diff options
Diffstat (limited to 'include/configs/tam3517-common.h')
| -rw-r--r-- | include/configs/tam3517-common.h | 75 |
1 files changed, 68 insertions, 7 deletions
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 777f77cfc..a13fd9376 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -27,6 +27,7 @@ */ #define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP34XX /* which is a 34XX */ +#define CONFIG_OMAP_GPIO #define CONFIG_SYS_TEXT_BASE 0x80008000 @@ -47,7 +48,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ @@ -124,6 +124,7 @@ #define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_PING #define CONFIG_CMD_USB +#define CONFIG_CMD_EEPROM #undef CONFIG_CMD_FLASH /* only NAND on the SOM */ #undef CONFIG_CMD_IMLS @@ -134,6 +135,9 @@ #define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_SYS_I2C_BUS 0 #define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 #define CONFIG_DRIVER_OMAP34XX_I2C @@ -183,12 +187,6 @@ #define CONFIG_SYS_HZ 1000 /* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -/* * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ @@ -251,6 +249,7 @@ #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" @@ -352,4 +351,66 @@ "fi;" \ "else echo U-Boot not downloaded..exiting;fi\0" \ + +/* + * this is common code for all TAM3517 boards. + * MAC address is stored from manufacturer in + * I2C EEPROM + */ +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) + +/* + * The I2C EEPROM on the TAM3517 contains + * mac address and production data + */ +struct tam3517_module_info { + char customer[48]; + char product[48]; + + /* + * bit 0~47 : sequence number + * bit 48~55 : week of year, from 0. + * bit 56~63 : year + */ + unsigned long long sequence_number; + + /* + * bit 0~7 : revision fixed + * bit 8~15 : revision major + * bit 16~31 : TNxxx + */ + unsigned int revision; + unsigned char eth_addr[4][8]; + unsigned char _rev[100]; +}; + +#define TAM3517_READ_MAC_FROM_EEPROM \ +do { \ + struct tam3517_module_info info;\ + char buf[80], ethname[20]; \ + int i; \ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); \ + if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, \ + (void *)&info, sizeof(info))) \ + break; \ + memset(buf, 0, sizeof(buf)); \ + for (i = 0 ; i < ARRAY_SIZE(info.eth_addr); i++) { \ + sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X", \ + info.eth_addr[i][5], \ + info.eth_addr[i][4], \ + info.eth_addr[i][3], \ + info.eth_addr[i][2], \ + info.eth_addr[i][1], \ + info.eth_addr[i][0]); \ + \ + if (i) \ + sprintf(ethname, "eth%daddr", i); \ + else \ + sprintf(ethname, "ethaddr"); \ + printf("Setting %s from EEPROM with %s\n", ethname, buf);\ + setenv(ethname, buf); \ + } \ +} while (0) +#endif + #endif /* __TAM3517_H */ |