diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/misc/fsl_law.c | 54 | ||||
| -rw-r--r-- | drivers/net/fm/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/fm/init.c | 30 | ||||
| -rw-r--r-- | drivers/net/fm/p3060.c | 97 | ||||
| -rw-r--r-- | drivers/pci/fsl_pci_init.c | 116 | ||||
| -rw-r--r-- | drivers/qe/uec.c | 15 |
6 files changed, 199 insertions, 115 deletions
diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c index a7d04b7ea..223cd5d65 100644 --- a/drivers/misc/fsl_law.c +++ b/drivers/misc/fsl_law.c @@ -275,5 +275,59 @@ void init_laws(void) law_table[i].size, law_table[i].trgt_id); } +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE + /* check RCW to get which port is used for boot */ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + u32 bootloc = in_be32(&gur->rcwsr[6]); + /* + * in SRIO or PCIE boot we need to set specail LAWs for + * SRIO or PCIE interfaces. + */ + switch ((bootloc & FSL_CORENET_RCWSR6_BOOT_LOC) >> 23) { + case 0x0: /* boot from PCIE1 */ + set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS, + LAW_SIZE_1M, + LAW_TRGT_IF_PCIE_1); + set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS, + LAW_SIZE_1M, + LAW_TRGT_IF_PCIE_1); + break; + case 0x1: /* boot from PCIE2 */ + set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS, + LAW_SIZE_1M, + LAW_TRGT_IF_PCIE_2); + set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS, + LAW_SIZE_1M, + LAW_TRGT_IF_PCIE_2); + break; + case 0x2: /* boot from PCIE3 */ + set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS, + LAW_SIZE_1M, + LAW_TRGT_IF_PCIE_3); + set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS, + LAW_SIZE_1M, + LAW_TRGT_IF_PCIE_3); + break; + case 0x8: /* boot from SRIO1 */ + set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS, + LAW_SIZE_1M, + LAW_TRGT_IF_RIO_1); + set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS, + LAW_SIZE_1M, + LAW_TRGT_IF_RIO_1); + break; + case 0x9: /* boot from SRIO2 */ + set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS, + LAW_SIZE_1M, + LAW_TRGT_IF_RIO_2); + set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS, + LAW_SIZE_1M, + LAW_TRGT_IF_RIO_2); + break; + default: + break; + } +#endif + return ; } diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile index 072b178a0..cc5735475 100644 --- a/drivers/net/fm/Makefile +++ b/drivers/net/fm/Makefile @@ -36,10 +36,8 @@ COBJS-y += tgec_phy.o COBJS-$(CONFIG_P1017) += p1023.o COBJS-$(CONFIG_P1023) += p1023.o # The P204x, P304x, and P5020 are the same -COBJS-$(CONFIG_PPC_P2040) += p5020.o COBJS-$(CONFIG_PPC_P2041) += p5020.o COBJS-$(CONFIG_PPC_P3041) += p5020.o -COBJS-$(CONFIG_PPC_P3060) += p3060.o COBJS-$(CONFIG_PPC_P4080) += p4080.o COBJS-$(CONFIG_PPC_P5020) += p5020.o endif diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c index 953c359e6..736b8b958 100644 --- a/drivers/net/fm/init.c +++ b/drivers/net/fm/init.c @@ -50,6 +50,9 @@ struct fm_eth_info fm_info[] = { #if (CONFIG_SYS_NUM_FM2_DTSEC >= 4) FM_DTSEC_INFO_INITIALIZER(2, 4), #endif +#if (CONFIG_SYS_NUM_FM2_DTSEC >= 5) + FM_DTSEC_INFO_INITIALIZER(2, 5), +#endif #if (CONFIG_SYS_NUM_FM1_10GEC >= 1) FM_TGEC_INFO_INITIALIZER(1, 1), #endif @@ -152,6 +155,22 @@ void fm_info_set_phy_address(enum fm_port port, int address) } /* + * Returns the PHY address for a given Fman port + * + * The port must be set via a prior call to fm_info_set_phy_address(). + * A negative error code is returned if the port is invalid. + */ +int fm_info_get_phy_address(enum fm_port port) +{ + int i = fm_port_to_index(port); + + if (i == -1) + return -1; + + return fm_info[i].phy_addr; +} + +/* * Returns the type of the data interface between the given MAC and its PHY. * This is typically determined by the RCW. */ @@ -181,7 +200,8 @@ void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa, static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop) { - int off, ph; + int off; + uint32_t ph; phys_addr_t paddr = CONFIG_SYS_CCSRBAR_PHYS + info->compat_offset; u64 dtsec1_addr = (u64)CONFIG_SYS_CCSRBAR_PHYS + CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET; @@ -198,12 +218,10 @@ static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop) off = fdt_node_offset_by_compat_reg(blob, prop, paddr); /* Don't disable FM1-DTSEC1 MAC as its used for MDIO */ - if (paddr != dtsec1_addr) { - /* disable the mac node */ - fdt_setprop_string(blob, off, "status", "disabled"); - } + if (paddr != dtsec1_addr) + fdt_status_disabled(blob, off); /* disable the MAC node */ - /* disable the node point to the mac */ + /* disable the fsl,dpa-ethernet node that points to the MAC */ ph = fdt_get_phandle(blob, off); do_fixup_by_prop(blob, "fsl,fman-mac", &ph, sizeof(ph), "status", "disabled", strlen("disabled") + 1, 1); diff --git a/drivers/net/fm/p3060.c b/drivers/net/fm/p3060.c deleted file mode 100644 index c9748a954..000000000 --- a/drivers/net/fm/p3060.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <phy.h> -#include <fm_eth.h> -#include <asm/io.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_serdes.h> - -u32 port_to_devdisr[] = { - [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1, - [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2, - [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3, - [FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4, - [FM2_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC2_1, - [FM2_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC2_2, - [FM2_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC2_3, - [FM2_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC2_4, -}; - -static int is_device_disabled(enum fm_port port) -{ - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - u32 devdisr2 = in_be32(&gur->devdisr2); - - return port_to_devdisr[port] & devdisr2; -} - -void fman_disable_port(enum fm_port port) -{ - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - /* don't allow disabling of DTSEC1 as its needed for MDIO */ - if (port == FM1_DTSEC1) - return; - - setbits_be32(&gur->devdisr2, port_to_devdisr[port]); -} - -phy_interface_t fman_port_enet_if(enum fm_port port) -{ - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - u32 rcwsr11 = in_be32(&gur->rcwsr[11]); - - if (is_device_disabled(port)) - return PHY_INTERFACE_MODE_NONE; - - /* handle RGMII/MII first */ - if ((port == FM1_DTSEC1) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) == - FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1)) - return PHY_INTERFACE_MODE_RGMII; - - if ((port == FM1_DTSEC2) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) == - FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2)) - return PHY_INTERFACE_MODE_RGMII; - - if ((port == FM2_DTSEC1) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) == - FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1)) - return PHY_INTERFACE_MODE_RGMII; - - switch (port) { - case FM1_DTSEC1: - case FM1_DTSEC2: - case FM1_DTSEC3: - case FM1_DTSEC4: - if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1)) - return PHY_INTERFACE_MODE_SGMII; - break; - case FM2_DTSEC1: - case FM2_DTSEC2: - case FM2_DTSEC3: - case FM2_DTSEC4: - if (is_serdes_configured(SGMII_FM2_DTSEC1 + port - FM2_DTSEC1)) - return PHY_INTERFACE_MODE_SGMII; - break; - default: - return PHY_INTERFACE_MODE_NONE; - } - - return PHY_INTERFACE_MODE_NONE; -} diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 1d75a82bc..0d46c9631 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -211,6 +211,95 @@ static int fsl_pci_setup_inbound_windows(struct pci_controller *hose, return 1; } +#ifdef CONFIG_FSL_CORENET +static void fsl_pcie_boot_master(pit_t *pi) +{ + /* configure inbound window for slave's u-boot image */ + debug("PCIEBOOT - MASTER: Inbound window for slave's image; " + "Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n", + (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS, + (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1, + CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE); + struct pci_region r_inbound; + u32 sz_inbound = __ilog2_u64(CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE) + - 1; + pci_set_region(&r_inbound, + CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1, + CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS, + sz_inbound, + PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); + + set_inbound_window(pi--, &r_inbound, + CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE); + + /* configure inbound window for slave's u-boot image */ + debug("PCIEBOOT - MASTER: Inbound window for slave's image; " + "Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n", + (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS, + (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2, + CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE); + pci_set_region(&r_inbound, + CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2, + CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS, + sz_inbound, + PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); + + set_inbound_window(pi--, &r_inbound, + CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE); + + /* configure inbound window for slave's ucode and ENV */ + debug("PCIEBOOT - MASTER: Inbound window for slave's " + "ucode and ENV; " + "Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n", + (u64)CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS, + (u64)CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS, + CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE); + sz_inbound = __ilog2_u64(CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE) + - 1; + pci_set_region(&r_inbound, + CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS, + CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS, + sz_inbound, + PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); + + set_inbound_window(pi--, &r_inbound, + CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE); +} + +static void fsl_pcie_boot_master_release_slave(int port) +{ + unsigned long release_addr; + + /* now release slave's core 0 */ + switch (port) { + case 1: + release_addr = CONFIG_SYS_PCIE1_MEM_VIRT + + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET; + break; + case 2: + release_addr = CONFIG_SYS_PCIE2_MEM_VIRT + + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET; + break; + case 3: + release_addr = CONFIG_SYS_PCIE3_MEM_VIRT + + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET; + break; + default: + release_addr = 0; + break; + } + if (release_addr != 0) { + out_be32((void *)release_addr, + CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK); + debug("PCIEBOOT - MASTER: " + "Release slave successfully! Now the slave should start up!\n"); + } else { + debug("PCIEBOOT - MASTER: " + "Release slave failed!\n"); + } +} +#endif + void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) { u32 cfg_addr = (u32)&((ccsr_fsl_pci_t *)pci_info->regs)->cfg_addr; @@ -295,8 +384,25 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) /* see if we are a PCIe or PCI controller */ pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap); +#ifdef CONFIG_FSL_CORENET + /* boot from PCIE --master */ + char *s = getenv("bootmaster"); + char pcie[6]; + sprintf(pcie, "PCIE%d", pci_info->pci_num); + + if (s && (strcmp(s, pcie) == 0)) { + debug("PCIEBOOT - MASTER: Master port [ %d ] for pcie boot.\n", + pci_info->pci_num); + fsl_pcie_boot_master((pit_t *)pi); + } else { + /* inbound */ + inbound = fsl_pci_setup_inbound_windows(hose, + out_lo, pcie_cap, pi); + } +#else /* inbound */ inbound = fsl_pci_setup_inbound_windows(hose, out_lo, pcie_cap, pi); +#endif for (r = 0; r < hose->region_count; r++) debug("PCI reg:%d %016llx:%016llx %016llx %08lx\n", r, @@ -488,6 +594,16 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, if (fsl_is_pci_agent(hose)) { fsl_pci_config_unlock(hose); hose->last_busno = hose->first_busno; +#ifdef CONFIG_FSL_CORENET + } else { + /* boot from PCIE --master releases slave's core 0 */ + char *s = getenv("bootmaster"); + char pcie[6]; + sprintf(pcie, "PCIE%d", pci_info->pci_num); + + if (s && (strcmp(s, pcie) == 0)) + fsl_pcie_boot_master_release_slave(pci_info->pci_num); +#endif } pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap); diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c index 216c8982b..e6ae709db 100644 --- a/drivers/qe/uec.c +++ b/drivers/qe/uec.c @@ -580,8 +580,7 @@ static void phy_change(struct eth_device *dev) { uec_private_t *uec = (uec_private_t *)dev->priv; -#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ - defined(CONFIG_P1021) || defined(CONFIG_P1025) +#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025) ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); /* QE9 and QE12 need to be set for enabling QE MII managment signals */ @@ -592,8 +591,7 @@ static void phy_change(struct eth_device *dev) /* Update the link, speed, duplex */ uec->mii_info->phyinfo->read_status(uec->mii_info); -#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ - defined(CONFIG_P1021) || defined(CONFIG_P1025) +#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025) /* * QE12 is muxed with LBCTL, it needs to be released for enabling * LBCTL signal for LBC usage. @@ -1208,16 +1206,14 @@ static int uec_init(struct eth_device* dev, bd_t *bd) uec_private_t *uec; int err, i; struct phy_info *curphy; -#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ - defined(CONFIG_P1021) || defined(CONFIG_P1025) +#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025) ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); #endif uec = (uec_private_t *)dev->priv; if (uec->the_first_run == 0) { -#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ - defined(CONFIG_P1021) || defined(CONFIG_P1025) +#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025) /* QE9 and QE12 need to be set for enabling QE MII managment signals */ setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9); setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12); @@ -1249,8 +1245,7 @@ static int uec_init(struct eth_device* dev, bd_t *bd) udelay(100000); } while (1); -#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ - defined(CONFIG_P1021) || defined(CONFIG_P1025) +#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025) /* QE12 needs to be released for enabling LBCTL signal*/ clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12); #endif |