summaryrefslogtreecommitdiff
path: root/include/configs/csb226.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/csb226.h')
-rw-r--r--include/configs/csb226.h506
1 files changed, 0 insertions, 506 deletions
diff --git a/include/configs/csb226.h b/include/configs/csb226.h
deleted file mode 100644
index 804469bf8..000000000
--- a/include/configs/csb226.h
+++ /dev/null
@@ -1,506 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de.
- *
- * Configuration for the Cogent CSB226 board. For details see
- * http://www.cogcomp.com/csb_csb226.htm
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * include/configs/csb226.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define DEBUG 1
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
-#define CONFIG_CSB226 1 /* on a CSB226 board */
-
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
- /* for timer/console/ethernet */
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_SYS_TEXT_BASE 0x0
-/*
- * Hardware drivers
- */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_FFUART 1 /* we use FFUART on CSB226 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 19200
-#undef CONFIG_MISC_INIT_R /* not used yet */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_CACHE
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "console=ttyS0,19200 ip=192.168.1.10,192.168.1.5,,255,255,255,0,csb root=/dev/nfs, ether=0,0x08000000,eth0"
-#define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.1.56
-#define CONFIG_SERVERIP 192.168.1.5
-#define CONFIG_BOOTCOMMAND "bootm 0x40000"
-#define CONFIG_SHOW_BOOT_PROGRESS
-
-#define CONFIG_CMDLINE_TAG 1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-
-/*
- * Size of malloc() pool; this lives below the uppermost 128 KiB which are
- * used for the RAM copy of the uboot code
- *
- */
-#define CONFIG_SYS_MALLOC_LEN (128*1024)
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 128 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */
- /* RS: where is this documented? */
- /* RS: is this where U-Boot is */
- /* RS: relocated to in RAM? */
-
-#define CONFIG_SYS_HZ 1000
- /* RS: the oscillator is actually 3680130?? */
-#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */
- /* 0101000001 */
- /* ^^^^^ Memory Speed 99.53 MHz */
- /* ^^ Run Mode Speed = 2x Mem Speed */
- /* ^^ Turbo Mode Sp. = 1x Run M. Sp. */
-
-#define CONFIG_SYS_MONITOR_LEN 0x1c000 /* 112 KiB */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Network chip
- */
-#define CONFIG_CS8900
-#define CONFIG_CS8900_BUS32
-#define CONFIG_CS8900_BASE 0x08000000
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* RAM starts here */
-#define CONFIG_SYS_DRAM_SIZE 0x02000000
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1)
-
-# if 0
-/* FIXME: switch to _documented_ registers */
-/*
- * GPIO settings
- *
- * GP15 == nCS1 is 1
- * GP24 == SFRM is 1
- * GP25 == TXD is 1
- * GP33 == nCS5 is 1
- * GP39 == FFTXD is 1
- * GP41 == RTS is 1
- * GP47 == TXD is 1
- * GP49 == nPWE is 1
- * GP62 == LED_B is 1
- * GP63 == TDM_OE is 1
- * GP78 == nCS2 is 1
- * GP79 == nCS3 is 1
- * GP80 == nCS4 is 1
- */
-#define CONFIG_SYS_GPSR0_VAL 0x03008000
-#define CONFIG_SYS_GPSR1_VAL 0xC0028282
-#define CONFIG_SYS_GPSR2_VAL 0x0001C000
-
-/* GP02 == DON_RST is 0
- * GP23 == SCLK is 0
- * GP45 == USB_ACT is 0
- * GP60 == PLLEN is 0
- * GP61 == LED_A is 0
- * GP73 == SWUPD_LED is 0
- */
-#define CONFIG_SYS_GPCR0_VAL 0x00800004
-#define CONFIG_SYS_GPCR1_VAL 0x30002000
-#define CONFIG_SYS_GPCR2_VAL 0x00000100
-
-/* GP00 == DON_READY is input
- * GP01 == DON_OK is input
- * GP02 == DON_RST is output
- * GP03 == RESET_IND is input
- * GP07 == RES11 is input
- * GP09 == RES12 is input
- * GP11 == SWUPDATE is input
- * GP14 == nPOWEROK is input
- * GP15 == nCS1 is output
- * GP17 == RES22 is input
- * GP18 == RDY is input
- * GP23 == SCLK is output
- * GP24 == SFRM is output
- * GP25 == TXD is output
- * GP26 == RXD is input
- * GP32 == RES21 is input
- * GP33 == nCS5 is output
- * GP34 == FFRXD is input
- * GP35 == CTS is input
- * GP39 == FFTXD is output
- * GP41 == RTS is output
- * GP42 == USB_OK is input
- * GP45 == USB_ACT is output
- * GP46 == RXD is input
- * GP47 == TXD is output
- * GP49 == nPWE is output
- * GP58 == nCPUBUSINT is input
- * GP59 == LANINT is input
- * GP60 == PLLEN is output
- * GP61 == LED_A is output
- * GP62 == LED_B is output
- * GP63 == TDM_OE is output
- * GP64 == nDSPINT is input
- * GP65 == STRAP0 is input
- * GP67 == STRAP1 is input
- * GP69 == STRAP2 is input
- * GP70 == STRAP3 is input
- * GP71 == STRAP4 is input
- * GP73 == SWUPD_LED is output
- * GP78 == nCS2 is output
- * GP79 == nCS3 is output
- * GP80 == nCS4 is output
- */
-#define CONFIG_SYS_GPDR0_VAL 0x03808004
-#define CONFIG_SYS_GPDR1_VAL 0xF002A282
-#define CONFIG_SYS_GPDR2_VAL 0x0001C200
-
-/* GP15 == nCS1 is AF10
- * GP18 == RDY is AF01
- * GP23 == SCLK is AF10
- * GP24 == SFRM is AF10
- * GP25 == TXD is AF10
- * GP26 == RXD is AF01
- * GP33 == nCS5 is AF10
- * GP34 == FFRXD is AF01
- * GP35 == CTS is AF01
- * GP39 == FFTXD is AF10
- * GP41 == RTS is AF10
- * GP46 == RXD is AF10
- * GP47 == TXD is AF01
- * GP49 == nPWE is AF10
- * GP78 == nCS2 is AF10
- * GP79 == nCS3 is AF10
- * GP80 == nCS4 is AF10
- */
-#define CONFIG_SYS_GAFR0_L_VAL 0x80000000
-#define CONFIG_SYS_GAFR0_U_VAL 0x001A8010
-#define CONFIG_SYS_GAFR1_L_VAL 0x60088058
-#define CONFIG_SYS_GAFR1_U_VAL 0x00000008
-#define CONFIG_SYS_GAFR2_L_VAL 0xA0000000
-#define CONFIG_SYS_GAFR2_U_VAL 0x00000002
-
-
-/* FIXME: set GPIO_RER/FER */
-
-/* RDH = 1
- * PH = 1
- * VFS = 1
- * BFS = 1
- * SSS = 1
- */
-#define CONFIG_SYS_PSSR_VAL 0x37
-
-/*
- * Memory settings
- *
- * This is the configuration for nCS0/1 -> flash banks
- * configuration for nCS1:
- * [31] 0 - Slower Device
- * [30:28] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [27:24] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns
- * [23:20] 1011 - " for first access: (11+2)*MemClk = 130 ns
- * [19] 1 - 16 Bit bus width
- * [18:16] 000 - nonburst RAM or FLASH
- * configuration for nCS0:
- * [15] 0 - Slower Device
- * [14:12] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [11:08] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns
- * [07:04] 1011 - " for first access: (11+2)*MemClk = 130 ns
- * [03] 1 - 16 Bit bus width
- * [02:00] 000 - nonburst RAM or FLASH
- */
-#define CONFIG_SYS_MSC0_VAL 0x25b825b8 /* flash banks */
-
-/* This is the configuration for nCS2/3 -> TDM-Switch, DSP
- * configuration for nCS3: DSP
- * [31] 0 - Slower Device
- * [30:28] 001 - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns
- * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [23:20] 0011 - RDF3: Address for first access: (3+1)*MemClk = 40 ns
- * [19] 1 - 16 Bit bus width
- * [18:16] 100 - variable latency I/O
- * configuration for nCS2: TDM-Switch
- * [15] 0 - Slower Device
- * [14:12] 101 - RRR2: CS deselect to CS time: 5*(2*MemClk) = 100 ns
- * [11:08] 1001 - RDN2: Address to data valid in bursts: (9+1)*MemClk = 100 ns
- * [07:04] 0011 - RDF2: Address for first access: (3+1)*MemClk = 40 ns
- * [03] 1 - 16 Bit bus width
- * [02:00] 100 - variable latency I/O
- */
-#define CONFIG_SYS_MSC1_VAL 0x123C593C /* TDM switch, DSP */
-
-/* This is the configuration for nCS4/5 -> ExtBus, LAN Controller
- *
- * configuration for nCS5: LAN Controller
- * [31] 0 - Slower Device
- * [30:28] 001 - RRR5: CS deselect to CS time: 1*(2*MemClk) = 20 ns
- * [27:24] 0010 - RDN5: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [23:20] 0011 - RDF5: Address for first access: (3+1)*MemClk = 40 ns
- * [19] 1 - 16 Bit bus width
- * [18:16] 100 - variable latency I/O
- * configuration for nCS4: ExtBus
- * [15] 0 - Slower Device
- * [14:12] 110 - RRR4: CS deselect to CS time: 6*(2*MemClk) = 120 ns
- * [11:08] 1100 - RDN4: Address to data valid in bursts: (12+1)*MemClk = 130 ns
- * [07:04] 1101 - RDF4: Address for first access: 13->(15+1)*MemClk = 160 ns
- * [03] 1 - 16 Bit bus width
- * [02:00] 100 - variable latency I/O
- */
-#define CONFIG_SYS_MSC2_VAL 0x123C6CDC /* extra bus, LAN controller */
-
-/* MDCNFG: SDRAM Configuration Register
- *
- * [31:29] 000 - reserved
- * [28] 0 - no SA1111 compatiblity mode
- * [27] 0 - latch return data with return clock
- * [26] 0 - alternate addressing for pair 2/3
- * [25:24] 00 - timings
- * [23] 0 - internal banks in lower partition 2/3 (not used)
- * [22:21] 00 - row address bits for partition 2/3 (not used)
- * [20:19] 00 - column address bits for partition 2/3 (not used)
- * [18] 0 - SDRAM partition 2/3 width is 32 bit
- * [17] 0 - SDRAM partition 3 disabled
- * [16] 0 - SDRAM partition 2 disabled
- * [15:13] 000 - reserved
- * [12] 1 - SA1111 compatiblity mode
- * [11] 1 - latch return data with return clock
- * [10] 0 - no alternate addressing for pair 0/1
- * [09:08] 01 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk
- * [7] 1 - 4 internal banks in lower partition pair
- * [06:05] 10 - 13 row address bits for partition 0/1
- * [04:03] 01 - 9 column address bits for partition 0/1
- * [02] 0 - SDRAM partition 0/1 width is 32 bit
- * [01] 0 - disable SDRAM partition 1
- * [00] 1 - enable SDRAM partition 0
- */
-/* use the configuration above but disable partition 0 */
-#define CONFIG_SYS_MDCNFG_VAL 0x000019c8
-
-/* MDREFR: SDRAM Refresh Control Register
- *
- * [32:26] 0 - reserved
- * [25] 0 - K2FREE: not free running
- * [24] 0 - K1FREE: not free running
- * [23] 1 - K0FREE: not free running
- * [22] 0 - SLFRSH: self refresh disabled
- * [21] 0 - reserved
- * [20] 0 - APD: no auto power down
- * [19] 0 - K2DB2: SDCLK2 is MemClk
- * [18] 0 - K2RUN: disable SDCLK2
- * [17] 0 - K1DB2: SDCLK1 is MemClk
- * [16] 1 - K1RUN: enable SDCLK1
- * [15] 1 - E1PIN: SDRAM clock enable
- * [14] 1 - K0DB2: SDCLK0 is MemClk
- * [13] 0 - K0RUN: disable SDCLK0
- * [12] 1 - E0PIN: disable SDCKE0
- * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24
- */
-#define CONFIG_SYS_MDREFR_VAL 0x0081D018
-
-/* MDMRS: Mode Register Set Configuration Register
- *
- * [31] 0 - reserved
- * [30:23] 00000000- MDMRS2: SDRAM2/3 MRS Value. (not used)
- * [22:20] 000 - MDCL2: SDRAM2/3 Cas Latency. (not used)
- * [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used)
- * [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used)
- * [15] 0 - reserved
- * [14:07] 00000000- MDMRS0: SDRAM0/1 MRS Value.
- * [06:04] 010 - MDCL0: SDRAM0/1 Cas Latency.
- * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential.
- * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4.
- */
-#define CONFIG_SYS_MDMRS_VAL 0x00020022
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL 0x00000000
-#define CONFIG_SYS_MCMEM0_VAL 0x00000000
-#define CONFIG_SYS_MCMEM1_VAL 0x00000000
-#define CONFIG_SYS_MCATT0_VAL 0x00000000
-#define CONFIG_SYS_MCATT1_VAL 0x00000000
-#define CONFIG_SYS_MCIO0_VAL 0x00000000
-#define CONFIG_SYS_MCIO1_VAL 0x00000000
-#endif
-
-/*
- * GPIO settings
- */
-#define CONFIG_SYS_GPSR0_VAL 0xFFFFFFFF
-#define CONFIG_SYS_GPSR1_VAL 0xFFFFFFFF
-#define CONFIG_SYS_GPSR2_VAL 0xFFFFFFFF
-#define CONFIG_SYS_GPCR0_VAL 0x08022080
-#define CONFIG_SYS_GPCR1_VAL 0x00000000
-#define CONFIG_SYS_GPCR2_VAL 0x00000000
-#define CONFIG_SYS_GPDR0_VAL 0xCD82A878
-#define CONFIG_SYS_GPDR1_VAL 0xFCFFAB80
-#define CONFIG_SYS_GPDR2_VAL 0x0001FFFF
-#define CONFIG_SYS_GAFR0_L_VAL 0x80000000
-#define CONFIG_SYS_GAFR0_U_VAL 0xA5254010
-#define CONFIG_SYS_GAFR1_L_VAL 0x599A9550
-#define CONFIG_SYS_GAFR1_U_VAL 0xAAA5AAAA
-#define CONFIG_SYS_GAFR2_L_VAL 0xAAAAAAAA
-#define CONFIG_SYS_GAFR2_U_VAL 0x00000002
-
-/* FIXME: set GPIO_RER/FER */
-
-#define CONFIG_SYS_PSSR_VAL 0x20
-
-#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10
-#define CONFIG_SYS_CKEN 0x0
-
-/*
- * Memory settings
- */
-
-#define CONFIG_SYS_MSC0_VAL 0x2ef15af0
-#define CONFIG_SYS_MSC1_VAL 0x00003ff4
-#define CONFIG_SYS_MSC2_VAL 0x7ff07ff0
-#define CONFIG_SYS_MDCNFG_VAL 0x09a909a9
-#define CONFIG_SYS_MDREFR_VAL 0x038ff030
-#define CONFIG_SYS_MDMRS_VAL 0x00220022
-#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
-#define CONFIG_SYS_SXCNFG_VAL 0x00000000
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL 0x00000000
-#define CONFIG_SYS_MCMEM0_VAL 0x00000000
-#define CONFIG_SYS_MCMEM1_VAL 0x00000000
-#define CONFIG_SYS_MCATT0_VAL 0x00000000
-#define CONFIG_SYS_MCATT1_VAL 0x00000000
-#define CONFIG_SYS_MCIO0_VAL 0x00000000
-#define CONFIG_SYS_MCIO1_VAL 0x00000000
-
-#define CSB226_USER_LED0 0x00000008
-#define CSB226_USER_LED1 0x00000010
-#define CSB226_USER_LED2 0x00000020
-
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sect. on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000)
- /* Addr of Environment Sector */
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
-#endif /* __CONFIG_H */
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-10-31 19:59:25 +0000