diff options
Diffstat (limited to 'examples/eepro100_eeprom.c')
| -rw-r--r-- | examples/eepro100_eeprom.c | 210 |
1 files changed, 210 insertions, 0 deletions
diff --git a/examples/eepro100_eeprom.c b/examples/eepro100_eeprom.c new file mode 100644 index 000000000..656b2382b --- /dev/null +++ b/examples/eepro100_eeprom.c @@ -0,0 +1,210 @@ +/* + * Copyright 1998-2001 by Donald Becker. + * This software may be used and distributed according to the terms of + * the GNU General Public License (GPL), incorporated herein by reference. + * Contact the author for use under other terms. + * + * This program must be compiled with "-O"! + * See the bottom of this file for the suggested compile-command. + * + * The author may be reached as becker@scyld.com, or C/O + * Scyld Computing Corporation + * 410 Severn Ave., Suite 210 + * Annapolis MD 21403 + * + * Common-sense licensing statement: Using any portion of this program in + * your own program means that you must give credit to the original author + * and release the resulting code under the GPL. + */ + +#define _PPC_STRING_H_ /* avoid unnecessary str/mem functions */ +#define _LINUX_STRING_H_ /* avoid unnecessary str/mem functions */ + +#include <common.h> +#include <syscall.h> + +static int reset_eeprom(unsigned long ioaddr, unsigned char *hwaddr); + +int eepro100_eeprom(void) +{ + int ret = 0; + + unsigned char hwaddr1[6] = { 0x00, 0x00, 0x02, 0x03, 0x04, 0x05 }; + unsigned char hwaddr2[6] = { 0x00, 0x00, 0x02, 0x03, 0x04, 0x06 }; + +#if defined(CONFIG_OXC) + ret |= reset_eeprom(0x80000000, hwaddr1); + ret |= reset_eeprom(0x81000000, hwaddr2); +#endif + + return ret; +} + +/* Default EEPROM for i82559 */ +static unsigned short default_eeprom[64] = { + 0x0100, 0x0302, 0x0504, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0x40c0, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff +}; + +static unsigned short eeprom[256]; + +static int eeprom_size = 64; +static int eeprom_addr_size = 6; + +static int debug = 0; + +static inline unsigned short swap16(unsigned short x) +{ + return (((x & 0xff) << 8) | ((x & 0xff00) >> 8)); +} + +static inline void outw(short data, long addr) +{ + *(volatile short *)(addr) = swap16(data); +} + +static inline short inw(long addr) +{ + return swap16(*(volatile short *)(addr)); +} + +static inline void *memcpy(void *dst, const void *src, unsigned int len) +{ + void * ret = dst; + while (len-- > 0) *((char *)dst)++ = *((char *)src)++; + return ret; +} + +/* The EEPROM commands include the alway-set leading bit. */ +#define EE_WRITE_CMD (5) +#define EE_READ_CMD (6) +#define EE_ERASE_CMD (7) + +/* Serial EEPROM section. */ +#define EE_SHIFT_CLK 0x01 /* EEPROM shift clock. */ +#define EE_CS 0x02 /* EEPROM chip select. */ +#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */ +#define EE_DATA_READ 0x08 /* EEPROM chip data out. */ +#define EE_ENB (0x4800 | EE_CS) +#define EE_WRITE_0 0x4802 +#define EE_WRITE_1 0x4806 +#define EE_OFFSET 14 + +/* Delay between EEPROM clock transitions. */ +#define eeprom_delay(ee_addr) inw(ee_addr) + +/* Wait for the EEPROM to finish the previous operation. */ +static int eeprom_busy_poll(long ee_ioaddr) +{ + int i; + outw(EE_ENB, ee_ioaddr); + for (i = 0; i < 10000; i++) /* Typical 2000 ticks */ + if (inw(ee_ioaddr) & EE_DATA_READ) + break; + return i; +} + +/* This executes a generic EEPROM command, typically a write or write enable. + It returns the data output from the EEPROM, and thus may also be used for + reads. */ +static int do_eeprom_cmd(long ioaddr, int cmd, int cmd_len) +{ + unsigned retval = 0; + long ee_addr = ioaddr + EE_OFFSET; + + if (debug > 1) + mon_printf(" EEPROM op 0x%x: ", cmd); + + outw(EE_ENB | EE_SHIFT_CLK, ee_addr); + + /* Shift the command bits out. */ + do { + short dataval = (cmd & (1 << cmd_len)) ? EE_WRITE_1 : EE_WRITE_0; + outw(dataval, ee_addr); + eeprom_delay(ee_addr); + if (debug > 2) + mon_printf("%X", inw(ee_addr) & 15); + outw(dataval | EE_SHIFT_CLK, ee_addr); + eeprom_delay(ee_addr); + retval = (retval << 1) | ((inw(ee_addr) & EE_DATA_READ) ? 1 : 0); + } while (--cmd_len >= 0); +#if 0 + outw(EE_ENB, ee_addr); +#endif + /* Terminate the EEPROM access. */ + outw(EE_ENB & ~EE_CS, ee_addr); + if (debug > 1) + mon_printf(" EEPROM result is 0x%5.5x.\n", retval); + return retval; +} + +static int read_eeprom(long ioaddr, int location, int addr_len) +{ + return do_eeprom_cmd(ioaddr, ((EE_READ_CMD << addr_len) | location) + << 16 , 3 + addr_len + 16) & 0xffff; +} + +static void write_eeprom(long ioaddr, int index, int value, int addr_len) +{ + long ee_ioaddr = ioaddr + EE_OFFSET; + int i; + + /* Poll for previous op finished. */ + eeprom_busy_poll(ee_ioaddr); /* Typical 0 ticks */ + /* Enable programming modes. */ + do_eeprom_cmd(ioaddr, (0x4f << (addr_len-4)), 3 + addr_len); + /* Do the actual write. */ + do_eeprom_cmd(ioaddr, + (((EE_WRITE_CMD<<addr_len) | index)<<16) | (value & 0xffff), + 3 + addr_len + 16); + /* Poll for write finished. */ + i = eeprom_busy_poll(ee_ioaddr); /* Typical 2000 ticks */ + if (debug) + mon_printf(" Write finished after %d ticks.\n", i); + /* Disable programming. This command is not instantaneous, so we check + for busy before the next op. */ + do_eeprom_cmd(ioaddr, (0x40 << (addr_len-4)), 3 + addr_len); + eeprom_busy_poll(ee_ioaddr); +} + +static int reset_eeprom(unsigned long ioaddr, unsigned char *hwaddr) +{ + unsigned short checksum = 0; + int size_test; + int i; + + mon_printf("Resetting i82559 EEPROM @ 0x%08x ... ", ioaddr); + + size_test = do_eeprom_cmd(ioaddr, (EE_READ_CMD << 8) << 16, 27); + eeprom_addr_size = (size_test & 0xffe0000) == 0xffe0000 ? 8 : 6; + eeprom_size = 1 << eeprom_addr_size; + + memcpy(eeprom, default_eeprom, sizeof default_eeprom); + + for (i = 0; i < 3; i++) + eeprom[i] = (hwaddr[i*2+1]<<8) + hwaddr[i*2]; + + /* Recalculate the checksum. */ + for (i = 0; i < eeprom_size - 1; i++) + checksum += eeprom[i]; + eeprom[i] = 0xBABA - checksum; + + for (i = 0; i < eeprom_size; i++) + write_eeprom(ioaddr, i, eeprom[i], eeprom_addr_size); + + for (i = 0; i < eeprom_size; i++) + if (read_eeprom(ioaddr, i, eeprom_addr_size) != eeprom[i]) { + mon_printf("failed\n"); + return 1; + } + + mon_printf("done\n"); + return 0; +} + |