diff options
Diffstat (limited to 'include/configs/ppmc7xx.h')
| -rw-r--r-- | include/configs/ppmc7xx.h | 70 |
1 files changed, 35 insertions, 35 deletions
diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h index ea15524be..072b9dd5b 100644 --- a/include/configs/ppmc7xx.h +++ b/include/configs/ppmc7xx.h @@ -1,9 +1,9 @@ /* * ppmc7xx.h * --------- - * + * * Wind River PPMC 7xx/74xx board configuration file. - * + * * By Richard Danter (richard.danter@windriver.com) * Copyright (C) 2005 Wind River Systems */ @@ -16,15 +16,15 @@ /*=================================================================== - * + * * User configurable settings - Modify to your preference - * + * *=================================================================== */ /* * Debug - * + * * DEBUG - Define this is you want extra debug info * GTREGREAD - Required to build with debug * do_bdinfo - Required to build with debug @@ -37,7 +37,7 @@ /* * CPU type - * + * * CONFIG_7xx - We have a 750 or 755 CPU * CONFIG_74xx - We have a 7400 CPU * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400) @@ -52,11 +52,11 @@ /* * Monitor configuration - * + * * CONFIG_COMMANDS - List of command sets to include in shell - * + * * The following command sets have been tested and known to work: - * + * * CFG_CMD_CACHE - Cache control commands * CFG_CMD_MEMORY - Memory display, change and test commands * CFG_CMD_FLASH - Erase and program flash @@ -91,7 +91,7 @@ /* * PCI config - * + * * CONFIG_PCI - Enable PCI bus * CONFIG_PCI_PNP - Enable Plug & Play support * CONFIG_PCI_SCAN_SHOW - Enable display of devices at startup @@ -104,7 +104,7 @@ /* * Network config - * + * * CONFIG_NET_MULTI - Support for multiple network interfaces * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM @@ -117,18 +117,18 @@ /* * Enable extra init functions - * + * * CONFIG_MISC_INIT_F - Call pre-relocation init functions * CONFIG_MISC_INIT_R - Call post relocation init functions */ #undef CONFIG_MISC_INIT_F -#define CONFIG_MISC_INIT_R +#define CONFIG_MISC_INIT_R /* * Boot config - * + * * CONFIG_BOOTCOMMAND - Command(s) to execute to auto-boot * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec) */ @@ -142,9 +142,9 @@ /*=================================================================== - * + * * Board configuration settings - You should not need to modify these - * + * *=================================================================== */ @@ -154,9 +154,9 @@ /* * Memory map - * + * * This board runs in a standard CHRP (Map-B) configuration. - * + * * Type Start End Size Width Chip Sel * ----------- ----------- ----------- ------- ------- -------- * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0 @@ -164,9 +164,9 @@ * UART 0x7C000000 RCS2 * Mailbox 0xFF000000 RCS1 * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0 - * + * * Flash sectors are laid out as follows. - * + * * Sector Start End Size Comments * ------- ----------- ----------- ------- ----------- * 0 0xFFC00000 0xFFC3FFFF 256KB @@ -193,7 +193,7 @@ /* * SDRAM config - see memory map details above. - * + * * CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero! * CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s) */ @@ -202,9 +202,9 @@ #define CFG_SDRAM_SIZE 0x04000000 -/* +/* * Flash config - see memory map details above. - * + * * CFG_FLASH_BASE - Start address of flash memory * CFG_FLASH_SIZE - Total size of contiguous flash mem * CFG_FLASH_ERASE_TOUT - Erase timeout in ms @@ -223,7 +223,7 @@ /* * Monitor config - see memory map details above - * + * * CFG_MONITOR_BASE - Base address of monitor code * CFG_MALLOC_LEN - Size of malloc pool (128KB) */ @@ -234,7 +234,7 @@ /* * Command shell settings - * + * * CFG_BARGSIZE - Boot Argument buffer size * CFG_BOOTMAPSZ - Size of app's mapped RAM at boot (Linux=8MB) * CFG_CBSIZE - Console Buffer (input) size @@ -261,10 +261,10 @@ /* * Environment config - see memory map details above - * + * * CFG_ENV_IS_IN_FLASH - The env variables are stored in flash * CFG_ENV_ADDR - Address of the sector containing env vars - * CFG_ENV_SIZE - Ammount of RAM for env vars (used to save RAM, 4KB) + * CFG_ENV_SIZE - Ammount of RAM for env vars (used to save RAM, 4KB) * CFG_ENV_SECT_SIZE - Size of sector containing env vars (32KB) */ @@ -282,7 +282,7 @@ * Since the main system RAM is initialised very early, we place the INIT_RAM * in the main system RAM just above the exception vectors. The contents are * copied to top of RAM by the init code. - * + * * CFG_INIT_RAM_ADDR - Address of Init RAM, above exception vect * CFG_INIT_RAM_END - Size of Init RAM * CFG_GBL_DATA_SIZE - Ammount of RAM to reserve for global data @@ -297,7 +297,7 @@ /* * Initial BAT config - * + * * BAT0 - System SDRAM * BAT1 - LED's and Serial Port * BAT2 - PCI Memory @@ -327,7 +327,7 @@ /* * Cache config - * + * * CFG_CACHELINE_SIZE - Size of a cache line (CPU specific) * CFG_L2 - L2 cache enabled if defined * L2_INIT - L2 cache init flags @@ -342,7 +342,7 @@ /* * Clocks config - * + * * CFG_BUS_HZ - Bus clock frequency in Hz * CFG_BUS_CLK - As above (?) * CFG_HZ - Decrementer freq in Hz @@ -355,7 +355,7 @@ /* * Serial port config - * + * * CFG_BAUDRATE_TABLE - List of valid baud rates * CFG_NS16550 - Include the NS16550 driver * CFG_NS16550_SERIAL - Include the serial (wrapper) driver @@ -398,7 +398,7 @@ /* * Extra init functions - * + * * CFG_BOARD_ASM_INIT - Call assembly init code */ @@ -407,11 +407,11 @@ /* * Boot flags - * + * * BOOTFLAG_COLD - Indicates a power-on boot * BOOTFLAG_WARM - Indicates a software reset */ - + #define BOOTFLAG_COLD 0x01 #define BOOTFLAG_WARM 0x02 |