diff options
Diffstat (limited to 'include/configs/omap5_common.h')
| -rw-r--r-- | include/configs/omap5_common.h | 192 | 
1 files changed, 27 insertions, 165 deletions
| diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h index 7662e2e74..8e82fed23 100644 --- a/include/configs/omap5_common.h +++ b/include/configs/omap5_common.h @@ -9,112 +9,59 @@   * TI OMAP5 AND DRA7XX common configuration settings   *   * SPDX-License-Identifier:	GPL-2.0+  + * + * For more details, please see the technical documents listed at + * http://www.ti.com/product/omap5432   */  #ifndef __CONFIG_OMAP5_COMMON_H  #define __CONFIG_OMAP5_COMMON_H -/* - * High Level Configuration Options - */ -#define CONFIG_OMAP	/* in a TI OMAP core */ -#define CONFIG_OMAP54XX	/* which is a 54XX */ -#define CONFIG_OMAP_GPIO -#define CONFIG_OMAP_COMMON - -/* Get CPU defs */ -#include <asm/arch/cpu.h> -#include <asm/arch/omap.h> - -/* Display CPU and Board Info */ +#define CONFIG_OMAP54XX  #define CONFIG_DISPLAY_CPUINFO  #define CONFIG_DISPLAY_BOARDINFO -  #define CONFIG_MISC_INIT_R +#define CONFIG_ARCH_CPU_INIT -#define CONFIG_OF_LIBFDT -#define CONFIG_CMD_BOOTZ +#define CONFIG_SYS_CACHELINE_SIZE	64 -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG +/* Use General purpose timer 1 */ +#define CONFIG_SYS_TIMERBASE		GPT2_BASE + +#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS + +/* Defines for SDRAM init */ +#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION +#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS +#endif + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_PALMAS_POWER +#endif + +#include <asm/arch/cpu.h> +#include <asm/arch/omap.h> -/* - * Size of malloc() pool - * Total Size Environment - 128k - * Malloc - add 256k - */  #define CONFIG_ENV_SIZE			(128 << 10) -#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (256 << 10)) -/* Vector Base */ -#define CONFIG_SYS_CA9_VECTOR_BASE	SRAM_ROM_VECT_BASE -/* - * Hardware drivers - */ +#include <configs/ti_armv7_common.h>  /* - * serial port - NS16550 compatible + * Hardware drivers   */ -#define V_NS16550_CLK			48000000 -  #define CONFIG_SYS_NS16550  #define CONFIG_SYS_NS16550_SERIAL  #define CONFIG_SYS_NS16550_REG_SIZE	(-4) -#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK - -/* CPU */ -#define CONFIG_ARCH_CPU_INIT - -/* I2C  */ -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED		100000 -#define CONFIG_SYS_I2C_SLAVE		1 -#define CONFIG_DRIVER_OMAP34XX_I2C -#define CONFIG_I2C_MULTI_BUS - -/* MMC */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_OMAP_HSMMC -#define CONFIG_DOS_PARTITION - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -/* Flash */ -#define CONFIG_SYS_NO_FLASH - -/* Cache */ -#define CONFIG_SYS_CACHELINE_SIZE	64 -#define CONFIG_SYS_CACHELINE_SHIFT	6 - -/* commands to include */ -#include <config_cmd_default.h> - -/* Enabled commands */ -#define CONFIG_CMD_EXT2		/* EXT2 Support                 */ -#define CONFIG_CMD_FAT		/* FAT support                  */ -#define CONFIG_CMD_I2C		/* I2C serial bus support	*/ -#define CONFIG_CMD_MMC		/* MMC support                  */ +#define CONFIG_SYS_NS16550_CLK		48000000 -/* Disabled commands */ +/* Per-SoC commands */  #undef CONFIG_CMD_NET  #undef CONFIG_CMD_NFS -#undef CONFIG_CMD_FPGA		/* FPGA configuration Support   */ -#undef CONFIG_CMD_IMLS		/* List all found images        */  /*   * Environment setup   */ - -#define CONFIG_BOOTDELAY	3 -#define CONFIG_ENV_VARS_UBOOT_CONFIG -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 - -#define CONFIG_ENV_OVERWRITE -  #ifndef PARTS_DEFAULT  #define PARTS_DEFAULT  #endif @@ -179,96 +126,11 @@  		"fi; " \  	"fi" -#define CONFIG_AUTO_COMPLETE		1 - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LONGHELP	/* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER	/* use "hush" command parser */ -#define CONFIG_SYS_CBSIZE		256 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \ -					sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS		16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE) - -/* - * memtest setup - */ -#define CONFIG_SYS_MEMTEST_START	0x80000000 -#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (32 << 20)) - -/* Default load address */ -#define CONFIG_SYS_LOAD_ADDR		0x80000000 - -/* Use General purpose timer 1 */ -#define CONFIG_SYS_TIMERBASE		GPT2_BASE -#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ			1000 - -/* - * SDRAM Memory Map - * Even though we use two CS all the memory - * is mapped to one contiguous block - */ -#define CONFIG_NR_DRAM_BANKS	1 - -#define CONFIG_SYS_SDRAM_BASE		0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \ -					 GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS - -/* Defines for SDRAM init */ -#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION -#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -#endif - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_PALMAS_POWER -#endif  /* Defines for SPL */ -#define CONFIG_SPL -#define CONFIG_SPL_FRAMEWORK  #define CONFIG_SPL_TEXT_BASE		0x40300350  #define CONFIG_SPL_MAX_SIZE		0x19000	/* 100K */ -#define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR  #define CONFIG_SPL_DISPLAY_PRINT - -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1 -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img" - -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT  #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" -/* - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 80E7FFC0--0x80E80000 should not be used for any - * other needs. - */ -#define CONFIG_SYS_TEXT_BASE		0x80E80000 - -/* - * BSS and malloc area 64MB into memory to allow enough - * space for the kernel at the beginning of memory - */ -#define CONFIG_SPL_BSS_START_ADDR	0x84000000 -#define CONFIG_SPL_BSS_MAX_SIZE		0x100000	/* 1 MB */ -#define CONFIG_SYS_SPL_MALLOC_START	0x84100000 -#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000	/* 1 MB */ -#define CONFIG_SPL_GPIO_SUPPORT -  #endif /* __CONFIG_OMAP5_COMMON_H */ |