diff options
Diffstat (limited to 'include/cmd_bsp.h')
| -rw-r--r-- | include/cmd_bsp.h | 313 |
1 files changed, 313 insertions, 0 deletions
diff --git a/include/cmd_bsp.h b/include/cmd_bsp.h new file mode 100644 index 000000000..b39d50bd2 --- /dev/null +++ b/include/cmd_bsp.h @@ -0,0 +1,313 @@ +/* + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _CMD_BSP_H_ +#define _CMD_BSP_H_ + +#include <common.h> +#include <command.h> + +#if (CONFIG_COMMANDS & CFG_CMD_BSP) + +/* ----- LWMON ----------------------------------------------------------------- + */ +#if defined(CONFIG_LWMON) + +#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ + "pic", 3, 4, 1, do_pic, \ + "pic - read and write PIC registers\n", \ + "read reg - read PIC register `reg'\n" \ + "pic write reg val - write value `val' to PIC register `reg'\n" \ +), MK_CMD_TBL_ENTRY( \ + "kbd", 3, 1, 1, do_kbd, \ + "kbd - read keyboard status\n", \ + NULL \ +), MK_CMD_TBL_ENTRY( \ + "lsb", 3, 2, 1, do_lsb, \ + "lsb - check and set LSB switch\n", \ + "on - switch LSB on\n" \ + "lsb off - switch LSB off\n" \ + "lsb - print current setting\n" \ +), +int do_pic (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +#endif /* CONFIG_LWMON */ +/* ----------------------------------------------------------------------------*/ + +/* ----- PCU E ----------------------------------------------------------------- + */ +#if defined(CONFIG_PCU_E) + +#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ + "puma", 4, 4, 1, do_puma, \ + "puma - access PUMA FPGA\n", \ + "status - print PUMA status\n" \ + "puma load addr len - load PUMA configuration data\n" \ +), +int do_puma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +#endif /* CONFIG_PCU_E */ +/* ----------------------------------------------------------------------------*/ + +/* ----- CCM/SCM --------------------------------------------------------------- + */ +#if defined(CONFIG_CCM) || defined(CONFIG_SCM) + +#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ + "fpga", 4, 4, 1, do_fpga, \ + "fpga - access FPGA(s)\n", \ + "fpga status [name] - print FPGA status\n" \ + "fpga reset [name] - reset FPGA\n" \ + "fpga load [name] addr - load FPGA configuration data\n" \ +), +int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +#endif /* CONFIG_CCM, CONFIG_SCM */ +/* ----------------------------------------------------------------------------*/ + +/* ----- PIP405 ----------------------------------------------------------------- + */ +#if defined(CONFIG_PIP405) + +#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ + "pip405", 4, 6, 1, do_pip405, \ + "pip405 - PIP405 specific Cmds\n", \ + "flash mem [SrcAddr] - updates U-Boot with image in memory\n" \ + "pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n" \ + "pip405 flash mps - updates U-Boot with image from MPS\n" \ +), +int do_pip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +#endif /* CONFIG_PIP405 */ +/* ----------------------------------------------------------------------------*/ +/* ----- MIP405 ----------------------------------------------------------------- + */ +#if defined(CONFIG_MIP405) + +#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ + "mip405", 4, 6, 1, do_mip405, \ + "mip405 - MIP405 specific Cmds\n", \ + "flash mem [SrcAddr] - updates U-Boot with image in memory\n" \ + "mip405 flash mps - updates U-Boot with image from MPS\n" \ +), +int do_mip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +#endif /* CONFIG_MIP405 */ +/* ----------------------------------------------------------------------------*/ + +/* ----- DASA_SIM --------------------------------------------------------------- + */ +#if defined(CONFIG_DASA_SIM) + +#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ + "pci9054", 7, 3, 1, do_pci9054, \ + "pci9054 - PLX PCI9054 EEPROM access\n", \ + "pci9054 info - print EEPROM values\n" \ + "pci9054 update - updates EEPROM with default values\n" \ +), +int do_pci9054 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +#endif /* CONFIG_DASA_SIM */ +/* ----------------------------------------------------------------------------*/ + +/* ----- HYMOD ----------------------------------------------------------------- + */ +#if defined(CONFIG_HYMOD) + +#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ + "fpga", 4, 6, 1, do_fpga, \ + "fpga - FPGA sub-system\n", \ + "load [type] addr size\n" \ + " - write the configuration data at memory address `addr',\n" \ + " size `size' bytes, into the FPGA of type `type' (either\n" \ + " `main' or `mezz', default `main'). e.g.\n" \ + " `fpga load 100000 7d8f'\n" \ + " loads the main FPGA with config data at address 100000\n" \ + " HEX, size 7d8f HEX (32143 DEC) bytes\n" \ + "fpga tftp file addr\n" \ + " - transfers `file' from the tftp server into memory at\n" \ + " address `addr', then writes the entire file contents\n" \ + " into the main FPGA\n" \ + "fpga store addr\n" \ + " - read configuration data from the main FPGA (the mezz\n" \ + " FPGA is write-only), into address `addr'. There must be\n" \ + " enough memory available at `addr' to hold all the config\n"\ + " data - the size of which is determined by VC:???\n" \ + "fpga info\n" \ + " - print information about the Hymod FPGA, namely the\n" \ + " memory addresses at which the four FPGA local bus\n" \ + " address spaces appear in the physical address space\n" \ +), MK_CMD_TBL_ENTRY( \ + "eeclear", 4, 1, 0, do_eecl, \ + "eeclear - Clear the eeprom on a Hymod board \n", \ + "[type]\n" \ + " - write zeroes into the EEPROM on the board of type `type'\n"\ + " (`type' is either `main' or `mezz' - default `main')\n" \ + " Note: the EEPROM write enable jumper must be installed\n" \ +), +int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +int do_eecl (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +#endif /* CONFIG_HYMOD */ +/* ----------------------------------------------------------------------------*/ +/* CRAY405 (L1) */ +#if defined (CONFIG_CRAYL1) +#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ + "L1cmd", 5, 4, 1, do_crayL1, \ + "L1cmd - L1 update, setup, commands \n", \ + "L1cmd update - update flash images from host\n" \ + "L1cmd boot - nfs or ramboot L1\n" \ +), +int do_crayL1 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +#endif /* CONFIG_CRAY405 */ +/* ----------------------------------------------------------------------------*/ + +#if defined (CONFIG_EVB64260) +/* ----- EVB64260 -------------------------------------------------------------*/ +#ifdef CONFIG_ZUMA_V2 +#define CMD_TBL_BSP ZUMA_TBL_ENTRY + +#define ZUMA_TBL_ENTRY MK_CMD_TBL_ENTRY( \ + "zinit", 5, 1, 0, do_zuma_init_pbb, \ + "zinit - init zuma pbb\n", \ + "\n" \ + " - init zuma pbb\n" \ +), MK_CMD_TBL_ENTRY( \ + "zdtest", 6, 3, 1, do_zuma_test_dma, \ + "zdtest - run dma test\n", \ + "[cmd [count]]\n" \ + " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n" \ +), MK_CMD_TBL_ENTRY( \ + "zminit", 5, 1, 0, do_zuma_init_mbox, \ + "zminit - init zuma mbox\n", \ + "\n" \ + " - init zuma mbox\n" \ +), + +int do_zuma_init_pbb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +int do_zuma_test_dma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +int do_zuma_init_mbox (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +void zuma_init_pbb(void); +int zuma_mbox_init(void); +int zuma_test_dma(int cmd, int size); +#else +#define CMD_TBL_BSP +#endif /* ZUMA_NTL */ + +#endif /* CONFIG_EVB64260 */ +/* ----------------------------------------------------------------------------*/ + +/* -----W7O--------------------------------------------------------------------*/ +#if defined(CONFIG_W7O) + +#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ + "vpd", 3, 2, 1, do_vpd, \ + "vpd - Read Vital Product Data\n", \ + "[dev_addr]\n" \ + " - Read VPD Data from default address, or device address 'dev_addr'.\n" \ +), + +extern int do_vpd (cmd_tbl_t *, int, int, char *[]); + +#endif /* CONFIG_W7O */ +/* ----------------------------------------------------------------------------*/ + +/* ---- PCIPPC2 / PCIPPC6 -----------------------------------------------------*/ +#if defined(CONFIG_PCIPPC2) || defined(CONFIG_PCIPPC6) +#if defined(CONFIG_WATCHDOG) + +#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ + "wd", 3, 2, 1, do_wd, \ + "wd - check and set watchdog\n", \ + "on - switch watchDog on\n" \ + "wd off - switch watchdog off\n" \ + "wd - print current status\n" \ +), + +extern int do_wd (cmd_tbl_t *, int, int, char *[]); + +#else +#define CMD_TBL_BSP +#endif /* CONFIG_WATCHDOG */ + +#endif /* CONFIG_PCIPPC2 , CONFIG_PCIPPC6 */ +/* ----------------------------------------------------------------------------*/ + +/* ----- PN62 -----------------------------------------------------------------*/ +#if defined(CONFIG_PN62) + +#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ + "loadpci", 5, 2, 1, do_loadpci, \ + "loadpci - load binary file over PCI\n", \ + "[addr]\n" \ + " - load binary file over PCI to address 'addr'\n" \ +), MK_CMD_TBL_ENTRY( \ + "led" , 3, 3, 1, do_led, \ + "led - set LED 0..11 on the PN62 board\n", \ + "i fun\n" \ + " - set 'i'th LED to function 'fun'\n" \ +), + +extern int do_loadpci (cmd_tbl_t *, int, int, char *[]); +extern int do_led (cmd_tbl_t *, int, int, char *[]); +#endif /* CONFIG_PN62 */ +/* ----------------------------------------------------------------------------*/ + +/* ----- TRAB ------------------------------------------------------------------ + */ +#if defined(CONFIG_TRAB) + +#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ + "kbd", 3, 1, 1, do_kbd, \ + "kbd - read keyboard status\n", \ + NULL \ +), + +int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +#endif /* CONFIG_TRAB */ +/* ----------------------------------------------------------------------------*/ + +#else +#define CMD_TBL_BSP +#endif /* CFG_CMD_BSP */ + +/* ----- R360MPI --------------------------------------------------------------- + */ +#if defined(CONFIG_R360MPI) + +#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ + "kbd", 3, 1, 1, do_kbd, \ + "kbd - read keyboard status\n", \ + NULL \ +), + +int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +#endif /* CONFIG_R360MPI */ +/* ----------------------------------------------------------------------------*/ + +#endif /* _CMD_BSP_H_ */ |