diff options
Diffstat (limited to 'include/configs/redwood.h')
| -rw-r--r-- | include/configs/redwood.h | 96 |
1 files changed, 48 insertions, 48 deletions
diff --git a/include/configs/redwood.h b/include/configs/redwood.h index 35e9f8bb5..4b744a794 100644 --- a/include/configs/redwood.h +++ b/include/configs/redwood.h @@ -46,49 +46,49 @@ * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) *----------------------------------------------------------------------*/ -#define CFG_FLASH_BASE 0xfff00000 /* start of FLASH */ -#define CFG_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */ -#define CFG_ISRAM_BASE 0x90000000 /* internal SRAM */ +#define CONFIG_SYS_FLASH_BASE 0xfff00000 /* start of FLASH */ +#define CONFIG_SYS_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */ +#define CONFIG_SYS_ISRAM_BASE 0x90000000 /* internal SRAM */ -#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */ +#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ -#define CFG_PCIE_MEMBASE 0x90000000 /* mapped PCIe memory */ -#define CFG_PCIE0_MEMBASE 0x90000000 /* mapped PCIe memory */ -#define CFG_PCIE1_MEMBASE 0xa0000000 /* mapped PCIe memory */ -#define CFG_PCIE_MEMSIZE 0x01000000 +#define CONFIG_SYS_PCIE_MEMBASE 0x90000000 /* mapped PCIe memory */ +#define CONFIG_SYS_PCIE0_MEMBASE 0x90000000 /* mapped PCIe memory */ +#define CONFIG_SYS_PCIE1_MEMBASE 0xa0000000 /* mapped PCIe memory */ +#define CONFIG_SYS_PCIE_MEMSIZE 0x01000000 -#define CFG_PCIE0_XCFGBASE 0xb0000000 -#define CFG_PCIE1_XCFGBASE 0xb2000000 -#define CFG_PCIE2_XCFGBASE 0xb4000000 -#define CFG_PCIE0_CFGBASE 0xb6000000 -#define CFG_PCIE1_CFGBASE 0xb8000000 -#define CFG_PCIE2_CFGBASE 0xba000000 +#define CONFIG_SYS_PCIE0_XCFGBASE 0xb0000000 +#define CONFIG_SYS_PCIE1_XCFGBASE 0xb2000000 +#define CONFIG_SYS_PCIE2_XCFGBASE 0xb4000000 +#define CONFIG_SYS_PCIE0_CFGBASE 0xb6000000 +#define CONFIG_SYS_PCIE1_CFGBASE 0xb8000000 +#define CONFIG_SYS_PCIE2_CFGBASE 0xba000000 /* PCIe mapped UTL registers */ -#define CFG_PCIE0_REGBASE 0xd0000000 -#define CFG_PCIE1_REGBASE 0xd0010000 -#define CFG_PCIE2_REGBASE 0xd0020000 +#define CONFIG_SYS_PCIE0_REGBASE 0xd0000000 +#define CONFIG_SYS_PCIE1_REGBASE 0xd0010000 +#define CONFIG_SYS_PCIE2_REGBASE 0xd0020000 /* System RAM mapped to PCI space */ -#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE #define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) -#define CFG_FPGA_BASE 0xe2000000 /* epld */ -#define CFG_OPER_FLASH 0xe7000000 /* SRAM - OPER Flash */ +#define CONFIG_SYS_FPGA_BASE 0xe2000000 /* epld */ +#define CONFIG_SYS_OPER_FLASH 0xe7000000 /* SRAM - OPER Flash */ /*----------------------------------------------------------------------- * Initial RAM & stack pointer (placed in internal SRAM) *----------------------------------------------------------------------*/ -#define CFG_TEMP_STACK_OCM 1 -#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE -#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */ -#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ -#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CONFIG_SYS_TEMP_STACK_OCM 1 +#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ +#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) -#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR /*----------------------------------------------------------------------- * DDR SDRAM @@ -96,7 +96,7 @@ #define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ #define CONFIG_DDR_ECC 1 /* with ECC support */ -#define CFG_SPD_MAX_DIMMS 2 +#define CONFIG_SYS_SPD_MAX_DIMMS 2 /* SPD i2c spd addresses */ #define SPD_EEPROM_ADDRESS {IIC0_DIMM0_ADDR, IIC0_DIMM1_ADDR} @@ -106,22 +106,22 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CFG_I2C_SPEED 400000 /* I2C speed */ +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */ #define IIC0_BOOTPROM_ADDR 0x50 #define IIC0_ALT_BOOTPROM_ADDR 0x54 /* Don't probe these addrs */ -#define CFG_I2C_NOPROBES {0x50, 0x52, 0x53, 0x54} +#define CONFIG_SYS_I2C_NOPROBES {0x50, 0x52, 0x53, 0x54} -#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ /*----------------------------------------------------------------------- * Environment *----------------------------------------------------------------------*/ -#undef CFG_ENV_IS_IN_NVRAM /* ... not in NVRAM */ -#define CFG_ENV_IS_IN_FLASH 1 /* Environment uses flash */ -#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */ +#undef CONFIG_ENV_IS_IN_NVRAM /* ... not in NVRAM */ +#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment uses flash */ +#undef CONFIG_ENV_IS_IN_EEPROM /* ... not in EEPROM */ #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ @@ -164,22 +164,22 @@ /*----------------------------------------------------------------------- * FLASH related *----------------------------------------------------------------------*/ -#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CFG_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */ +#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */ -#define CFG_MAX_FLASH_BANKS 3 /* number of banks */ -#define CFG_MAX_FLASH_SECT 256 /* sectors per device */ +#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per device */ -#undef CFG_FLASH_CHECKSUM -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#undef CONFIG_SYS_FLASH_CHECKSUM +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CFG_ENV_ADDR 0xfffa0000 -#define CFG_ENV_SIZE 0x10000 /* Size of Environment vars */ -#endif /* CFG_ENV_IS_IN_FLASH */ +#ifdef CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CONFIG_ENV_ADDR 0xfffa0000 +#define CONFIG_ENV_SIZE 0x10000 /* Size of Environment vars */ +#endif /* CONFIG_ENV_IS_IN_FLASH */ /*---------------------------------------------------------------------------*/ |