diff options
Diffstat (limited to 'include/configs/sorcery.h')
| -rw-r--r-- | include/configs/sorcery.h | 298 |
1 files changed, 0 insertions, 298 deletions
diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h deleted file mode 100644 index f67898e84..000000000 --- a/include/configs/sorcery.h +++ /dev/null @@ -1,298 +0,0 @@ -/* - * (C) Copyright 2004 - * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC8220 1 -#define CONFIG_SORCERY 1 /* Sorcery board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* Input clock running at 60Mhz, read Hid1 for the CPU multiplier to - determine the CPU speed. */ -#define CONFIG_SYS_MPC8220_CLKIN 60000000 /* ... running at 60MHz */ -#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 8 /* VCO multiplier can't be read from any register */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC */ - -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* PCI */ -#define CONFIG_PCI 1 -#define CONFIG_PCI_PNP 1 - -#define CONFIG_PCI_MEM_BUS 0x80000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x71000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_PCI_CFG_BUS 0x70000000 -#define CONFIG_PCI_CFG_PHYS CONFIG_PCI_CFG_BUS -#define CONFIG_PCI_CFG_SIZE 0x01000000 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - - -/* - * Default Environment - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_HOSTNAME sorcery - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs $bootargs " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask" \ - ":$hostname:$netdev:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm $kernel_addr\0" \ - "flash_self=run ramargs addip;" \ - "bootm $kernel_addr $ramdisk_addr\0" \ - "net_nfs=tftp 200000 $bootfile;run nfsargs addip;bootm\0" \ - "rootpath=/opt/eldk/ppc_82xx\0" \ - "bootfile=/tftpboot/sorcery/uImage\0" \ - "kernel_addr=FFE00000\0" \ - "ramdisk_addr=FFB00000\0" \ - "" -#define CONFIG_BOOTCOMMAND "run flash_self" - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_EEPRO100 - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_MODULE 1 -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* - * Flexbus Chipselect configuration - * Beware: Some CS# seem to be mandatory (if these CS# are not set, - * board can hang-up in unpredictable place). - * Sorcery_Memory_Map v0.3 is possibly wrong with CPLD CS# - */ - -/* Flash */ -#define CONFIG_SYS_CS0_BASE 0xf800 -#define CONFIG_SYS_CS0_MASK 0x08000000 /* 128 MB (two chips) */ -#define CONFIG_SYS_CS0_CTRL 0x001019c0 - -/* NVM */ -#define CONFIG_SYS_CS1_BASE 0xf7e8 -#define CONFIG_SYS_CS1_MASK 0x00040000 /* 256K */ -#define CONFIG_SYS_CS1_CTRL 0x00101940 /* 8bit port size */ - -/* Atlas2 + Gemini */ -#define CONFIG_SYS_CS2_BASE 0xf7e7 -#define CONFIG_SYS_CS2_MASK 0x00010000 /* 64K*/ -#define CONFIG_SYS_CS2_CTRL 0x001011c0 /* 16bit port size */ - -/* CAN Controller */ -#define CONFIG_SYS_CS3_BASE 0xf7e6 -#define CONFIG_SYS_CS3_MASK 0x00010000 /* 64K */ -#define CONFIG_SYS_CS3_CTRL 0x00102140 /* 8Bit port size */ - -/* Foreign interface */ -#define CONFIG_SYS_CS4_BASE 0xf7e5 -#define CONFIG_SYS_CS4_MASK 0x00010000 /* 64K */ -#define CONFIG_SYS_CS4_CTRL 0x00101dc0 /* 16bit port size */ - -/* CPLD */ -#define CONFIG_SYS_CS5_BASE 0xf7e4 -#define CONFIG_SYS_CS5_MASK 0x00010000 /* 64K */ -#define CONFIG_SYS_CS5_CTRL 0x001000c0 /* 16bit port size */ - -#define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16) -#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_FLASH0_BASE) - -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ - CONFIG_SYS_FLASH_BASE+0x04000000 } /* two banks */ - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x8000000 - 0x40000) -#define CONFIG_ENV_SIZE 0x4000 /* 16K */ -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + 0x20000) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -#define CONFIG_ENV_OVERWRITE 1 - -#if defined CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_EEPROM -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_SRAM_SIZE 0x8000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* SDRAM configuration (for SPD) */ -#define CONFIG_SYS_SDRAM_TOTAL_BANKS 1 -#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x50 /* 7bit */ -#define CONFIG_SYS_SDRAM_SPD_SIZE 0x100 -#define CONFIG_SYS_SDRAM_CAS_LATENCY 5 /* (CL=2.5)x2 */ - -/* SDRAM drive strength register (for SSTL_2 class II)*/ -#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_HIGH << SDRAMDS_SBE_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBA_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBS_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBD_SHIFT)) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC8220_FEC 1 -#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ -#define CONFIG_PHY_ADDR 0x1F -#define CONFIG_MII 1 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 - -/* -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE -*/ - -#endif /* __CONFIG_H */ |