diff options
Diffstat (limited to 'include/configs/lwmon.h')
| -rw-r--r-- | include/configs/lwmon.h | 290 |
1 files changed, 145 insertions, 145 deletions
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index e4ee099fa..d52a5e0cf 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -73,18 +73,18 @@ #undef CONFIG_BOOTARGS /* POST support */ -#define CONFIG_POST (CFG_POST_CACHE | \ - CFG_POST_WATCHDOG | \ - CFG_POST_RTC | \ - CFG_POST_MEMORY | \ - CFG_POST_CPU | \ - CFG_POST_UART | \ - CFG_POST_ETHER | \ - CFG_POST_I2C | \ - CFG_POST_SPI | \ - CFG_POST_USB | \ - CFG_POST_SPR | \ - CFG_POST_SYSMON) +#define CONFIG_POST (CONFIG_SYS_POST_CACHE | \ + CONFIG_SYS_POST_WATCHDOG | \ + CONFIG_SYS_POST_RTC | \ + CONFIG_SYS_POST_MEMORY | \ + CONFIG_SYS_POST_CPU | \ + CONFIG_SYS_POST_UART | \ + CONFIG_SYS_POST_ETHER | \ + CONFIG_SYS_POST_I2C | \ + CONFIG_SYS_POST_SPI | \ + CONFIG_SYS_POST_USB | \ + CONFIG_SYS_POST_SPR | \ + CONFIG_SYS_POST_SYSMON) /* * Keyboard commands: @@ -135,10 +135,10 @@ "verify=no" #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ +#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ #define CONFIG_WATCHDOG 1 /* watchdog enabled */ -#define CFG_WATCHDOG_FREQ (CFG_HZ / 20) +#define CONFIG_SYS_WATCHDOG_FREQ (CONFIG_SYS_HZ / 20) #undef CONFIG_STATUS_LED /* Status LED disabled */ @@ -146,8 +146,8 @@ #undef CONFIG_HARD_I2C /* I2C with hardware support */ #define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ -#define CFG_I2C_SPEED 93000 /* 93 kHz is supposed to work */ -#define CFG_I2C_SLAVE 0xFE +#define CONFIG_SYS_I2C_SPEED 93000 /* 93 kHz is supposed to work */ +#define CONFIG_SYS_I2C_SLAVE 0xFE #ifdef CONFIG_SOFT_I2C /* @@ -209,39 +209,39 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ -#ifdef CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #endif #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */ -#define CFG_LOAD_ADDR 0x00100000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CFG_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ +#define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ /* * When the watchdog is enabled, output must be fast enough in Linux. */ #ifdef CONFIG_WATCHDOG -#define CFG_BAUDRATE_TABLE { 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 38400, 57600, 115200 } #else -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #endif /*----------------------------------------------------------------------*/ @@ -266,53 +266,53 @@ /*----------------------------------------------------------------------- * Internal Memory Mapped Register */ -#define CFG_IMMR 0xFFF00000 +#define CONFIG_SYS_IMMR 0xFFF00000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR CFG_IMMR -#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ -#define CFG_GBL_DATA_SIZE 68 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR +#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 68 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_FLASH_BASE 0x40000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_FLASH_BASE 0x40000000 #if defined(DEBUG) || defined(CONFIG_CMD_IDE) -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #else -#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ +#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ #endif -#define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 180000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 600 /* Timeout for Flash Write (in ms) */ -#define CFG_FLASH_USE_BUFFER_WRITE -#define CFG_FLASH_BUFFER_WRITE_TOUT 2048 /* Timeout for Flash Buffer Write (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 180000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 600 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_BUFFER_WRITE_TOUT 2048 /* Timeout for Flash Buffer Write (in ms) */ /* Buffer size. We have two flash devices connected in parallel. Each device incorporates a Write Buffer of 32 bytes. */ -#define CFG_FLASH_BUFFER_SIZE (2*32) +#define CONFIG_SYS_FLASH_BUFFER_SIZE (2*32) /* Put environment in flash which is much faster to boot than using the EEPROM */ #define CONFIG_ENV_IS_IN_FLASH 1 @@ -324,62 +324,62 @@ * I2C/EEPROM Configuration */ -#define CFG_I2C_AUDIO_ADDR 0x28 /* Audio volume control */ -#define CFG_I2C_SYSMON_ADDR 0x2E /* LM87 System Monitor */ -#define CFG_I2C_RTC_ADDR 0x51 /* PCF8563 RTC */ -#define CFG_I2C_POWER_A_ADDR 0x52 /* PCMCIA/USB power switch, channel A */ -#define CFG_I2C_POWER_B_ADDR 0x53 /* PCMCIA/USB power switch, channel B */ -#define CFG_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */ -#define CFG_I2C_PICIO_ADDR 0x57 /* PIC IO Expander */ +#define CONFIG_SYS_I2C_AUDIO_ADDR 0x28 /* Audio volume control */ +#define CONFIG_SYS_I2C_SYSMON_ADDR 0x2E /* LM87 System Monitor */ +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* PCF8563 RTC */ +#define CONFIG_SYS_I2C_POWER_A_ADDR 0x52 /* PCMCIA/USB power switch, channel A */ +#define CONFIG_SYS_I2C_POWER_B_ADDR 0x53 /* PCMCIA/USB power switch, channel B */ +#define CONFIG_SYS_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */ +#define CONFIG_SYS_I2C_PICIO_ADDR 0x57 /* PIC IO Expander */ #undef CONFIG_USE_FRAM /* Use FRAM instead of EEPROM */ #ifdef CONFIG_USE_FRAM /* use FRAM */ -#define CFG_I2C_EEPROM_ADDR 0x55 /* FRAM FM24CL64 */ -#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x55 /* FRAM FM24CL64 */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 #else /* use EEPROM */ -#define CFG_I2C_EEPROM_ADDR 0x58 /* EEPROM AT24C164 */ -#define CFG_I2C_EEPROM_ADDR_LEN 1 -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* takes up to 10 msec */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x58 /* EEPROM AT24C164 */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* takes up to 10 msec */ #endif /* CONFIG_USE_FRAM */ -#define CFG_EEPROM_PAGE_WRITE_BITS 4 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* List of I2C addresses to be verified by POST */ #ifdef CONFIG_USE_FRAM -#define I2C_ADDR_LIST { /* CFG_I2C_AUDIO_ADDR, */ \ - CFG_I2C_SYSMON_ADDR, \ - CFG_I2C_RTC_ADDR, \ - CFG_I2C_POWER_A_ADDR, \ - CFG_I2C_POWER_B_ADDR, \ - CFG_I2C_KEYBD_ADDR, \ - CFG_I2C_PICIO_ADDR, \ - CFG_I2C_EEPROM_ADDR, \ +#define I2C_ADDR_LIST { /* CONFIG_SYS_I2C_AUDIO_ADDR, */ \ + CONFIG_SYS_I2C_SYSMON_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR, \ + CONFIG_SYS_I2C_POWER_A_ADDR, \ + CONFIG_SYS_I2C_POWER_B_ADDR, \ + CONFIG_SYS_I2C_KEYBD_ADDR, \ + CONFIG_SYS_I2C_PICIO_ADDR, \ + CONFIG_SYS_I2C_EEPROM_ADDR, \ } #else /* Use EEPROM - which show up on 8 consequtive addresses */ -#define I2C_ADDR_LIST { /* CFG_I2C_AUDIO_ADDR, */ \ - CFG_I2C_SYSMON_ADDR, \ - CFG_I2C_RTC_ADDR, \ - CFG_I2C_POWER_A_ADDR, \ - CFG_I2C_POWER_B_ADDR, \ - CFG_I2C_KEYBD_ADDR, \ - CFG_I2C_PICIO_ADDR, \ - CFG_I2C_EEPROM_ADDR+0, \ - CFG_I2C_EEPROM_ADDR+1, \ - CFG_I2C_EEPROM_ADDR+2, \ - CFG_I2C_EEPROM_ADDR+3, \ - CFG_I2C_EEPROM_ADDR+4, \ - CFG_I2C_EEPROM_ADDR+5, \ - CFG_I2C_EEPROM_ADDR+6, \ - CFG_I2C_EEPROM_ADDR+7, \ +#define I2C_ADDR_LIST { /* CONFIG_SYS_I2C_AUDIO_ADDR, */ \ + CONFIG_SYS_I2C_SYSMON_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR, \ + CONFIG_SYS_I2C_POWER_A_ADDR, \ + CONFIG_SYS_I2C_POWER_B_ADDR, \ + CONFIG_SYS_I2C_KEYBD_ADDR, \ + CONFIG_SYS_I2C_PICIO_ADDR, \ + CONFIG_SYS_I2C_EEPROM_ADDR+0, \ + CONFIG_SYS_I2C_EEPROM_ADDR+1, \ + CONFIG_SYS_I2C_EEPROM_ADDR+2, \ + CONFIG_SYS_I2C_EEPROM_ADDR+3, \ + CONFIG_SYS_I2C_EEPROM_ADDR+4, \ + CONFIG_SYS_I2C_EEPROM_ADDR+5, \ + CONFIG_SYS_I2C_EEPROM_ADDR+6, \ + CONFIG_SYS_I2C_EEPROM_ADDR+7, \ } #endif /* CONFIG_USE_FRAM */ /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif /*----------------------------------------------------------------------- @@ -389,10 +389,10 @@ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze */ #if 0 && defined(CONFIG_WATCHDOG) /* LWMON uses external MAX706TESA WD */ -#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ +#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) #else -#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) +#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) #endif /*----------------------------------------------------------------------- @@ -402,22 +402,22 @@ */ /* EARB, DBGC and DBPC are initialised by the HCW */ /* => 0x000000C0 */ -#define CFG_SIUMCR (SIUMCR_GB5E) -/*#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) */ +#define CONFIG_SYS_SIUMCR (SIUMCR_GB5E) +/*#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) */ /*----------------------------------------------------------------------- * TBSCR - Time Base Status and Control 11-26 *----------------------------------------------------------------------- * Clear Reference Interrupt Status, Timebase freezing enabled */ -#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) +#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) /*----------------------------------------------------------------------- * PISCR - Periodic Interrupt Status and Control 11-31 *----------------------------------------------------------------------- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled */ -#define CFG_PISCR (PISCR_PS | PISCR_PITF) +#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) /*----------------------------------------------------------------------- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 @@ -426,15 +426,15 @@ * interrupt status bit, set PLL multiplication factor ! */ /* 0x00405000 */ -#define CFG_PLPRCR_MF 4 /* (4+1) * 13.2 = 66 MHz Clock */ -#define CFG_PLPRCR \ - ( (CFG_PLPRCR_MF << PLPRCR_MF_SHIFT) | \ +#define CONFIG_SYS_PLPRCR_MF 4 /* (4+1) * 13.2 = 66 MHz Clock */ +#define CONFIG_SYS_PLPRCR \ + ( (CONFIG_SYS_PLPRCR_MF << PLPRCR_MF_SHIFT) | \ PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | \ /*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL | \ PLPRCR_CSR /*| PLPRCR_LOLRE|PLPRCR_FIOPD*/ \ ) -#define CONFIG_8xx_GCLK_FREQ ((CFG_PLPRCR_MF+1)*13200000) +#define CONFIG_8xx_GCLK_FREQ ((CONFIG_SYS_PLPRCR_MF+1)*13200000) /*----------------------------------------------------------------------- * SCCR - System Clock and reset Control Register 15-27 @@ -444,7 +444,7 @@ */ #define SCCR_MASK SCCR_EBDF11 /* 0x01800000 */ -#define CFG_SCCR (SCCR_COM00 | /*SCCR_TBS|*/ \ +#define CONFIG_SYS_SCCR (SCCR_COM00 | /*SCCR_TBS|*/ \ SCCR_RTDIV | SCCR_RTSEL | \ /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \ SCCR_EBDF00 | SCCR_DFSYNC00 | \ @@ -457,41 +457,41 @@ *----------------------------------------------------------------------- */ /* 0x00C3 => 0x0003 */ -#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) +#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) /*----------------------------------------------------------------------- * RCCR - RISC Controller Configuration Register 19-4 *----------------------------------------------------------------------- */ -#define CFG_RCCR 0x0000 +#define CONFIG_SYS_RCCR 0x0000 /*----------------------------------------------------------------------- * RMDS - RISC Microcode Development Support Control Register *----------------------------------------------------------------------- */ -#define CFG_RMDS 0 +#define CONFIG_SYS_RMDS 0 /*----------------------------------------------------------------------- * * Interrupt Levels *----------------------------------------------------------------------- */ -#define CFG_CPM_INTERRUPT 13 /* SIU_LEVEL6 */ +#define CONFIG_SYS_CPM_INTERRUPT 13 /* SIU_LEVEL6 */ /*----------------------------------------------------------------------- * PCMCIA stuff *----------------------------------------------------------------------- * */ -#define CFG_PCMCIA_MEM_ADDR (0x50000000) -#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CFG_PCMCIA_DMA_ADDR (0x54000000) -#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CFG_PCMCIA_ATTRB_ADDR (0x58000000) -#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CFG_PCMCIA_IO_ADDR (0x5C000000) -#define CFG_PCMCIA_IO_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_MEM_ADDR (0x50000000) +#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_DMA_ADDR (0x54000000) +#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0x58000000) +#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_IO_ADDR (0x5C000000) +#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) /*----------------------------------------------------------------------- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) @@ -504,21 +504,21 @@ #undef CONFIG_IDE_LED /* LED for ide not supported */ #undef CONFIG_IDE_RESET /* reset for ide not supported */ -#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ -#define CFG_ATA_IDE0_OFFSET 0x0000 +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR +#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR /* Offset for data I/O */ -#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320) +#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) /* Offset for normal register accesses */ -#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320) +#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) /* Offset for alternate registers */ -#define CFG_ATA_ALT_OFFSET 0x0100 +#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 #define CONFIG_SUPPORT_VFAT /* enable VFAT support */ @@ -527,7 +527,7 @@ *----------------------------------------------------------------------- * */ -#define CFG_DER 0 +#define CONFIG_SYS_DER 0 /* * Init Memory Controller: @@ -542,22 +542,22 @@ * restrict access enough to keep SRAM working (if any) * but not too much to meddle with FLASH accesses */ -#define CFG_REMAP_OR_AM 0xFF000000 /* OR addr mask */ -#define CFG_PRELIM_OR_AM 0xFF000000 /* OR addr mask */ +#define CONFIG_SYS_REMAP_OR_AM 0xFF000000 /* OR addr mask */ +#define CONFIG_SYS_PRELIM_OR_AM 0xFF000000 /* OR addr mask */ /* FLASH timing: ACS = 00, TRLX = 0, CSNT = 1, SCY = 8, EHTR = 0 */ -#define CFG_OR_TIMING_FLASH (OR_SCY_8_CLK) +#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_8_CLK) -#define CFG_OR0_REMAP ( CFG_REMAP_OR_AM | OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \ - CFG_OR_TIMING_FLASH) -#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | OR_ACS_DIV1 | OR_BI | \ - CFG_OR_TIMING_FLASH) +#define CONFIG_SYS_OR0_REMAP ( CONFIG_SYS_REMAP_OR_AM | OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \ + CONFIG_SYS_OR_TIMING_FLASH) +#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | OR_ACS_DIV1 | OR_BI | \ + CONFIG_SYS_OR_TIMING_FLASH) /* 16 bit, bank valid */ -#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V ) +#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V ) -#define CFG_OR1_REMAP CFG_OR0_REMAP -#define CFG_OR1_PRELIM CFG_OR0_PRELIM -#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V ) +#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP +#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM +#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V ) /* * BR3/OR3: SDRAM @@ -570,8 +570,8 @@ #define SDRAM_MAX_SIZE 0x08000000 /* max 128 MB SDRAM */ -#define CFG_OR3_PRELIM (SDRAM_PRELIM_OR_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING ) -#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) +#define CONFIG_SYS_OR3_PRELIM (SDRAM_PRELIM_OR_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING ) +#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) /* * BR5/OR5: Touch Panel @@ -582,32 +582,32 @@ #define TOUCHPNL_OR_AM 0xFFFF8000 #define TOUCHPNL_TIMING OR_SCY_0_CLK -#define CFG_OR5_PRELIM (TOUCHPNL_OR_AM | OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \ +#define CONFIG_SYS_OR5_PRELIM (TOUCHPNL_OR_AM | OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \ TOUCHPNL_TIMING ) -#define CFG_BR5_PRELIM ((TOUCHPNL_BASE & BR_BA_MSK) | BR_PS_32 | BR_V ) +#define CONFIG_SYS_BR5_PRELIM ((TOUCHPNL_BASE & BR_BA_MSK) | BR_PS_32 | BR_V ) -#define CFG_MEMORY_75 -#undef CFG_MEMORY_7E -#undef CFG_MEMORY_8E +#define CONFIG_SYS_MEMORY_75 +#undef CONFIG_SYS_MEMORY_7E +#undef CONFIG_SYS_MEMORY_8E /* * Memory Periodic Timer Prescaler */ /* periodic timer for refresh */ -#define CFG_MPTPR 0x200 +#define CONFIG_SYS_MPTPR 0x200 /* * MAMR settings for SDRAM */ -#define CFG_MAMR_8COL 0x80802114 -#define CFG_MAMR_9COL 0x80904114 +#define CONFIG_SYS_MAMR_8COL 0x80802114 +#define CONFIG_SYS_MAMR_9COL 0x80904114 /* * MAR setting for SDRAM */ -#define CFG_MAR 0x00000088 +#define CONFIG_SYS_MAR 0x00000088 /* * Internal Definitions |