diff options
Diffstat (limited to 'include/configs/ns9750dev.h')
| -rw-r--r-- | include/configs/ns9750dev.h | 211 |
1 files changed, 211 insertions, 0 deletions
diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h new file mode 100644 index 000000000..11d21b20d --- /dev/null +++ b/include/configs/ns9750dev.h @@ -0,0 +1,211 @@ +/* + * Copyright (C) 2004 by FS Forth-Systeme GmbH. + * All rights reserved. + * Markus Pietrek <mpietrek@fsforth.de> + * + * Configuation settings for the NetSilicon NS9750 DevBoard + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#define CONFIG_NS9750 1 /* in an NetSilicon NS9750 SoC */ +#define CONFIG_NS9750DEV 1 /* on an NetSilicon NS9750 DevBoard */ + +/* input clock of PLL */ +#define CONFIG_SYS_CLK_FREQ 324403200 /* Don't use PLL. SW11-4 off */ + +#define CPU_CLK_FREQ (CONFIG_SYS_CLK_FREQ/2) +#define AHB_CLK_FREQ (CONFIG_SYS_CLK_FREQ/4) +#define BBUS_CLK_FREQ (CONFIG_SYS_CLK_FREQ/8) + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ +/*@TODO #define CONFIG_STATUS_LED*/ +#define CONFIG_USE_IRQ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial + * data */ + +/* + * Hardware drivers + */ +#define CFG_NS9750_UART 1 /* use on-chip UART */ +#define CONFIG_DRIVER_NS9750_ETHERNET 1 /* use on-chip ethernet */ + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 1 /* Port B */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 38400 + +/*********************************************************** + * Command definition + ***********************************************************/ +#if 0 /* @TODO */ +#define CONFIG_COMMANDS \ + (CONFIG_CMD_DFL | \ + CFG_CMD_CACHE | \ + /*CFG_CMD_NAND |*/ \ + /*CFG_CMD_EEPROM |*/ \ + /*CFG_CMD_I2C |*/ \ + /*CFG_CMD_USB |*/ \ + CFG_CMD_REGINFO | \ + CFG_CMD_DATE | \ + CFG_CMD_ELF) +#else +#define CONFIG_COMMANDS \ + (CONFIG_CMD_BDI | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_CONSOLE | \ + CFG_CMD_LOADB | \ + CFG_CMD_LOADS | \ + CFG_CMD_MEMORY) +#endif + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 3 +/*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */ + +#define CONFIG_ETHADDR 00:04:f3:ff:ff:fb /*@TODO unset */ +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.42.30 +#define CONFIG_SERVERIP 192.168.42.1 + +/*#define CONFIG_BOOTFILE "elinos-lart" */ +/*#define CONFIG_BOOTCOMMAND "tftp; bootm" */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +/* what's this ? it's not used anywhere */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "NS9750DEV # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00000000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00780000 /* 7,5 MB in DRAM */ /* @TODO */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x00600000 /* default load address */ /* @TODO */ + +#define CFG_HZ (CPU_CLK_FREQ/64) + +/* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define NS9750_ETH_PHY_ADDRESS (0x0000) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +/* TODO */ +#define CONFIG_NR_DRAM_BANKS 2 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */ +#define PHYS_SDRAM_2 0x10000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_2_SIZE 0x00800000 /* 8 MB */ + +#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */ + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* @TODO*/ +#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ +#if 0 +#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ +#endif + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#ifdef CONFIG_AMD_LV800 +#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ +#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */ +#endif +#ifdef CONFIG_AMD_LV400 +#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ +#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */ +#endif + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */ + +/* @TODO */ +/*#define CFG_ENV_IS_IN_FLASH 1*/ +#define CFG_ENV_IS_NOWHERE +#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ + +#ifdef CONFIG_STATUS_LED + +extern void __led_init(led_id_t mask, int state); +extern void __led_toggle(led_id_t mask); +extern void __led_set(led_id_t mask, int state); + +#endif /* CONFIG_STATUS_LED */ + +#endif /* __CONFIG_H */ |