diff options
Diffstat (limited to 'include/configs/TQM5200.h')
| -rw-r--r-- | include/configs/TQM5200.h | 173 |
1 files changed, 112 insertions, 61 deletions
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 6c8712b68..2c34ce09b 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -37,7 +37,8 @@ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ #undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ -#ifndef CONFIG_CAM5200 /* On a Cameron board or ... */ +/* On a Cameron or on a FO300 board or ... */ +#if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300) #define CONFIG_STK52XX 1 /* ... on a STK52XX board */ #endif @@ -58,6 +59,20 @@ #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#ifdef CONFIG_FO300 +#define CFG_DEVICE_NULLDEV 1 /* enable null device */ +#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* used to detect S1 switch position */ +#define CONFIG_USB_BIN_FIXUP 1 /* for a buggy USB device */ +#if 0 +#define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED 1 /* silent console on PSC1 when S1 */ + /* switch is closed */ +#endif + +#undef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED /* silent console on PSC1 when S1 */ + /* switch is open */ +#endif /* CONFIG_FO300 */ + #ifdef CONFIG_STK52XX #define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ #define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ @@ -105,12 +120,18 @@ #define CONFIG_VIDEO_SM501_32BPP #define CONFIG_CFB_CONSOLE #define CONFIG_VIDEO_LOGO -#define CONFIG_VGA_AS_SINGLE_DEVICE + +#ifndef CONFIG_FO300 #define CONFIG_CONSOLE_EXTRA_INFO +#else +#define CONFIG_VIDEO_BMP_LOGO +#endif + +#define CONFIG_VGA_AS_SINGLE_DEVICE #define CONFIG_VIDEO_SW_CURSOR #define CONFIG_SPLASH_SCREEN #define CFG_CONSOLE_IS_IN_ENV -#endif +#endif /* #ifndef CONFIG_TQM5200S */ #ifdef CONFIG_VIDEO #define ADD_BMP_CMD CFG_CMD_BMP @@ -124,7 +145,7 @@ #define CONFIG_ISO_PARTITION /* USB */ -#ifdef CONFIG_STK52XX +#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) #define CONFIG_USB_OHCI_NEW #define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE @@ -155,7 +176,7 @@ #endif /* IDE */ -#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) +#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) || defined(CONFIG_FO300) #define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2) #else #define ADD_IDE_CMD 0 @@ -203,37 +224,19 @@ #undef CONFIG_BOOTARGS -#ifdef CONFIG_STK52XX -# if defined(CONFIG_TQM5200_B) -# if defined(CFG_LOWBOOT) -# define ENV_UPDT \ - "update=protect off FC000000 FC07FFFF;" \ - "erase FC000000 FC07FFFF;" \ - "cp.b 200000 FC000000 ${filesize};" \ - "protect on FC000000 FC07FFFF\0" -# else /* highboot */ -# define ENV_UPDT \ - "update=protect off FFF00000 FFF7FFFF;" \ - "erase FFF00000 FFF7FFFF;" \ +#if defined(CONFIG_TQM5200_B) && !defined(CFG_LOWBOOT) +# define ENV_UPDT \ + "update=protect off FFF00000 +${filesize};" \ + "erase FFF00000 +${filesize};" \ "cp.b 200000 FFF00000 ${filesize};" \ - "protect on FFF00000 FFF7FFFF\0" -# endif /* CFG_LOWBOOT */ -# else /* !CONFIG_TQM5200_B */ -# define ENV_UPDT \ - "update=protect off FC000000 FC05FFFF;" \ - "erase FC000000 FC05FFFF;" \ - "cp.b 200000 FC000000 ${filesize};" \ - "protect on FC000000 FC05FFFF\0" -# endif /* CONFIG_TQM5200_B */ -#elif defined (CONFIG_CAM5200) + "protect on FFF00000 +${filesize}\0" +#else /* default lowboot configuration */ # define ENV_UPDT \ - "update=protect off FC000000 FC03FFFF;" \ - "erase FC000000 FC03FFFF;" \ + "update=protect off FC000000 +${filesize};" \ + "erase FC000000 +${filesize};" \ "cp.b 200000 FC000000 ${filesize};" \ - "protect on FC000000 FC03FFFF\0" -#else -# error "Unknown Carrier Board" -#endif /* CONFIG_STK52XX */ + "protect on FC000000 +${filesize}\0" +#endif #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ @@ -265,7 +268,7 @@ */ #define CFG_IPBSPEED_133 /* define for 133MHz speed */ -#if defined(CFG_IPBSPEED_133) +#if defined(CFG_IPBSPEED_133) && !defined(CONFIG_CAM5200) /* * PCI Bus clocking configuration * @@ -329,13 +332,29 @@ */ #define CFG_FLASH_BASE 0xFC000000 +#ifndef CONFIG_CAM5200 /* use CFI flash driver */ #define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ #define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ #define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks + (= chip selects) */ +#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#else /* CONFIG_CAM5200 */ +#define CFG_MAX_FLASH_BANKS 2 /* max num of flash banks + (= chip selects) */ +#define CFG_FLASH_WORD_SIZE unsigned int /* main flash device with */ +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_ADDR0 0x555 +#define CFG_FLASH_ADDR1 0x2AA +#define CFG_FLASH_2ND_16BIT_DEV 1 /* NIOS flash is a 16bit device */ +#define CFG_MAX_FLASH_SECT 128 +#endif /* ifndef CONFIG_CAM5200 */ + #define CFG_FLASH_EMPTY_INFO #define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */ -#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ #define CFG_FLASH_USE_BUFFER_WRITE 1 #if defined (CONFIG_CAM5200) @@ -346,9 +365,6 @@ # define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000) #endif -#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks - (= chip selects) */ - /* Dynamic MTD partition support */ #define CONFIG_JFFS2_CMDLINE #define MTDIDS_DEFAULT "nor0=TQM5200-0" @@ -381,8 +397,13 @@ #elif defined (CONFIG_CAM5200) # define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:768k(firmware)," \ "1792k(kernel)," \ - "3584k(small-fs)," \ + "5632k(rootfs)," \ + "24m(home)" +#elif defined (CONFIG_FO300) +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ + "1408k(kernel)," \ "2m(initrd)," \ + "4m(small-fs)," \ "8m(misc)," \ "16m(big-fs)" #else @@ -394,7 +415,7 @@ */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SIZE 0x4000 /* 16 k - keep small for fast booting */ -#if defined(CONFIG_TQM5200_B) +#if defined(CONFIG_TQM5200_B) || defined (CONFIG_CAM5200) #define CFG_ENV_SECT_SIZE 0x40000 #else #define CFG_ENV_SECT_SIZE 0x20000 @@ -452,28 +473,43 @@ /* * GPIO configuration * - * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1): - * Bit 0 (mask: 0x80000000): 1 + * use CS1: Bit 0 (mask: 0x80000000): + * 1 -> Pin gpio_wkup_6 as second SDRAM chip select (mem_cs1). * use ALT CAN position: Bits 2-3 (mask: 0x30000000): - * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. - * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. - * Use for REV200 STK52XX boards. Do not use with REV100 modules - * (because, there I2C1 is used as I2C bus) - * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 - * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030) - * 000 -> All PSC2 pins are GIOPs - * 001 -> CAN1/2 on PSC2 pins - * Use for REV100 STK52xx boards - * use PSC6: - * on STK52xx: - * use as UART. Pins PSC6_0 to PSC6_3 are used. - * Bits 9:11 (mask: 0x00700000): - * 101 -> PSC6 : Extended POST test is not available - * on MINI-FAP and TQM5200_IB: - * use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000): - * 000 -> PSC6 could not be used as UART, CODEC or IrDA - * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST - * tests. + * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. + * SPI on PSC3 according to PSC3 setting. Use for CAM5200. + * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. + * Use for REV200 STK52XX boards and FO300 boards. Do not use + * with REV100 modules (because, there I2C1 is used as I2C bus). + * use ATA: Bits 6-7 (mask 0x03000000): + * 00 -> No ATA chip selects, csb_4/5 used as normal chip selects. + * Use for CAM5200 board. + * 01 -> ATA cs0/1 on csb_4/5. Use for the remaining boards. + * use PSC6: Bits 9-11 (mask 0x00700000): + * 000 -> use PSC6_0 to PSC6_3 as GPIO, PSC6 could not be used as + * UART, CODEC or IrDA. + * GPIO on PSC6_3 is used in post_hotkeys_pressed() to + * enable extended POST tests. + * Use for MINI-FAP and TQM5200_IB boards. + * 101 -> use PSC6 as UART. Pins PSC6_0 to PSC6_3 are used. + * Extended POST test is not available. + * Use for STK52xx, FO300 and CAM5200 boards. + * use PCI_DIS: Bit 16 (mask 0x00008000): + * 1 -> disable PCI controller (on CAM5200 board). + * use USB: Bits 18-19 (mask 0x00003000): + * 10 -> two UARTs (on FO300 and CAM5200). + * use PSC3: Bits 20-23 (mask: 0x00000f00): + * 0000 -> All PSC3 pins are GPIOs. + * 1100 -> UART/SPI (on FO300 board). + * 0100 -> UART (on CAM5200 board). + * use PSC2: Bits 25:27 (mask: 0x00000030): + * 000 -> All PSC2 pins are GPIOs. + * 100 -> UART (on CAM5200 board). + * 001 -> CAN1/2 on PSC2 pins. + * Use for REV100 STK52xx boards + * 01x -> Use AC97 (on FO300 board). + * use PSC1: Bits 29-31 (mask: 0x00000007): + * 100 -> UART (on all boards). */ #if defined (CONFIG_MINIFAP) # define CFG_GPS_PORT_CONFIG 0x91000004 @@ -487,6 +523,10 @@ # define CFG_GPS_PORT_CONFIG 0x91500004 # endif # endif +#elif defined (CONFIG_FO300) +# define CFG_GPS_PORT_CONFIG 0x91502c24 +#elif defined (CONFIG_CAM5200) +# define CFG_GPS_PORT_CONFIG 0x8050A444 #else /* TMQ5200 Inbetriebnahme-Board */ # define CFG_GPS_PORT_CONFIG 0x81000004 #endif @@ -509,6 +549,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CFG_HUSH_PARSER 1 /* use "hush" command parser */ #define CFG_PROMPT_HUSH_PS2 "> " @@ -581,6 +622,16 @@ #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ +#if defined(CONFIG_CAM5200) +#define CFG_CS4_START 0xB0000000 +#define CFG_CS4_SIZE 0x00010000 +#define CFG_CS4_CFG 0x01019C10 + +#define CFG_CS5_START 0xD0000000 +#define CFG_CS5_SIZE 0x01208000 +#define CFG_CS5_CFG 0x1414BF10 +#endif + #define CFG_RESET_ADDRESS 0xff000000 /*----------------------------------------------------------------------- |