYS_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ #else #define CONFIG_SYS_NIOS_CONSOLE 0x02120840 /* UART base addr */ @@ -118,14 +119,16 @@ * TIMEBASE -- * * The high res timer defaults to 1 msec. Since it includes the period - * registers, we can slow it down to 10 msec using TMRCNT. If the default - * period is acceptable, TMRCNT can be left undefined. + * registers, the interrupt frequency can be reduced using TMRCNT. + * If the default period is acceptable, TMRCNT can be left undefined. + * TMRMS represents the desired mecs per tick (msecs per interrupt). *----------------------------------------------------------------------*/ +#define CONFIG_SYS_HZ 1000 /* Always 1000 */ #define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ -#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */ -#define CONFIG_SYS_NIOS_TMRMS 10 /* 10 msec per tick */ -#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ/(CONFIG_SYS_NIOS_TMRCNT + 1)) +#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec)*/ +#define CONFIG_SYS_NIOS_TMRCNT \ + (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) /*------------------------------------------------------------------------ * STATUS LED -- Provides a simple blinking led. For Nios2 each board diff --git a/include/configs/EP1S40.h b/include/configs/EP1S40.h index 5b332e40e..4d905fee3 100644 --- a/include/configs/EP1S40.h +++ b/include/configs/EP1S40.h @@ -92,7 +92,8 @@ /*------------------------------------------------------------------------ * CONSOLE *----------------------------------------------------------------------*/ -#if defined(CONFIG_CONSOLE_JTAG) +#define CONFIG_ALTERA_UART 1 /* Use altera uart */ +#if defined(CONFIG_ALTERA_JTAG_UART) #define CONFIG_SYS_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ #else #define CONFIG_SYS_NIOS_CONSOLE 0x02120840 /* UART base addr */ @@ -118,14 +119,16 @@ * TIMEBASE -- * * The high res timer defaults to 1 msec. Since it includes the period - * registers, we can slow it down to 10 msec using TMRCNT. If the default - * period is acceptable, TMRCNT can be left undefined. + * registers, the interrupt frequency can be reduced using TMRCNT. + * If the default period is acceptable, TMRCNT can be left undefined. + * TMRMS represents the desired mecs per tick (msecs per interrupt). *----------------------------------------------------------------------*/ +#define CONFIG_SYS_HZ 1000 /* Always 1000 */ #define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ -#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */ -#define CONFIG_SYS_NIOS_TMRMS 10 /* 10 msec per tick */ -#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ/(CONFIG_SYS_NIOS_TMRCNT + 1)) +#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec) */ +#define CONFIG_SYS_NIOS_TMRCNT \ + (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) /*------------------------------------------------------------------------ * STATUS LED -- Provides a simple blinking led. For Nios2 each board diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h index 023f33e1e..e07f9a1dc 100644 --- a/include/configs/ERIC.h +++ b/include/configs/ERIC.h @@ -54,6 +54,7 @@ #endif /* total size of a X1240 is 2048 bytes */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/G2000.h b/include/configs/G2000.h index 6819c3e36..d2883eb8d 100644 --- a/include/configs/G2000.h +++ b/include/configs/G2000.h @@ -295,6 +295,7 @@ * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/HH405.h b/include/configs/HH405.h index 92335239d..01e0bc65e 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -331,6 +331,7 @@ * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #if 0 /* test-only */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #else diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index ea502d42c..8c6d5edff 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -244,6 +244,7 @@ * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/JSE.h b/include/configs/JSE.h index 80c70e488..98f5661a0 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -217,6 +217,7 @@ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index 4b67c9454..49a7378f2 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -132,6 +132,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_HARD_I2C 1 /* I2C hardware support */ #undef CONFIG_SOFT_I2C /* I2C !bit-banged */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed 400kHz */ #define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */ #define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index 518173aa5..e7429dd19 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -194,6 +194,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_HARD_I2C 1 /* I2C hardware support */ #undef CONFIG_SOFT_I2C /* I2C !bit-banged */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed 400kHz */ #define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */ #define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 7ac934225..7e6484ee9 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -97,6 +97,7 @@ ***************************************************************/ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 50000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 87901b3af..da4313ac3 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -413,6 +413,9 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) +#ifdef CONFIG_NAND_SPL +#define CONFIG_NS16550_MIN_FUNCTIONS +#endif #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 9b8170374..0c43b2b0c 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -284,6 +284,9 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) +#ifdef CONFIG_NAND_SPL +#define CONFIG_NS16550_MIN_FUNCTIONS +#endif #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index fed441eb3..8382e3ca8 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -177,7 +177,7 @@ #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ -#define CONFIG_SYS_PIXIS_VBOOT_MASK 0x0C /* Reset altbank mask*/ +#define CONFIG_SYS_PIXIS_VBOOT_MASK 0xC0 /* Reset altbank mask */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h index 860ec5292..55471af34 100644 --- a/include/configs/OCRTC.h +++ b/include/configs/OCRTC.h @@ -210,6 +210,7 @@ * I2C EEPROM (CAT24WC08) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h index b2e2d41f2..142471362 100644 --- a/include/configs/ORSG.h +++ b/include/configs/ORSG.h @@ -208,6 +208,7 @@ * I2C EEPROM (CAT24WC08) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 405e6d504..a9b4004c3 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -286,6 +286,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) +#ifdef CONFIG_NAND_SPL +#define CONFIG_NS16550_MIN_FUNCTIONS +#endif #define CONFIG_SERIAL_MULTI 1 /* Enable both serial ports */ #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 30a5a319b..66be725c8 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -238,7 +238,9 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy); #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ -#define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ +#define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */ + +#ifdef CONFIG_FSL_NGPIXIS #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ #ifdef CONFIG_PHYS_64BIT #define PIXIS_BASE_PHYS 0xfffdf0000ull @@ -249,59 +251,11 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ -#define PIXIS_ID 0x0 /* Board ID at offset 0 */ -#define PIXIS_VER 0x1 /* Board version at offset 1 */ -#define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ -#define PIXIS_CSR 0x3 /* PIXIS General control/status register */ -#define PIXIS_RST 0x4 /* PIXIS Reset Control register */ -#define PIXIS_PWR 0x5 /* PIXIS Power status register */ -#define PIXIS_AUX 0x6 /* Auxiliary 1 register */ -#define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ -#define PIXIS_AUX2 0x8 /* Auxiliary 2 register */ -#define PIXIS_VCTL 0x10 /* VELA Control Register */ -#define PIXIS_VSTAT 0x11 /* VELA Status Register */ -#define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ -#define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ -#define PIXIS_VCORE0 0x14 /* VELA VCORE0 Register */ -#define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ -#define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ -#define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ -#define PIXIS_VSPEED2 0x19 /* VELA VSpeed 2 */ -#define PIXIS_VSYSCLK0 0x19 /* VELA SYSCLK0 Register */ -#define PIXIS_VSYSCLK1 0x1A /* VELA SYSCLK1 Register */ -#define PIXIS_VSYSCLK2 0x1B /* VELA SYSCLK2 Register */ -#define PIXIS_VDDRCLK0 0x1C /* VELA DDRCLK0 Register */ -#define PIXIS_VDDRCLK1 0x1D /* VELA DDRCLK1 Register */ -#define PIXIS_VDDRCLK2 0x1E /* VELA DDRCLK2 Register */ - -#define PIXIS_VWATCH 0x24 /* Watchdog Register */ -#define PIXIS_LED 0x25 /* LED Register */ - -#define PIXIS_SW(x) 0x20 + (x - 1) * 2 -#define PIXIS_EN(x) 0x21 + (x - 1) * 2 -#define PIXIS_SW7_LBMAP 0xc0 /* SW7 - cfg_lbmap */ -#define PIXIS_SW7_VBANK 0x30 /* SW7 - cfg_vbank */ - -/* old pixis referenced names */ -#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ -#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ -#define CONFIG_SYS_PIXIS_VBOOT_MASK 0xc0 -#define PIXIS_VSPEED2_TSEC1SER 0x8 -#define PIXIS_VSPEED2_TSEC2SER 0x4 -#define PIXIS_VSPEED2_TSEC3SER 0x2 -#define PIXIS_VSPEED2_TSEC4SER 0x1 -#define PIXIS_VCFGEN1_TSEC1SER 0x20 -#define PIXIS_VCFGEN1_TSEC2SER 0x20 -#define PIXIS_VCFGEN1_TSEC3SER 0x20 -#define PIXIS_VCFGEN1_TSEC4SER 0x20 -#define PIXIS_VSPEED2_MASK (PIXIS_VSPEED2_TSEC1SER \ - | PIXIS_VSPEED2_TSEC2SER \ - | PIXIS_VSPEED2_TSEC3SER \ - | PIXIS_VSPEED2_TSEC4SER) -#define PIXIS_VCFGEN1_MASK (PIXIS_VCFGEN1_TSEC1SER \ - | PIXIS_VCFGEN1_TSEC2SER \ - | PIXIS_VCFGEN1_TSEC3SER \ - | PIXIS_VCFGEN1_TSEC4SER) +#define PIXIS_LBMAP_SWITCH 7 +#define PIXIS_LBMAP_MASK 0xf0 +#define PIXIS_LBMAP_SHIFT 4 +#define PIXIS_LBMAP_ALTBANK 0x20 +#endif #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h index 4e397990c..0d443ea2d 100644 --- a/include/configs/PCI405.h +++ b/include/configs/PCI405.h @@ -204,6 +204,7 @@ * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/PCI5441.h b/include/configs/PCI5441.h index 831a60d9a..c60a9f7bc 100644 --- a/include/configs/PCI5441.h +++ b/include/configs/PCI5441.h @@ -92,7 +92,8 @@ /*------------------------------------------------------------------------ * CONSOLE *----------------------------------------------------------------------*/ -#if defined(CONFIG_CONSOLE_JTAG) +#define CONFIG_ALTERA_UART 1 /* Use altera uart */ +#if defined(CONFIG_ALTERA_JTAG_UART) #define CONFIG_SYS_NIOS_CONSOLE 0x00920820 /* JTAG UART base addr */ #else #define CONFIG_SYS_NIOS_CONSOLE 0x009208a0 /* UART base addr */ @@ -113,14 +114,16 @@ * TIMEBASE -- * * The high res timer defaults to 1 msec. Since it includes the period - * registers, we can slow it down to 10 msec using TMRCNT. If the default - * period is acceptable, TMRCNT can be left undefined. + * registers, the interrupt frequency can be reduced using TMRCNT. + * If the default period is acceptable, TMRCNT can be left undefined. + * TMRMS represents the desired mecs per tick (msecs per interrupt). *----------------------------------------------------------------------*/ +#define CONFIG_SYS_HZ 1000 /* Always 1000 */ #define CONFIG_SYS_NIOS_TMRBASE 0x00920860 /* Tick timer base addr */ -#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */ -#define CONFIG_SYS_NIOS_TMRMS 10 /* 10 msec per tick */ -#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ/(CONFIG_SYS_NIOS_TMRCNT + 1)) +#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec)*/ +#define CONFIG_SYS_NIOS_TMRCNT \ + (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) /* diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 962b29e95..3e57c0b92 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -86,6 +86,7 @@ * The Atmel EEPROM uses 16Bit addressing. ***************************************************************/ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 50000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h index cf6f7a9e8..874c20b93 100644 --- a/include/configs/PK1C20.h +++ b/include/configs/PK1C20.h @@ -94,7 +94,8 @@ /*------------------------------------------------------------------------ * CONSOLE *----------------------------------------------------------------------*/ -#if defined(CONFIG_CONSOLE_JTAG) +#define CONFIG_ALTERA_UART 1 /* Use altera uart */ +#if defined(CONFIG_ALTERA_JTAG_UART) #define CONFIG_SYS_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ #else #define CONFIG_SYS_NIOS_CONSOLE 0x02120840 /* UART base addr */ @@ -123,14 +124,16 @@ * TIMEBASE -- * * The high res timer defaults to 1 msec. Since it includes the period - * registers, we can slow it down to 10 msec using TMRCNT. If the default - * period is acceptable, TMRCNT can be left undefined. + * registers, the interrupt frequency can be reduced using TMRCNT. + * If the default period is acceptable, TMRCNT can be left undefined. + * TMRMS represents the desired mecs per tick (msecs per interrupt). *----------------------------------------------------------------------*/ +#define CONFIG_SYS_HZ 1000 /* Always 1000 */ #define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ -#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */ -#define CONFIG_SYS_NIOS_TMRMS 10 /* 10 msec per tick */ -#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ/(CONFIG_SYS_NIOS_TMRCNT + 1)) +#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period */ +#define CONFIG_SYS_NIOS_TMRCNT \ + (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) /*------------------------------------------------------------------------ * STATUS LED -- Provides a simple blinking led. For Nios2 each board diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 3d59454eb..f917eb5c2 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -278,6 +278,7 @@ * I2C EEPROM (24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index 87ea7b6d4..00a12fb83 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -235,6 +235,7 @@ * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h index 7198632c3..2c048dd0d 100644 --- a/include/configs/PMC405DE.h +++ b/include/configs/PMC405DE.h @@ -215,6 +215,7 @@ * I2C EEPROM (24W16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index 89799af3f..c2fb56c6f 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -226,6 +226,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 8e9d92872..44f03dc39 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -414,6 +414,7 @@ * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 38a1d0dec..9c91fccb1 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -277,6 +277,7 @@ * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h index 4717869dd..871e4c339 100644 --- a/include/configs/VOM405.h +++ b/include/configs/VOM405.h @@ -203,6 +203,7 @@ * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h index c0179150c..f06bfe552 100644 --- a/include/configs/W7OLMC.h +++ b/include/configs/W7OLMC.h @@ -273,6 +273,7 @@ * I2C EEPROM (CAT24WC08) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h index 1d4ad13ed..be8c9f82e 100644 --- a/include/configs/W7OLMG.h +++ b/include/configs/W7OLMG.h @@ -280,6 +280,7 @@ * I2C EEPROM (ATMEL 24C04N) */ #define CONFIG_HARD_I2C 1 /* Hardware assisted I2C */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index 5c281a1a6..be9ac6261 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -241,6 +241,7 @@ * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/XPEDITE1000.h b/include/configs/XPEDITE1000.h index 658e9473b..cf39aeaaf 100644 --- a/include/configs/XPEDITE1000.h +++ b/include/configs/XPEDITE1000.h @@ -141,6 +141,7 @@ extern void out32(unsigned int, unsigned long); * I2C */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7f #define CONFIG_I2C_MULTI_BUS diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 0fed9ad68..f2392f648 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -118,6 +118,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F #define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index 8cd97b86d..13a941ef6 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -40,6 +40,7 @@ * I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SLAVE 0x7F /* diff --git a/include/configs/csb272.h b/include/configs/csb272.h index aed6f50f9..9ded33066 100644 --- a/include/configs/csb272.h +++ b/include/configs/csb272.h @@ -171,6 +171,7 @@ * */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */ #define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */ diff --git a/include/configs/csb472.h b/include/configs/csb472.h index 24b961f3e..71eb083e3 100644 --- a/include/configs/csb472.h +++ b/include/configs/csb472.h @@ -170,6 +170,7 @@ * */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */ #define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */ diff --git a/include/configs/korat.h b/include/configs/korat.h index 026dd0854..f95df684e 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -153,6 +153,7 @@ */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 011dd5c81..6461124e5 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -258,6 +258,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/meesc.h b/include/configs/meesc.h index d002b9751..e085f4a47 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -82,7 +82,6 @@ */ #include <config_cmd_default.h> #undef CONFIG_CMD_BDI -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_IMLS diff --git a/include/configs/netstal-common.h b/include/configs/netstal-common.h index 4bed7ae26..cb7efe7ab 100644 --- a/include/configs/netstal-common.h +++ b/include/configs/netstal-common.h @@ -42,6 +42,7 @@ * I2C */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/otc570.h b/include/configs/otc570.h index 4fde012c8..fb0f576f4 100644 --- a/include/configs/otc570.h +++ b/include/configs/otc570.h @@ -131,7 +131,6 @@ * Command line configuration. */ #include <config_cmd_default.h> -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_IMLS diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index 729ca6ac7..d6b92070a 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -92,6 +92,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F #define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 000ae5cd7..1f744b875 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -138,6 +138,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h index b08dcd42d..403837e14 100644 --- a/include/configs/quad100hd.h +++ b/include/configs/quad100hd.h @@ -150,6 +150,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h index 242f42fdc..429b11c19 100644 --- a/include/configs/sbc405.h +++ b/include/configs/sbc405.h @@ -166,6 +166,7 @@ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/sc3.h b/include/configs/sc3.h index a5eca3989..d00f2480c 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -251,6 +251,7 @@ */ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define I2C_INIT #define I2C_ACTIVE 0 diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index a8ba0528b..09bce6d0f 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -83,7 +83,6 @@ #undef CONFIG_CMD_FLASH #undef CONFIG_CMD_IMLS #undef CONFIG_CMD_NAND -#undef CONFIG_CMD_NET #define CONFIG_CMD_CACHE #define CONFIG_CMD_REGINFO @@ -235,4 +234,15 @@ #define CONFIG_DOS_PARTITION 1 +/* + * Ethernet Contoller driver + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_NET_MULTI +#define CONFIG_SMC911X 1 /* we have a SMC9115 on-board */ +#define CONFIG_SMC911X_16_BIT 1 /* SMC911X_16_BIT Mode */ +#define CONFIG_SMC911X_BASE 0x98800300 /* SMC911X Drive Base */ +#define CONFIG_ENV_SROM_BANK 3 /* Select SROM Bank-3 for Ethernet*/ +#endif /* CONFIG_CMD_NET */ + #endif /* __CONFIG_H */ diff --git a/include/configs/zeus.h b/include/configs/zeus.h index 1a77c7196..3b2aede4f 100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@ -167,6 +167,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F |