diff options
Diffstat (limited to 'include/configs/imx27lite.h')
| -rw-r--r-- | include/configs/imx27lite.h | 200 |
1 files changed, 4 insertions, 196 deletions
diff --git a/include/configs/imx27lite.h b/include/configs/imx27lite.h index ee749ecd2..72f6e80ed 100644 --- a/include/configs/imx27lite.h +++ b/include/configs/imx27lite.h @@ -20,158 +20,31 @@ #ifndef __CONFIG_H #define __CONFIG_H +/* include common defines/options for all imx27lite related boards */ +#include "imx27lite-common.h" /* * SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ -#define CONFIG_MX27 #define CONFIG_IMX27LITE -#define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */ -#define CONFIG_SYS_HZ 1000 - -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -/* - * Lowlevel configuration - */ -#define SDRAM_ESDCFG_REGISTER_VAL(cas) \ - (ESDCFG_TRC(10) | \ - ESDCFG_TRCD(3) | \ - ESDCFG_TCAS(cas) | \ - ESDCFG_TRRD(1) | \ - ESDCFG_TRAS(5) | \ - ESDCFG_TWR | \ - ESDCFG_TMRD(2) | \ - ESDCFG_TRP(2) | \ - ESDCFG_TXP(3)) - -#define SDRAM_ESDCTL_REGISTER_VAL \ - (ESDCTL_PRCT(0) | \ - ESDCTL_BL | \ - ESDCTL_PWDT(0) | \ - ESDCTL_SREFR(3) | \ - ESDCTL_DSIZ_32 | \ - ESDCTL_COL10 | \ - ESDCTL_ROW13 | \ - ESDCTL_SDE) - -#define SDRAM_ALL_VAL 0xf00 - -#define SDRAM_MODE_REGISTER_VAL 0x33 /* BL: 8, CAS: 3 */ -#define SDRAM_EXT_MODE_REGISTER_VAL 0x1000000 - -#define MPCTL0_VAL 0x1ef15d5 - -#define SPCTL0_VAL 0x043a1c09 - -#define CSCR_VAL 0x33f08107 - -#define PCDR0_VAL 0x120470c3 -#define PCDR1_VAL 0x03030303 -#define PCCR0_VAL 0xffffffff -#define PCCR1_VAL 0xfffffffc - -#define AIPI1_PSR0_VAL 0x20040304 -#define AIPI1_PSR1_VAL 0xdffbfcfb -#define AIPI2_PSR0_VAL 0x07ffc200 -#define AIPI2_PSR1_VAL 0xffffffff - -/* - * Memory Info - */ -/* malloc() len */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 512 * 1024) -/* reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 -/* memtest start address */ -#define CONFIG_SYS_MEMTEST_START 0xA0000000 -#define CONFIG_SYS_MEMTEST_END 0xA1000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256 * 1024) /* regular stack */ -#define PHYS_SDRAM_1 0xA0000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ - -/* - * Serial Driver info - */ -#define CONFIG_MXC_UART -#define CONFIG_SYS_MX27_UART1 -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_HOSTNAME imx27 +#define CONFIG_BOARDNAME "LogicPD imx27lite\n" /* * Flash & Environment */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -/* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 -/* Use hardware sector protection */ -#define CONFIG_SYS_FLASH_PROTECTION 1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ #define CONFIG_SYS_FLASH_SECT_SZ 0x2000 /* 8KB sect size Intel Flash */ -/* end of flash */ #define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - 0x20000) -/* CS2 Base address */ -#define PHYS_FLASH_1 0xc0000000 -/* Flash Base for U-Boot */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -/* Flash size 2MB */ #define PHYS_FLASH_SIZE 0x200000 -#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE / \ - CONFIG_SYS_FLASH_SECT_SZ) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */ #define CONFIG_ENV_SECT_SIZE 0x10000 /* Env sector Size */ -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/* - * Ethernet - */ -#define CONFIG_FEC_MXC -#define CONFIG_FEC_MXC_PHYADDR 0x1f -#define CONFIG_MII -#define CONFIG_NET_MULTI - -/* - * MTD - */ -#define CONFIG_FLASH_CFI_MTD -#define CONFIG_MTD_DEVICE - -/* - * NAND - */ -#define CONFIG_NAND_MXC -#define CONFIG_MXC_NAND_REGS_BASE 0xd8000000 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0xd8000000 -#define CONFIG_JFFS2_NAND -#define CONFIG_MXC_NAND_HWECC -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ /* * SD/MMC */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_MXC_MMC #define CONFIG_MXC_MCI_REGS_BASE 0x10014000 -#define CONFIG_DOS_PARTITION /* * MTD partitions */ -#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=mxc_nand.0" #define MTDPARTS_DEFAULT \ "mtdparts=" \ @@ -186,69 +59,4 @@ "22m(rootfs)," \ "-(userfs)" -/* - * U-Boot general configuration - */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -/* Print buffer sz */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP - -/* - * U-Boot commands - */ -#include <config_cmd_default.h> -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_FAT -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING - -#define CONFIG_BOOTDELAY 5 - -#define CONFIG_LOADADDR 0xa0800000 /* loadaddr env var */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -#define xstr(s) str(s) -#define str(s) #s - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=ttymxc0,${baudrate}\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addmisc=setenv bootargs ${bootargs}\0" \ - "u-boot=imx27/u-boot.bin\0" \ - "kernel_addr_r=a0800000\0" \ - "hostname=imx27\0" \ - "bootfile=imx27/uImage\0" \ - "rootpath=/opt/eldk-4.2-arm/arm\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "run nfsargs addip addtty addmtd addmisc;" \ - "bootm\0" \ - "bootcmd=run net_nfs\0" \ - "load=tftp ${loadaddr} ${u-boot}\0" \ - "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize};cp.b ${fileaddr} " \ - xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ - "upd=run load update\0" \ - #endif /* __CONFIG_H */ |