diff options
Diffstat (limited to 'include/asm-m68k/mcfuart.h')
| -rw-r--r-- | include/asm-m68k/mcfuart.h | 324 |
1 files changed, 232 insertions, 92 deletions
diff --git a/include/asm-m68k/mcfuart.h b/include/asm-m68k/mcfuart.h index 7c0999d61..43b49a87c 100644 --- a/include/asm-m68k/mcfuart.h +++ b/include/asm-m68k/mcfuart.h @@ -36,106 +36,105 @@ * space. */ #if defined(CONFIG_M5272) -#define MCFUART_BASE1 0x100 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ +#define MCFUART_BASE1 0x100 /* Base address of UART1 */ +#define MCFUART_BASE2 0x140 /* Base address of UART2 */ #elif defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e) #if defined(CONFIG_NETtel) -#define MCFUART_BASE1 0x180 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ +#define MCFUART_BASE1 0x180 /* Base address of UART1 */ +#define MCFUART_BASE2 0x140 /* Base address of UART2 */ #else -#define MCFUART_BASE1 0x140 /* Base address of UART1 */ -#define MCFUART_BASE2 0x180 /* Base address of UART2 */ +#define MCFUART_BASE1 0x140 /* Base address of UART1 */ +#define MCFUART_BASE2 0x180 /* Base address of UART2 */ #endif #elif defined(CONFIG_M5282) || defined(CONFIG_M5271) -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x240 /* Base address of UART2 */ -#define MCFUART_BASE3 0x280 /* Base address of UART3 */ +#define MCFUART_BASE1 0x200 /* Base address of UART1 */ +#define MCFUART_BASE2 0x240 /* Base address of UART2 */ +#define MCFUART_BASE3 0x280 /* Base address of UART3 */ #elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) #if defined(CONFIG_NETtel) || defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3) -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ +#define MCFUART_BASE1 0x200 /* Base address of UART1 */ +#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ #else -#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ -#define MCFUART_BASE2 0x200 /* Base address of UART2 */ +#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ +#define MCFUART_BASE2 0x200 /* Base address of UART2 */ #endif #endif - /* * Define the ColdFire UART register set addresses. */ -#define MCFUART_UMR 0x00 /* Mode register (r/w) */ -#define MCFUART_USR 0x04 /* Status register (r) */ -#define MCFUART_UCSR 0x04 /* Clock Select (w) */ -#define MCFUART_UCR 0x08 /* Command register (w) */ -#define MCFUART_URB 0x0c /* Receiver Buffer (r) */ -#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */ -#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */ -#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */ -#define MCFUART_UISR 0x14 /* Interrup Status (r) */ -#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */ -#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */ -#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */ +#define MCFUART_UMR 0x00 /* Mode register (r/w) */ +#define MCFUART_USR 0x04 /* Status register (r) */ +#define MCFUART_UCSR 0x04 /* Clock Select (w) */ +#define MCFUART_UCR 0x08 /* Command register (w) */ +#define MCFUART_URB 0x0c /* Receiver Buffer (r) */ +#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */ +#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */ +#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */ +#define MCFUART_UISR 0x14 /* Interrup Status (r) */ +#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */ +#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */ +#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */ #ifdef CONFIG_M5272 -#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ -#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ -#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ +#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ +#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ +#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ #else -#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ +#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ #endif -#define MCFUART_UIPR 0x34 /* Input Port (r) */ -#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */ -#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */ +#define MCFUART_UIPR 0x34 /* Input Port (r) */ +#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */ +#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */ #ifdef CONFIG_M5249 /* Note: This isn't in the 5249 docs */ -#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ +#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ #endif /* * Define bit flags in Mode Register 1 (MR1). */ -#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */ -#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */ -#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */ -#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */ -#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */ +#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */ +#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */ +#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */ +#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */ +#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */ -#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */ -#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */ -#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */ -#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */ -#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */ +#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */ +#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */ +#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */ +#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */ +#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */ -#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */ -#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */ -#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */ -#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */ +#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */ +#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */ +#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */ +#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */ /* * Define bit flags in Mode Register 2 (MR2). */ -#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */ -#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */ -#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */ -#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */ -#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */ +#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */ +#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */ +#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */ +#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */ +#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */ -#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */ -#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */ -#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */ +#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */ +#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */ +#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */ /* * Define bit flags in Status Register (USR). */ -#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */ -#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */ -#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */ -#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */ -#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */ -#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */ -#define MCFUART_USR_RXFULL 0x02 /* Receiver full */ -#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */ +#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */ +#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */ +#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */ +#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */ +#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */ +#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */ +#define MCFUART_USR_RXFULL 0x02 /* Receiver full */ +#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */ #define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \ MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN) @@ -143,13 +142,13 @@ /* * Define bit flags in Clock Select Register (UCSR). */ -#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */ -#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */ -#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */ +#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */ +#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */ +#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */ -#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */ -#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */ -#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */ +#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */ +#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */ +#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */ /* * Define bit flags in Command Register (UCR). @@ -163,59 +162,200 @@ #define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */ #define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */ -#define MCFUART_UCR_TXNULL 0x00 /* No TX command */ -#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */ -#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */ -#define MCFUART_UCR_RXNULL 0x00 /* No RX command */ -#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */ -#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */ +#define MCFUART_UCR_TXNULL 0x00 /* No TX command */ +#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */ +#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */ +#define MCFUART_UCR_RXNULL 0x00 /* No RX command */ +#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */ +#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */ /* * Define bit flags in Input Port Change Register (UIPCR). */ -#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */ -#define MCFUART_UIPCR_CTS 0x01 /* CTS value */ +#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */ +#define MCFUART_UIPCR_CTS 0x01 /* CTS value */ /* * Define bit flags in Input Port Register (UIP). */ -#define MCFUART_UIPR_CTS 0x01 /* CTS value */ +#define MCFUART_UIPR_CTS 0x01 /* CTS value */ /* * Define bit flags in Output Port Registers (UOP). * Clear bit by writing to UOP0, set by writing to UOP1. */ -#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */ +#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */ /* * Define bit flags in the Auxiliary Control Register (UACR). */ -#define MCFUART_UACR_IEC 0x01 /* Input enable control */ +#define MCFUART_UACR_IEC 0x01 /* Input enable control */ /* * Define bit flags in Interrupt Status Register (UISR). * These same bits are used for the Interrupt Mask Register (UIMR). */ -#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */ -#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */ -#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */ -#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */ +#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */ +#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */ +#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */ +#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */ #ifdef CONFIG_M5272 /* * Define bit flags in the Transmitter FIFO Register (UTF). */ -#define MCFUART_UTF_TXB 0x1f /* transmitter data level */ -#define MCFUART_UTF_FULL 0x20 /* transmitter fifo full */ -#define MCFUART_UTF_TXS 0xc0 /* transmitter status */ +#define MCFUART_UTF_TXB 0x1f /* transmitter data level */ +#define MCFUART_UTF_FULL 0x20 /* transmitter fifo full */ +#define MCFUART_UTF_TXS 0xc0 /* transmitter status */ /* * Define bit flags in the Receiver FIFO Register (URF). */ -#define MCFUART_URF_RXB 0x1f /* receiver data level */ -#define MCFUART_URF_FULL 0x20 /* receiver fifo full */ -#define MCFUART_URF_RXS 0xc0 /* receiver status */ +#define MCFUART_URF_RXB 0x1f /* receiver data level */ +#define MCFUART_URF_FULL 0x20 /* receiver fifo full */ +#define MCFUART_URF_RXS 0xc0 /* receiver status */ #endif +#ifdef CONFIG_MCFUART +/* UART module registers */ +/* Register read/write struct */ +typedef struct uart { + u8 umr; /* 0x00 Mode Register */ + u8 resv0[0x3]; + union { + u8 usr; /* 0x04 Status Register */ + u8 ucsr; /* 0x04 Clock Select Register */ + }; + u8 resv1[0x3]; + u8 ucr; /* 0x08 Command Register */ + u8 resv2[0x3]; + union { + u8 utb; /* 0x0c Transmit Buffer */ + u8 urb; /* 0x0c Receive Buffer */ + }; + u8 resv3[0x3]; + union { + u8 uipcr; /* 0x10 Input Port Change Register */ + u8 uacr; /* 0x10 Auxiliary Control reg */ + }; + u8 resv4[0x3]; + union { + u8 uimr; /* 0x14 Interrupt Mask reg */ + u8 uisr; /* 0x14 Interrupt Status reg */ + }; + u8 resv5[0x3]; + u8 ubg1; /* 0x18 Counter Timer Upper Register */ + u8 resv6[0x3]; + u8 ubg2; /* 0x1c Counter Timer Lower Register */ + u8 resv7[0x17]; + u8 uip; /* 0x34 Input Port Register */ + u8 resv8[0x3]; + u8 uop1; /* 0x38 Output Port Set Register */ + u8 resv9[0x3]; + u8 uop0; /* 0x3c Output Port Reset Register */ +} uart_t; + +/********************************************************************* +* Universal Asynchronous Receiver Transmitter (UART) +*********************************************************************/ +/* Bit definitions and macros for UMR */ +#define UART_UMR_BC(x) (((x)&0x03)) +#define UART_UMR_PT (0x04) +#define UART_UMR_PM(x) (((x)&0x03)<<3) +#define UART_UMR_ERR (0x20) +#define UART_UMR_RXIRQ (0x40) +#define UART_UMR_RXRTS (0x80) +#define UART_UMR_SB(x) (((x)&0x0F)) +#define UART_UMR_TXCTS (0x10) /* Trsnsmit CTS */ +#define UART_UMR_TXRTS (0x20) /* Transmit RTS */ +#define UART_UMR_CM(x) (((x)&0x03)<<6) /* CM bits */ +#define UART_UMR_PM_MULTI_ADDR (0x1C) +#define UART_UMR_PM_MULTI_DATA (0x18) +#define UART_UMR_PM_NONE (0x10) +#define UART_UMR_PM_FORCE_HI (0x0C) +#define UART_UMR_PM_FORCE_LO (0x08) +#define UART_UMR_PM_ODD (0x04) +#define UART_UMR_PM_EVEN (0x00) +#define UART_UMR_BC_5 (0x00) +#define UART_UMR_BC_6 (0x01) +#define UART_UMR_BC_7 (0x02) +#define UART_UMR_BC_8 (0x03) +#define UART_UMR_CM_NORMAL (0x00) +#define UART_UMR_CM_ECH (0x40) +#define UART_UMR_CM_LOCAL_LOOP (0x80) +#define UART_UMR_CM_REMOTE_LOOP (0xC0) +#define UART_UMR_SB_STOP_BITS_1 (0x07) +#define UART_UMR_SB_STOP_BITS_15 (0x08) +#define UART_UMR_SB_STOP_BITS_2 (0x0F) + +/* Bit definitions and macros for USR */ +#define UART_USR_RXRDY (0x01) +#define UART_USR_FFULL (0x02) +#define UART_USR_TXRDY (0x04) +#define UART_USR_TXEMP (0x08) +#define UART_USR_OE (0x10) +#define UART_USR_PE (0x20) +#define UART_USR_FE (0x40) +#define UART_USR_RB (0x80) + +/* Bit definitions and macros for UCSR */ +#define UART_UCSR_TCS(x) (((x)&0x0F)) +#define UART_UCSR_RCS(x) (((x)&0x0F)<<4) +#define UART_UCSR_RCS_SYS_CLK (0xD0) +#define UART_UCSR_RCS_CTM16 (0xE0) +#define UART_UCSR_RCS_CTM (0xF0) +#define UART_UCSR_TCS_SYS_CLK (0x0D) +#define UART_UCSR_TCS_CTM16 (0x0E) +#define UART_UCSR_TCS_CTM (0x0F) + +/* Bit definitions and macros for UCR */ +#define UART_UCR_RXC(x) (((x)&0x03)) +#define UART_UCR_TXC(x) (((x)&0x03)<<2) +#define UART_UCR_MISC(x) (((x)&0x07)<<4) +#define UART_UCR_NONE (0x00) +#define UART_UCR_STOP_BREAK (0x70) +#define UART_UCR_START_BREAK (0x60) +#define UART_UCR_BKCHGINT (0x50) +#define UART_UCR_RESET_ERROR (0x40) +#define UART_UCR_RESET_TX (0x30) +#define UART_UCR_RESET_RX (0x20) +#define UART_UCR_RESET_MR (0x10) +#define UART_UCR_TX_DISABLED (0x08) +#define UART_UCR_TX_ENABLED (0x04) +#define UART_UCR_RX_DISABLED (0x02) +#define UART_UCR_RX_ENABLED (0x01) + +/* Bit definitions and macros for UIPCR */ +#define UART_UIPCR_CTS (0x01) +#define UART_UIPCR_COS (0x10) + +/* Bit definitions and macros for UACR */ +#define UART_UACR_IEC (0x01) + +/* Bit definitions and macros for UIMR */ +#define UART_UIMR_TXRDY (0x01) +#define UART_UIMR_RXRDY_FU (0x02) +#define UART_UIMR_DB (0x04) +#define UART_UIMR_COS (0x80) + +/* Bit definitions and macros for UISR */ +#define UART_UISR_TXRDY (0x01) +#define UART_UISR_RXRDY_FU (0x02) +#define UART_UISR_DB (0x04) +#define UART_UISR_RXFTO (0x08) +#define UART_UISR_TXFIFO (0x10) +#define UART_UISR_RXFIFO (0x20) +#define UART_UISR_COS (0x80) + +/* Bit definitions and macros for UIP */ +#define UART_UIP_CTS (0x01) + +/* Bit definitions and macros for UOP1 */ +#define UART_UOP1_RTS (0x01) + +/* Bit definitions and macros for UOP0 */ +#define UART_UOP0_RTS (0x01) +#endif /* CONFIG_MCFUART */ + /****************************************************************************/ -#endif /* mcfuart_h */ +#endif /* mcfuart_h */ |