diff options
Diffstat (limited to 'include/configs/netstar.h')
| -rw-r--r-- | include/configs/netstar.h | 82 |
1 files changed, 41 insertions, 41 deletions
diff --git a/include/configs/netstar.h b/include/configs/netstar.h index 756b7c267..dda659784 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -49,7 +49,7 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ -#define CFG_CONSOLE_INFO_QUIET +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* * Physical Memory Map @@ -62,32 +62,32 @@ /* * FLASH organization */ -#define CFG_FLASH_BASE PHYS_FLASH_1 -#define CFG_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 #define PHYS_FLASH_1_SIZE (1 * 1024 * 1024) -#define CFG_MAX_FLASH_SECT 19 -#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* in ticks */ -#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) +#define CONFIG_SYS_MAX_FLASH_SECT 19 +#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* in ticks */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) -#define CFG_MONITOR_BASE PHYS_FLASH_1 -#define CFG_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* * Environment settings */ -#define CFG_ENV_IS_IN_FLASH -#define CFG_ENV_ADDR 0x4000 -#define CFG_ENV_SIZE (8 * 1024) -#define CFG_ENV_SECT_SIZE (8 * 1024) -#define CFG_ENV_ADDR_REDUND 0x6000 -#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR 0x4000 +#define CONFIG_ENV_SIZE (8 * 1024) +#define CONFIG_ENV_SECT_SIZE (8 * 1024) +#define CONFIG_ENV_ADDR_REDUND 0x6000 +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE #define CONFIG_ENV_OVERWRITE /* * Size of malloc() pool */ -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_MALLOC_LEN (4 * 1024 * 1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) /* * The stack size is set up in start.S using the settings below @@ -103,15 +103,15 @@ /* * NS16550 Configuration */ -#define CFG_NS16550 -#define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE (-4) -#define CFG_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */ -#define CFG_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */ +#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /*#define CONFIG_SKIP_RELOCATE_UBOOT*/ /*#define CONFIG_SKIP_LOWLEVEL_INIT */ @@ -119,9 +119,9 @@ /* * NAND flash */ -#define CFG_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 -#define CFG_NAND_BASE 0x04000000 + (2 << 23) +#define CONFIG_SYS_NAND_BASE 0x04000000 + (2 << 23) #define NAND_ALLOW_ERASE_ALL 1 /* @@ -168,7 +168,7 @@ #define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ -#define CFG_AUTOLOAD "n" /* No autoload */ +#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */ #define CONFIG_BOOTCOMMAND "run fboot" #define CONFIG_PREBOOT "run setup" #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -203,31 +203,31 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "# " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "# " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_AUTO_COMPLETE -#define CFG_MEMTEST_START PHYS_SDRAM_1 -#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \ - (CFG_MONITOR_LEN + CFG_MALLOC_LEN + CONFIG_STACKSIZE) +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 +#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \ + (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE) -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CFG_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */ /* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1. * This time is further subdivided by a local divisor. */ -#define CFG_TIMERBASE OMAP1510_TIMER1_BASE -#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */ -#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) +#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE +#define CONFIG_SYS_PVT 7 /* 2^(pvt+1), divide by 256 */ +#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT)) #define OMAP5910_DPLL_DIV 1 #define OMAP5910_DPLL_MUL ((CONFIG_SYS_CLK_FREQ * \ |