diff options
Diffstat (limited to 'include/configs/tricorder.h')
| -rw-r--r-- | include/configs/tricorder.h | 155 |
1 files changed, 117 insertions, 38 deletions
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index b102739a0..ac9a1dd2b 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -39,6 +39,9 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SILENT_CONSOLE +#define CONFIG_ZERO_BOOTDELAY_CHECK + /* Clock Defines */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) @@ -53,12 +56,27 @@ #define CONFIG_OF_LIBFDT /* Size of malloc() pool */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ - /* Sector */ #define CONFIG_SYS_MALLOC_LEN (1024*1024) /* Hardware drivers */ +/* GPIO support */ +#define CONFIG_OMAP_GPIO + +/* LED support */ +#define CONFIG_STATUS_LED +#define CONFIG_BOARD_SPECIFIC_LED +#define CONFIG_CMD_LED /* LED command */ +#define STATUS_LED_BIT (1 << 0) +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BIT1 (1 << 1) +#define STATUS_LED_STATE1 STATUS_LED_ON +#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BIT2 (1 << 2) +#define STATUS_LED_STATE2 STATUS_LED_ON +#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) + /* NS16550 Configuration */ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL @@ -84,6 +102,13 @@ #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_I2C_MULTI_BUS + +/* EEPROM */ +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_BUS_NUM 1 /* TWL4030 */ #define CONFIG_TWL4030_POWER @@ -92,13 +117,16 @@ /* Board NAND Info */ #define CONFIG_SYS_NO_FLASH /* no NOR flash */ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define MTDIDS_DEFAULT "nand0=nand" -#define MTDPARTS_DEFAULT "mtdparts=nand:" \ - "512k(u-boot-spl)," \ - "1920k(u-boot)," \ - "128k(u-boot-env)," \ - "4m(kernel)," \ - "-(fs)" +#define MTDIDS_DEFAULT "nand0=omap2-nand.0" +#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:" \ + "128k(SPL)," \ + "1m(u-boot)," \ + "384k(u-boot-env1)," \ + "1152k(mtdoops)," \ + "384k(u-boot-env2)," \ + "5m(kernel)," \ + "2m(fdt)," \ + "-(ubi)" #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ @@ -138,53 +166,104 @@ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_MTD_PARTITIONS -/* Environment information */ -#define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */ +/* Environment information (this is the common part) */ -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 0 -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ +/* hang() the board on panic() */ +#define CONFIG_PANIC_HANG + +/* environment placement (for NAND), is different for FLASHCARD but does not + * harm there */ +#define CONFIG_ENV_OFFSET 0x120000 /* env start */ +#define CONFIG_ENV_OFFSET_REDUND 0x2A0000 /* redundant env start */ +#define CONFIG_ENV_SIZE (16 << 10) /* use 16KiB for env */ +#define CONFIG_ENV_RANGE (384 << 10) /* allow badblocks in env */ + +/* the loadaddr is the same as CONFIG_SYS_LOAD_ADDR, unfortunately the defiend + * value can not be used here! */ +#define CONFIG_LOADADDR 0x82000000 + +#define CONFIG_COMMON_ENV_SETTINGS \ "console=ttyO2,115200n8\0" \ "mmcdev=0\0" \ - "vram=12M\0" \ - "lcdmode=800x600\0" \ + "vram=3M\0" \ "defaultdisplay=lcd\0" \ - "kernelopts=rw rootwait\0" \ + "kernelopts=mtdoops.mtddev=3\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ "commonargs=" \ "setenv bootargs console=${console} " \ + "${mtdparts} " \ + "${kernelopts} " \ + "vt.global_cursor_default=0 " \ "vram=${vram} " \ - "omapfb.mode=lcd:${lcdmode} " \ - "omapdss.def_disp=${defaultdisplay}\0" \ + "omapdss.def_disp=${defaultdisplay}\0" + +#define CONFIG_BOOTCOMMAND "run autoboot" + +/* specific environment settings for different use cases + * FLASHCARD: used to run a rdimage from sdcard to program the device + * 'NORMAL': used to boot kernel from sdcard, nand, ... + * + * The main aim for the FLASHCARD skin is to have an embedded environment + * which will not be influenced by any data already on the device. + */ +#ifdef CONFIG_FLASHCARD + +#define CONFIG_ENV_IS_NOWHERE + +/* the rdaddr is 16 MiB before the loadaddr */ +#define CONFIG_ENV_RDADDR "rdaddr=0x81000000\0" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_COMMON_ENV_SETTINGS \ + CONFIG_ENV_RDADDR \ + "autoboot=" \ + "run commonargs; " \ + "setenv bootargs ${bootargs} " \ + "flashy_updateimg=/dev/mmcblk0p1:corscience_update.img " \ + "rdinit=/sbin/init; " \ + "mmc dev ${mmcdev}; mmc rescan; " \ + "fatload mmc ${mmcdev} ${loadaddr} uImage; " \ + "fatload mmc ${mmcdev} ${rdaddr} uRamdisk; " \ + "bootm ${loadaddr} ${rdaddr}\0" + +#else /* CONFIG_FLASHCARD */ + +#define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */ + +#define CONFIG_ENV_IS_IN_NAND + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_COMMON_ENV_SETTINGS \ "mmcargs=" \ "run commonargs; " \ "setenv bootargs ${bootargs} " \ "root=/dev/mmcblk0p2 " \ - "${kernelopts}\0" \ + "rootwait " \ + "rw\0" \ "nandargs=" \ "run commonargs; " \ "setenv bootargs ${bootargs} " \ - "omapfb.mode=lcd:${lcdmode} " \ - "omapdss.def_disp=${defaultdisplay} " \ "root=ubi0:root " \ - "ubi.mtd=4 " \ + "ubi.mtd=7 " \ "rootfstype=ubifs " \ - "${kernelopts}\0" \ + "ro\0" \ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source ${loadaddr}\0" \ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ - "eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr}\0" \ - "loaduimage_ubi=mtd default; " \ - "ubi part fs; " \ + "loaduimage_ubi=ubi part ubi; " \ "ubifsmount ubi:root; " \ "ubifsload ${loadaddr} /boot/uImage\0" \ + "loaduimage_nand=nand read ${loadaddr} kernel 0x500000\0" \ "nandboot=echo Booting from nand ...; " \ "run nandargs; " \ - "run loaduimage_ubi; " \ + "run loaduimage_nand; " \ "bootm ${loadaddr}\0" \ "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ @@ -197,12 +276,12 @@ "fi; " \ "else run nandboot; fi\0" - -#define CONFIG_BOOTCOMMAND "run autoboot" +#endif /* CONFIG_FLASHCARD */ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_CMDLINE_EDITING /* enable cmdline history */ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_PROMPT "OMAP3 Tricorder # " #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ @@ -214,9 +293,9 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x07000000) +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x00000000) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ - 0x01000000) /* 16MB */ + 0x07000000) /* 112 MB */ #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000) @@ -239,9 +318,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ - #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 @@ -259,6 +335,7 @@ #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_I2C_SUPPORT @@ -277,7 +354,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ -#define CONFIG_SPL_MAX_SIZE (55 * 1024) /* 7 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (57 * 1024) /* 7 KB for stack */ #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK #define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/ @@ -301,10 +378,12 @@ #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x100000 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_SYS_MEMTEST_SCRATCH 0x81000000 #endif /* __CONFIG_H */ |