diff options
Diffstat (limited to 'include/configs/csb226.h')
| -rw-r--r-- | include/configs/csb226.h | 13 |
1 files changed, 8 insertions, 5 deletions
diff --git a/include/configs/csb226.h b/include/configs/csb226.h index b6c7302f5..2806b6dd0 100644 --- a/include/configs/csb226.h +++ b/include/configs/csb226.h @@ -55,12 +55,13 @@ /* * select serial console configuration */ -#define CONFIG_FFUART 1 /* we use FFUART on CSB226 */ +#define CONFIG_FFUART 1 /* we use FFUART on CSB226 */ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_BAUDRATE 19200 +#undef CONFIG_MISC_INIT_R /* not used yet */ #define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_NET) @@ -68,7 +69,7 @@ #include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "root=/dev/nfs ip=bootp console=ttyS0,19200" +#define CONFIG_BOOTARGS "console=ttyS0,19200 ip=dhcp root=/dev/nfs, ether=0,0x08000000,eth0" #define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 192.168.1.56 @@ -76,8 +77,10 @@ #define CONFIG_BOOTCOMMAND "bootm 0x40000" #define CONFIG_SHOW_BOOT_PROGRESS +#define CONFIG_CMDLINE_TAG 1 + #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -90,7 +93,7 @@ * used for the RAM copy of the uboot code * */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_MALLOC_LEN (128*1024) #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "uboot> " /* Monitor Command Prompt */ @@ -104,7 +107,7 @@ #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CFG_LOAD_ADDR 0xa7fe0000 /* default load address */ +#define CFG_LOAD_ADDR 0xa3000000 /* default load address */ /* RS: where is this documented? */ /* RS: is this where U-Boot is */ /* RS: relocated to in RAM? */ |